VISHAY BFC233621155

MKP336 2 X2
www.vishay.com
Vishay BCcomponents
Interference Suppression Film Capacitors
MKP Radial Potted Type
FEATURES
• 10 mm to 27.5 mm lead pitch
• Supplied loose in box, taped on reel
• Material categorization:
For definitions of compliance please see
www.vishay.com/doc?99912
APPLICATIONS
For standard across the line X2 applications
See also application note: www.vishay.com/doc?28153
QUICK REFERENCE DATA
Capacitance range (E12 series)
0.001 μF to 2.2 μF (preferred values acc. to E6)
Capacitance tolerance
± 20 %; ± 10 %; ± 5 %
Climatic testing class according to IEC 60068-1
55/110/56/B
Rated AC voltage
310 VAC; 50 Hz to 60 Hz
Permissible DC voltage
800 VDC at 85 °C, 630 VDC at 110 °C
C  470 nF: 110 °C (125 °C for less than 1000 h), C > 470 nF: 110 °C
Maximum application temperature
IEC 60384-14 ed 3 and EN60384-14
IEC 60065, pass. flamm. class B for volumes > 1750 mm3
CQC
UL 60384-14; CSA E384-14
Reference standards
Dielectric
Polypropylene film
Electrodes
Metallized film
Mono construction
Construction
Encapsulation
Plastic case, epoxy resin sealed, flame retardant UL-class 94 V-0
Leads
Tinned wire
C-value; tolerance; rated voltage; sub-class; manufacturer’s type designation;
code for dielectric material; manufacturer location; manufacturer’s logo;
year and week; safety approvals
Marking
Note
• For more detailed data and test requirements, contact: [email protected]
DIMENSIONS in millimeters
l
w
h
lt
P ± 0.4
Revision: 18-Dec-12
Ø dt
Document Number: 28120
1
For technical questions, contact: [email protected]
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
MKP336 2 X2
www.vishay.com
Vishay BCcomponents
COMPOSITION OF CATALOG NUMBER
TYPE AND PITCHES
MULTIPLIER
(nF)
CAPACITANCE
10.0 mm
(numerically)
336 2
15.0 mm
0.1
X2
22.5 mm
1
3
10
4
100
5
27.5 mm
Example:
104 = 10 x 10 = 100 nF
BFC2 336
2222(*) 336
2X
2X
2
XX X
XX X
(*) old ordering code
TYPE
PACKAGING
STANDARD DIMENSIONS
C-TOL.
Lead length 3.5 mm + 1 mm/- 0.5 mm or 3.5 mm ± 0.3 mm
Loose in box
Taped on reel
Lead length 5.0 mm ± 1.0 mm
(1)
Loose in box
Taped on reel
Loose in box
± 20 %
H = 18.5 mm; P0 = 12.7 mm
BFC2 336 23…
Lead length 3.5 mm + 1 mm/- 0.5 mm or 3.5 mm ± 0.3 mm
BFC2 336 21…
± 10 %
Taped on reel
PACKAGING
See tables
L ea d l en gth 25. 0 mm ± 2.0 mm
B FC 2 33 6 27 …
H = 18.5 mm; P0 = 12.7 mm
BFC2 336 24…
Lead length 3.5 mm + 1 mm/- 0.5 mm or 3.5 mm ± 0.3 mm
BFC2 336 22…
±5%
L ead le ngt h 2 5.0 mm ± 2 .0 mm
(1)
See tables
BFC2 336 26…
L ead length 5.0 mm ± 1.0 mm
336 2
X2
BFC2 336 20…
Lead length 25.0 mm ± 2.0 mm
L e a d l e n g th 5 . 0 m m ± 1. 0 m m
(1)
CODE NUMBER
B FC 2 33 6 28…
H = 18.5 mm; P0 = 12.7 mm
ALTERNATIVE LARGER PITCH SIZES
See tables
BFC2 336 25…
C-TOL.
