REVISION B NOTES: 1. NOT AVAILABLE AS STANDARD. 2. C REPRESENTS A CRITICAL DIMENSION. 3. BURR ALLOWANCE: .0015[0.038] MAX. 4. MINIMUM PUSHOUT FORCE: SIGNAL: .5 LB, GROUND: 1 LB. 5. MAX VARIANCE OF .002[0.05]. 6. DIMENSION APPLIES TO CONTACTS & GROUND PLANE. 7. GROUND PLANE PRESS HEIGHT MUST BE .003[0.08] LESS THAN THE MAX HEIGHT OR .001[0.03] GREATER THAN THE MINIMUM HEIGHT OF THE CONTACT. 8. PARTS TO BE PACKAGED IN TRAYS. DO NOT SCALE FROM THIS PRINT C1 .880 22.35 REF (((26 POS / 26) x .840[21.34]) + .040[1.02]) .0825 2.096 REF C2 4 BY SIGNING THIS DOCUMENT YOU ARE ACCEPTING THE CONDITIONS SET WITHIN. YOUR REQUIREMENTS MUST BE LISTED WITHIN THIS DRAWING. WHERE NO DIRECTION FROM THE CUSTOMER IS IDENTIFIED SAMTEC'S PROCESS REQUIREMENTS WILL BE USED. .320 8.13 REF 02 .275 6.99 REF CL .009 0.23 REF .173±.020 4.38±0.51 01 .535 13.59 REF .625 15.88 25 EQ SPACES @ .0250[.635] "A" 1 .451 11.46 EXCEPTIONS: PHONE No: PRINTED NAME: CUSTOMER SIGNATURE: COMPANY: DATE: .356 9.04 REF "A" .035 0.89 REF .810 20.57 REF NON STANDARD COMPONENT ITEM NO. PART NUMBER QUANTITY MATERIAL 1 QFSS-26-06.25-D-01-A 1.0000 VECTRA E130i, COLOR: BLACK 2 C-223-06.25-S 52.000 PHOS BRONZE, 521 EXTRA SPRING TEMPER 3 T-1G28-06.25-L 1.0000 PHOS BRONZE, 510 FULL HARD TEMPER 4 PPP-51 1.0000 46HF5040, COLOR: BLACK 5 TY-QFS012-026-6.25 1.0000 BLACK HIPS .040 1.02 REF (TYP) .686 17.42 REF ASSEMBLY TOOLING PROCESS UNLESS OTHERWISE SPECIFIED, DIMENSIONS ARE IN INCHES. TOLERANCES ARE: DECIMALS X ANGLES .XX: .01[.3] .XXX: .005[.13] .XXXX: .0020[.051] 2 PROPRIETARY NOTE THIS DOCUMENT CONTAINS INFORMATION CONFIDENTIAL AND PROPRIETARY TO SAMTEC, INC. AND SHALL NOT BE REPRODUCED OR TRANSFERRED TO OTHER DOCUMENTS OR DISCLOSED TO OTHERS OR USED FOR ANY PURPOSE OTHER THAN THAT WHICH IT WAS OBTAINED WITHOUT THE EXPRESSED WRITTEN CONSENT OF SAMTEC, INC. DO NOT SCALE DRAWING SHEET SCALE: 2.5:1 DESCRIPTION: ELEVATED QFS PLATING: CONTACT AREA: .000030 GOLD OVER .000050 NICKEL REMAINDER: .000200 REF TIN OVER .000050 NICKEL DWG. NO. C:\EnterpriseVault\DWG\MISC\MKTG\ASP-129646-01-MKT.SLDDRW BY: CLAY W PACKAGING OTHER 520 PARK EAST BLVD, NEW ALBANY, IN 47150 PHONE: 812-944-6733 FAX: 812-948-5047 e-Mail: [email protected] code: 55322 ASP-129646-01 12/13/2006 SHEET 1 OF 2 ASP-129646-01 RECOMMENDED PCB LAYOUT REVISION B .625 15.88 .016 0.41 .025 0.64 01 .046 1.17 NPTH (TYP 2 PLCS) .080 2.03 .340 8.64 .020 0.51 .085 2.16 (TYP) 02 CL .710 18.03 .810 20.57 (ALL DIMENSIONS ARE SYMMETRIC ABOUT THE CENTERLINE) IN-PROCESS C5 .004 0.10 C4 .134 3.40 (MEASURED CONTACT TO CONTACT) .371 +.004 +.004 +0.10 9.42 - .002 - 0.05 (SEE NOTE 5) +0.10 .371 - .002 9.42 - 0.05 (SEE NOTES 5, 6, & 7) .004[0.10] (SEE NOTE 6) C7 .004[0.10] (SEE NOTE 6) .050 1.26 REF 3 .320±.006 8.13±0.15 (APPLIES TO CONTACTS) SECTION "A"-"A" ITEM 4 NOT SHOWN FOR CLARITY 2 PROPRIETARY NOTE THIS DOCUMENT CONTAINS INFORMATION CONFIDENTIAL AND PROPRIETARY TO SAMTEC, INC. AND SHALL NOT BE REPRODUCED OR TRANSFERRED TO OTHER DOCUMENTS OR DISCLOSED TO OTHERS OR USED FOR ANY PURPOSE OTHER THAN THAT WHICH IT WAS OBTAINED WITHOUT THE EXPRESSED WRITTEN CONSENT OF SAMTEC, INC. SHEET SCALE: 5:1 VIEW 520 PARK EAST BLVD, NEW ALBANY, IN 47150 PHONE: 812-944-6733 FAX: 812-948-5047 e-Mail: [email protected] code: 55322 DESCRIPTION: DWG. NO. ELEVATED QFS ASP-129646-01 BY: CLAY W C:\EnterpriseVault\DWG\MISC\MKTG\ASP-129646-01-MKT.SLDDRW 12/13/2006 SHEET 2 OF 2