FMS (250V) Fuseholder Blocks & Clips www.schurter.com/pg02b Fuseholder Open Design, Holder for MSx 250, THT 250 VAC/DC · 6.3 A (UL/CSA) Description References Standards Weblinks -Through hole mounting -UL 4248-1 / UL 512 -CSA 4248-1 / no. 39 pdf, html, General Product Information, Approvals, RoHS, CHINA-RoHS, e-Shop, SCHURTER-Stock-Check, Distributor-Stock-Check Approvals -UL File Number: E39328 Technical Data Fuse-Link Mounting Terminal Rated Voltage Rated Current Degree of Protection Admissible Ambient Air Temp. Climatic Category Material: Socket Material: Terminals Unit Weight (Socket/Cap) Storage Conditions Product Marking Microfuse 250 V PCB Solder THT 250 VAC/DC 6.3 A (UL/CSA) IP 30 -40 °C to 85 °C 40/085/21 acc. to IEC 60068-1 Thermoplastic, UL 94V-0 Tin-Plated Copper Alloy 0.37 g 0 °C to 60 °C, max. 70% r.h. , Dimensions Soldering Methods Solderability Resistance to Soldering Heat Contact Resistance Dielectric Strength Impulse Withstand Voltage Insulation Resistance Overvoltage Category Pollution Degree Wave 235 °C / 2 sec acc. to IEC 60068-2-20, Test Ta, method 1 260 °C / 10 sec acc. to IEC 60068-2-20, Test Tb, method 1A < 7 mΩ at 20 mV > 3 kV between L-N (50 Hz; 1 min) > 4 kV between L-N > 10 MΩ between L-N (500 VDC; 1 min) I - III acc. to IEC 60664-1 1 - 3 acc. to IEC 60664-1 7.6 mm 4.4 3.2 1 4.3 8.5 5.08 ø 1.4 R 0.75 5.08 ø1 ø 9.5 ø 0.5 3 45˚ Drilling diagram Variant 0031.7601 Variants l Order Number 0031.7601 Packaging Unit Plastic box (100 pcs.) The specifications, descriptions and illustrations indicated in this document are based on Fuses current information. All content is subject to modifications and amendments. 15.06.2012 Holder