CODE NUMBER
Lead length 3.5 mm + 1 mm/- 0.5 mm or 3.5 mm ± 0.3 mm
Loose in box
Lead length 5.0 mm ± 1.0 mm
± 20 %
Lead length 25.0 mm ± 2.0 mm
Taped on reel (1)
H = 18.5 mm; P0 = 12.7 mm
See tables for details
Lead length 3.5 mm + 1 mm/- 0.5 mm or 3.5 mm ± 0.3 mm
Loose in box
Lead length 5.0 mm ± 1.0 mm
± 10 %
Lead length 25.0 mm ± 2.0 mm
Taped on reel (1)(2)
H = 18.5 mm P0 = 12.7 mm
Notes
(1) For detailed tape specifications refer to packaging information: www.vishay.com/doc?28139
(2) Taped on reel pitch = 27.5 mm is not available
Revision: 18-Dec-12
Document Number: 28120
2
For technical questions, contact: [email protected]
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
MKP336 2 X2
www.vishay.com
Vishay BCcomponents
SPECIFIC REFERENCE DATA
DESCRIPTION
VALUE
310 V
Rated AC voltage URAC
630 V
Permissible DC voltage URDC
Tangent of loss angle:
at 1 kHz
C < 470 nF
470 nF  C 1 μF
C > 1 μF
at 10 kHz
 10 x
10-4
 20 x 10-4
20 x
10-4
 70 x 10-4
 30 x
10-4
-
Rated voltage pulse slope (dU/dt)R at 435 VDC
-
Pitch = 10 mm
600 V/μs
Pitch = 15 mm and 7.5 mm (bent back)
400 V/μs
Pitch = 22.5 mm
150 V/μs
Pitch = 27.5 mm
100 V/μs
R between leads, for C  0.33 μF at 100 V; 1 min
> 15 000 M
RC between leads, for C > 0.33 μF at 100 V; 1 min
> 5000 s
R between leads and case; 100 V; 1 min
> 30 000 M
Withstanding (DC) voltage (cut off current 10 mA) (1); rise time  1000 V/s:
C  1 μF
2200 V; 1 min
C > 1 μF
1800 V; 1 min
Withstanding (AC) voltage between leads and case
2120 V; 1 min
Max. application temperature for 0.001 μF  C  0.47 μF
110 °C (125 °C for less than 1000 h)
Max. application temperature for C > 0.47 μF
110 °C
Note
(1) See “Voltage Proof Test for Metalized Film Capacitors”: www.vishay.com/doc?28169
ELECTRICAL DATA AND ORDERING CODE - PITCH 10 mm
CATALOG NUMBER BFC2 336 ..... AND PACKAGING
URAC
(V)
DIMENSIONS
wxhxl
(mm)
CAP.
(μF)
REEL (500 mm) (1)(2)
LOOSE IN BOX
MASS
(g) (3)
SHORT LEADS
lt = 3.5 mm
+ 1 mm/- 0.5 mm
lt = 5.0 mm
± 1.0 mm
LONG LEADS
SPQ
lt = 25.0 mm
± 2.0 mm
H = 18.5 mm
P0 = 12.7 mm
SPQ
SPQ
PITCH = 10.0 mm ± 0.4 mm; dt = 0.6 mm ± 0.06 mm; C-TOL. = ± 20 %
0.0010
20102
29131
26102
0.0015
20152
29132
26152
0.0022
20222
29133
26222
23222
0.0033
20332
29134
26332
23332
20472
29135
26472
23472
20682
29136
26682
0.010
20103
29137
26103
0.015
20153
29138
26153
0.022
20223
29139
26223
0.033
20333
29141
0.0047
0.0068
310
4.0 x 10.0 x 12.5
0.6
1000
750
26333
23102
1250
1000
23152
23682
23103
1400
1100
23153
23223
750
23333
900
PITCH = 10.0 mm ± 0.4 mm; dt = 0.6 mm ± 0.06 mm; C-TOL. = ± 10 %
0.0010
21102
29154
27102
24102
0.0012
21122
-
27122
24122
0.0015
21152
29155
0.0018
4.0 x 10.0 x 12.5
21182
-
27182
24182
0.0022
21222
29156
27222
24222
Revision: 18-Dec-12
0.6
1000
27152
1250
24152
1400
Document Number: 28120
3
For technical questions, contact: [email protected]
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
MKP336 2 X2
www.vishay.com
Vishay BCcomponents
ELECTRICAL DATA AND ORDERING CODE - PITCH 10 mm
CATALOG NUMBER BFC2 336 ..... AND PACKAGING
URAC
(V)
DIMENSIONS
wxhxl
(mm)
CAP.
(μF)
REEL (500 mm) (1)(2)
LOOSE IN BOX
MASS
(g) (3)
SHORT LEADS
lt = 3.5 mm
+ 1 mm/- 0.5 mm
lt = 5.0 mm
± 1.0 mm
LONG LEADS
SPQ
lt = 25.0 mm
± 2.0 mm
H = 18.5 mm
P0 = 12.7 mm
SPQ
SPQ
PITCH = 10.0 mm ± 0.4 mm; dt = 0.6 mm ± 0.06 mm; C-TOL. = ± 10 %
0.0027
21272
-
27272
24272
0.0033
21332
29157
27332
24332
0.0039
21392
-
27392
24392
0.0047
21472
29158
27472
24472
0.0056
21562
-
27562
24562
0.0068
21682
29159
27682
24682
21822
-
21103
29161
0.0082
0.010
4.0 x 10.0 x 12.5
0.6
1000
27822
1000
27103
24822
24103
0.012
21123
-
27123
24123
0.015
21153
29162
27153
24153
0.018
21183
-
27183
24183
0.022
21223
29163
27223
24223
0.027
21273
-
0.033
21333
29164
750
1100
27273
750
27333
24273
24333
900
PITCH = 10.0 mm ± 0.4 mm; dt = 0.6 mm ± 0.06 mm; C-TOL. = ± 5 %
310
0.0010
22102
-
28102
0.0012
22122
-
28122
0.0015
22152
-
28152
0.0018
22182
-
28182
0.0022
22222
-
28222
25222
0.0027
22272
-
28272
25272
0.0033
22332
-
28332
25332
0.0039
22392
-
28392
25392
0.0047
22472
-
28472
25472
25562
0.0056
1000
25102
25122
1250
25152
22562
-
28562
0.0068
22682
-
28682
0.0082
22822
-
28822
0.010
22103
-
28103
25103
0.012
22123
-
28123
25123
0.015
22153
-
28153
25153
0.018
22183
-
28183
25183
0.022
22223
-
28223
25223
0.027
22273
-
0.033
22333
-
4.0 x 10.0 x 12.5
0.6
750
28273
28333
1400
25182
1000
750
25682
25822
25273
25333
1100
900
Notes
• SPQ = Standard Packing Quantity
(1) H = In-tape height; P = sprocket hole distance; for detailed specifications refer to packaging information: www.vishay.com/doc?28139
0
(2) Reel diameter = 356 mm is available on request
(3) Weight for short lead product only
Revision: 18-Dec-12
Document Number: 28120
4
For technical questions, contact: [email protected]
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
MKP336 2 X2
www.vishay.com
Vishay BCcomponents
ELECTRICAL DATA AND ORDERING CODE - PITCH 15 mm
CATALOG NUMBER BFC2 336 ..... AND PACKAGING
REEL (500 mm) (1)(2)
LOOSE IN BOX
URAC
(V)
CAP.
(μF)
0.010
0.015
0.022
0.033
0.047
0.068
0.10
0.15
0.22
310
DIMENSIONS
wxhxl
(mm)
0.010
0.012
0.015
0.018
0.022
0.027
0.033
0.039
0.047
0.056
0.068
0.082
0.10
0.12
0.15
0.18
0.22
0.010
0.012
0.015
0.018
0.022
0.027
0.033
0.039
0.047
0.056
0.068
0.082
0.10
0.12
0.15
0.18
5.0 x 11.0 x 17.5
6.0 x 12.0 x 17.5
7.0 x 13.5 x 17.5
5.0 x 11.0 x 17.5
6.0 x 12.0 x 17.5
7.0 x 13.5 x 17.5
5.0 x 11.0 x 17.5
6.0 x 12.0 x 17.5
7.0 x 13.5 x 17.5
MASS
(g) (3)
SHORT LEADS
LONG LEADS
lt = 3.5 mm
lt = 5.0 mm
lt = 25.0 mm
SPQ
SPQ
± 0.3 mm
± 1.0 mm
± 2.0 mm
PITCH = 15 mm ± 0.4 mm; dt = 0.60 ± 0.06 mm; C-TOL. = ± 20 %
29001
29273
29097
29011
29274
29071
29021
29275
29076
0.98
29031
29276
29082
1000
1000
20473
29142
26473
20683
29143
26683
20104
29144
26104
1.4
20154
29145
26154
500
PITCH = 15 mm ± 0.4 mm; dt = 0.80 ± 0.08 mm; C-TOL. = ± 20 %
1.8
20224
29146
500
26224
500
PITCH = 15 mm ± 0.4 mm; dt = 0.60 ± 0.06 mm; C-TOL. = ± 10 %
29002
29281
29066
29007
29068
29012
29282
29072
29017
29074
29022
29283
29077
29027
29079
1000
0.98
29032
29284
29083
1000
21393
27393
21473
29165
27473
21563
27563
21683
29166
27683
21823
27823
21104
29167
27104
21124
27124
500
1.4
21154
29168
27154
PITCH = 15 mm ± 0.4 mm; dt = 0.80 ± 0.08 mm; C-TOL. = ± 10 %
21184
27184
1.8
500
500
21224
29169
27224
PITCH = 15 mm ± 0.4 mm; dt = 0.60 ± 0.06 mm; C-TOL. = ± 5 %
29003
29067
29008
29069
29013
29073
29018
29075
29023
29078
29028
29081
1000
0.98
29033
29084
1000
22393
28393
22473
28473
22563
28563
22683
28683
22823
28823
22104
28104
22124
28124
500
1.4
22154
28154
PITCH = 15 mm ± 0.4 mm; dt = 0.80 ± 0.08 mm; C-TOL. = ± 5 %
1.8
22184
500
28184
500
H = 18.5 mm
P0 = 12.7 mm
SPQ
29004
29014
29024
29034
23473
23683
23104
23154
23224
29005
29009
29015
29019
29025
29029
29035
24393
24473
24563
24683
24823
24104
24124
24154
24184
24224
29006
29061
29016
29062
29026
29063
29036
25393
25473
25563
25683
25823
25104
25124
25154
25184
1100
900
650
600
1100
900
800
650
600
1100
900
800
650
600
Notes
• SPQ = Standard Packing Quantity
(1) H = In-tape height; P = sprocket hole distance; for detailed specifications refer to packaging information: www.vishay.com/doc?28139
0
(2) Reel diameter = 356 mm is available on request
(3) Weight for short lead product only
Revision: 18-Dec-12
Document Number: 28120
5
For technical questions, contact: [email protected]
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
MKP336 2 X2
www.vishay.com
Vishay BCcomponents
ELECTRICAL DATA AND ORDERING CODE - PITCH 22.5 mm
CATALOG NUMBER BFC2 336 ..... AND PACKAGING
REEL (500 mm) (1)(2)
LOOSE IN BOX
URAC
(V)
DIMENSIONS
wxhxl
(mm)
CAP.
(μF)
MASS
(g) (3)
SHORT LEADS
lt = 3.5 mm
± 0.3 mm
lt = 5.0 mm
± 1.0 mm
LONG LEADS
SPQ
lt = 25.0 mm
± 2.0 mm
H = 18.5 mm
P0 = 12.7 mm
SPQ
SPQ
PITCH = 22.5 mm ± 0.4 mm; dt = 0.80 mm ± 0.08 mm; C-TOL. = ± 20 %
0.15
0.22
6.0 x 15.5 x 26.0
2.4
0.33
0.47
7.0 x 16.5 x 26.0
2.9
29041
29277
29051
29278
20334
29147
20474
29148
29087
300
29093
500
26334
200
26474
500
29044
600
29053
550
23334
450
23474
400
PITCH = 22.5 mm ± 0.4 mm; dt = 0.80 mm ± 0.08 mm; C-TOL. = ± 10 %
0.12
29037
-
29085
29039
0.15
29042
29285
29088
29045
29047
-
29091
29049
29054
600
0.18
6.0 x 15.5 x 26.0
2.4
300
550
0.22
29052
29286
29094
0.27
21274
-
27274
24274
0.33
21334
29171
27334
24334
21394
-
27394
24394
27474
24474
500
310
450
0.39
7.0 x 16.5 x 26.0
2.9
0.47
200
21474
29172
400
PITCH = 22.5 mm ± 0.4 mm; dt = 0.80 mm ± 0.08 mm; C-TOL. = ± 5 %
0.12
29038
-
29086
29064
0.15
29043
-
29089
29046
600
0.18
29048
-
0.22
6.0 x 15.5 x 26.0
2.4
22224
-
300
29092
28224
29065
0.27
22274
-
28274
25274
0.33
22334
-
28334
25334
22394
-
28394
25394
550
500
25224
450
7.0 x 16.5 x 26.0
0.39
2.9
200
400
Notes
• SPQ = Standard Packing Quantity
(1) H = In-tape height; P = sprocket hole distance; for detailed specifications refer to packaging information: www.vishay.com/doc?28139
0
(2) Reel diameter = 356 mm is available on request
(3) Weight for short lead product only
Revision: 18-Dec-12
Document Number: 28120
6
For technical questions, contact: [email protected]
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
MKP336 2 X2
www.vishay.com
Vishay BCcomponents
ELECTRICAL DATA AND ORDERING CODE - PITCH 27.5 mm
CATALOG NUMBER BFC2 336 ..... AND PACKAGING
URAC
(V)
CAP.
(μF)
DIMENSIONS
wxhxl
(mm)
LOOSE IN BOX
MASS
(g) (1)
SHORT LEADS
lt = 3.5 mm
± 0.3 mm
lt = 5.0 mm
± 1.0 mm
LONG LEADS
SPQ
lt = 25.0 mm
± 2.0 mm
SPQ
150
PITCH = 27.5 mm ± 0.4 mm; dt = 0.80 mm ± 0.08 mm; C-TOL. = ± 20 %
0.47
9.0 x 19.0 x 31.5
29055
29279
29095
20684
29149
26684
5.5
0.68
1.0
11.0 x 21.0 x 31.0
7.4
20105
29151
100
26105
125
1.5
13.0 x 23.0 x 31.0
9.2
20155
29152
26155
2.2
15.0 x 25.0 x 31.5
12.3
20225
29153
26225
75
150
PITCH = 27.5 mm ± 0.4 mm; dt = 0.80 mm ± 0.08 mm; C-TOL. = ± 10 %
0.47
0.56
9.0 x 19.0 x 31.5
5.5
0.68
0.82
11.0 x 21.0 x 31.0
1.2
13.0 x 23.0 x 31.0
29096
-
27564
21684
29173
27684
21824
-
27824
21105
29174
21125
-
27125
21155
29175
27155
21185
-
27185
21225
29176
27225
125
100
27105
9.2
1.5
1.8
15.0 x 25.0 x 31.5
29287
7.4
1.0
310
29056
21564
12.3
2.2
75
PITCH = 27.5 mm ± 0.4 mm; dt = 0.80 mm ± 0.08 mm; C-TOL. = ± 5 %
0.47
0.56
9.0 x 19.0 x 31.5
5.5
0.68
0.82
11.0 x 21.0 x 31.0
-
28474
22564
-
28564
22684
-
28684
22824
-
28824
22105
-
22125
-
1.2
100
28105
28125
9.2
1.5
22155
-
28155
1.8
22185
-
28185
22225
-
28225
15.0 x 25.0 x 31.5
2.2
125
7.4
1.0
13.0 x 23.0 x 31.0
22474
12.3
75
Notes
• SPQ = Standard Packing Quantity
(1) Weight for short lead product only
Revision: 18-Dec-12
Document Number: 28120
7
For technical questions, contact: [email protected]
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
MKP336 2 X2
www.vishay.com
Vishay BCcomponents
APPROVALS
SAFETY APPROVALS X2
VOLTAGE
VALUE
FILE NUMBERS
310 VAC
1 nF to 2.2 μF
FI 2008038 A1
UL 60384-14
310 VAC
1 nF to 2.2 μF
E354331
CSA-E 384-14
310 VAC
1 nF to 2.2 μF
EN60384-14 (ENEC)
(= IEC 60384-14)
CQC
310 VAC
1 nF to 2.2 μF
CB test certificate
310 VAC
1 nF to 2.2 μF
E354331
CQC07001021280 (L)
CQC04001009262 (F)
FI 5123 A1
The ENEC-approval together with the CB-certificate replace all national marks of the following countries (they have already signed the
ENEC-agreement): Austria; Belgium; Czech. Republic; Denmark; Finland; France; Germany; Greece; Hungary; Ireland; Italy; Luxembourg;
Netherlands; Norway; Portugal; Slovenian; Spain; Sweden; Switzerland and United Kingdom.
MOUNTING
Normal Use
The capacitors are designed for mounting on printed-circuit boards.The capacitors packed in bandoliers are designed for
mounting in pinted-circuit boards by means of automatic insertion machines.
For detailed tape specifications refer to packaging information: www.vishay.com/doc?28139
Specific Method of Mounting to Withstand Vibration and Shock
In order to withstand vibration and shock tests, it must be insured that the stand-off pips are in good contact with the printed
circuit board:
• For pitches  15 mm capacitors shall be mechanically fixed by the leads
• For larger pitches the capacitors shall be mounted in the same way and the body clamped.
Space Requirements on Printed Circuit Board
The maximum space for length (Imax.), width (wmax.) and height (hmax.) of film capacitors to take in account on the printed circuit
board is shown in the drawings.
• For products with pitch  15 mm, w = l = 0.3 mm; h = 0.1 mm
• For products with 15 mm < pitch  27.5 mm, w = l = 0.5 mm; h = 0.1 mm
Eccentricity defined as in drawing. The maximum eccentricity is smaller than or equal to the lead diameter of the product
concerned.
wmax. = W + Δ
Eccentricity
Imax. = I + Δ
CBA116
hmax. = h + Δ
Seating plane
SOLDERING CONDITIONS
For general soldering conditions and wave soldering profile, we refer to the application note: 
“Soldering Guidelines for Film Capacitors”: www.vishay.com/doc?28171
Storage Temperature
Tstg = - 25 °C to + 35 °C with RH maximum 75 % without condensation
Ratings and Characteristics Reference Conditions
Unless otherwise specified, all electrical values apply to an ambient temperature of 23 °C ± 1 °C, an atmospheric pressure of
86 kPa to 106 kPa and a relative humidity of 50 % ± 2 %.
For reference testing, a conditioning period shall be applied over 96 h ± 4 h by heating the products in a circulating air oven at
the rated temperature and a relative humidity not exceeding 20 %.
Revision: 18-Dec-12
Document Number: 28120
8
For technical questions, contact: r[email protected]
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
MKP336 2 X2
www.vishay.com
Vishay BCcomponents
CHARACTERISTICS
10 3
2
1n
F
4.7
10 nF
nF
Impedance
(Ω)
ΔC/C
(%)
4
typical
47
n
10 F
0n
F
10 1
0
47
0
10 nF
00
nF
max.
-2
10 0
-4
10 -1
min.
-6
0
- 50
50
10 -2
4
10
Tamb (°C) 100
10
5
10
6
10
7
f (Hz) 10 8
Impedance as a function of frequency
(typical curve)
Capacitance as a function of ambient temperature
(typical curve)
102
f (MHz)
Dissipation
factor (x 10-4)
103
101
102
µF F
>1 1µ
C C≤
F
F < 220 n
0n
22 < C ≤
F
47 n
nF
47 F < C ≤
nF
0
n
1
10
C≤
101
X2
100
0
10
1
10
102
103
104
f (Hz)
105
10-1
1
3
100
1000 C (nF) 10 000
AC current
(mA)
10 4
AC voltage
(V)
10
10
Resonant frequency as a function of capacitance
(typical curve)
Tangent of loss angle as a function of frequency
(typical curve)
10
2200 nF
1000 nF
470 nF
2
100 nF
10 2
47 nF
10 1
10 nF
4.7 nF
10 0
1nF
Tamb ≤ 110 °C
10 1
1
10
10
Tamb ≤ 110 °C
2
10
3
10
4
f (Hz) 10 5
Max. RMS voltage as a function of frequency
(typical curve)
Revision: 18-Dec-12
10 -1
10 1
10 2
10 3
10 4
f (Hz) 10 5
Max. RMS current as a function of frequency
(typical curve)
Document Number: 28120
9
For technical questions, contact: [email protected]
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
MKP336 2 X2
www.vishay.com
Vishay BCcomponents
RC (s)
106
105
104
20
0
40
60
80
100
Tamb (°C)
Insulation resistance
APPLICATION NOTES
• For X2 electromagnetic interference suppression in standard across the line applications (50/60 Hz) with a maximum mains
voltage of 310 VAC.
• For series impedance applications we refer to the application note www.vishay.com/doc?28153
• For capacitors connected in parallel, normally the proof voltage and possibly the rated voltage must be reduced. For
information depending of the capacitance value and the number of parallel connections contact: [email protected]
• These capacitors are not intended for continuous pulse applications. For these situations, capacitors of the AC and pulse
programs must be used.
• The maximum ambient temperature must not exceed 110 °C (125 °C for less than 1000 h) for C  470 nF and 110 °C for
C > 470 nF
• Rated voltage pulse slope:
If the pulse voltage is lower than the rated voltage, the values of the specific reference data can be multiplied by 435 VDC and
divided by the applied voltage
INSPECTION REQUIREMENTS
General Notes
Sub-clause numbers of tests and performance requirements refer to the “Sectional Specification, IEC Publication
IEC 60384-14 ed 3 and Specific Reference Data”.
GROUP C INSPECTION REQUIREMENTS
SUB-CLAUSE NUMBER AND TEST
CONDITIONS
PERFORMANCE REQUIREMENTS
SUB-GROUP C1A PART OF
SAMPLE OF SUB-GROUP C1
4.1 Dimensions (detail)
As specified in chapters “General Data” of this
specification
Initial measurements
Capacitance
Tangent of loss angle:
For C  1 μF at 10 kHz
For C > 1 μF at 1 kHz
4.3 Robustness of terminations
Tensile: Load 10 N; 10 s
Bending: Load 5 N; 4 x 90°
4.4 Resistance to soldering heat
No pre-drying
Method: 1A
Solder bath: 280 °C ± 5 °C
Duration: 10 s
Revision: 18-Dec-12
No visible damage
Document Number: 28120
10
For technical questions, contact: [email protected]
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
MKP336 2 X2
www.vishay.com
Vishay BCcomponents
GROUP C INSPECTION REQUIREMENTS
SUB-CLAUSE NUMBER AND TEST
CONDITIONS
PERFORMANCE REQUIREMENTS
SUB-GROUP C1A PART OF
SAMPLE OF SUB-GROUP C1
4.19 Component solvent resistance
Isopropylalcohol at room temperature
Method: 2
Immersion time: 5 min ± 0.5 min
Recovery time:
Min. 1 h, max. 2 h
4.4.2 Final measurements
Visual examination
No visible damage
Legible marking
Capacitance
|C/C|  5 % of the value measured initially
Tangent of loss angle
Increase of tan :
 0.008 for: C  1 μF or
 0.005 for: C > 1 μF
Compared to values measured initially
Insulation resistance
As specified in section “Insulation resistance”
of this specification
SUB-GROUP C1B PART OF
SAMPLE OF SUB-GROUP C1
Initial measurements
Capacitance
Tangent of loss angle:
For C  1 μF at 10 kHz
For C > 1 μF at 1 kHz
4.20 Solvent resistance of the
marking: see section
“General notes”; item 5
Isopropylalcohol at room temperature
Method: 1
Rubbing material: Cotton wool
Immersion time: 5 min ± 0.5 min
4.6
A = - 55 °C
B = + 110 °C
5 cycles
Duration t = 30 min
Rapid change of temperature
4.6.1 Inspection
Visual examination
4.7
Mounting: See section “Mounting” of this
specification
Procedure B4
Frequency range: 10 Hz to 55 Hz
Amplitude: 0.75 mm or
Acceleration 98 m/s2
(whichever is less severe)
Total duration 6 h
Vibration
4.7.2 Final inspection
Visual examination
4.9
Mounting: See section “Mounting” for more
information
Pulse shape: Half sine
Acceleration: 490 m/s2
Duration of pulse: 11 ms
Shock
Revision: 18-Dec-12
No visible damage
Legible marking
No visible damage
No visible damage
Document Number: 28120
11
For technical questions, contact: [email protected]
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
MKP336 2 X2
www.vishay.com
Vishay BCcomponents
GROUP C INSPECTION REQUIREMENTS
SUB-CLAUSE NUMBER AND TEST
CONDITIONS
PERFORMANCE REQUIREMENTS
SUB-GROUP C1B PART OF
SAMPLE OF SUB-GROUP C1
4.9.2 Final measurements
Visual examination
No visible damage
Capacitance
|C/C|  5 % of the value measured initially
Tangent of loss angle
Increase of tan :
 0.008 for: C  1 μF or
 0.005 for: C > 1 μF
Compared to values measured initially
Insulation resistance
As specified in section “Insulation resistance”
of this specification
SUB-GROUP C1 
COMBINED SAMPLE OF
SPECIMENS OF SUB-GROUPS
C1A AND C1B
4.11
Climatic sequence
4.11.1 Initial measurements
Capacitance
Measured in 4.4.2 and 4.9.2
Tangent of loss angle:
Measured initially in C1A and C1B
4.11.2 Dry heat
Temperature: 110 °C
4.11.3 Damp heat cyclic
Test Db
First cycle
Duration: 16 h
4.11.4 Cold
Temperature: - 55 °C
4.11.5 Damp heat cyclic
Test Db
remaining cycles
Duration: 2 h
4.11.6 Final measurements
Visual examination
No visible damage
Legible marking
Capacitance
|C/C|  5 % of the value measured in 4.11.1.
Tangent of loss angle
Increase of tan :
 0.008 for: C  1 μF or
 0.005 for: C > 1 μF
Compared to values measured in 4.11.1.
Voltage proof
1350 VDC; 1 min between terminations
No permanent breakdown or flash-over

Insulation resistance
 50 % of values specified in section “Insulation
resistance” of this specification
SUB GROUP C2
4.12
Damp heat steady state
4.12.1 Initial measurements
Revision: 18-Dec-12
56 days, 40 °C, 90 % to 95 % RH
No load
Capacitance
Tangent of loss angle at 1 kHz
Document Number: 28120
12
For technical questions, contact: [email protected]
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
MKP336 2 X2
www.vishay.com
Vishay BCcomponents
GROUP C INSPECTION REQUIREMENTS
SUB-CLAUSE NUMBER AND TEST
CONDITIONS
PERFORMANCE REQUIREMENTS
SUB GROUP C2
4.12.3 Final measurements
Visual examination
No visible damage
Legible marking
Capacitance
|C/C|  5 % of the value measured in 4.12.1.
Tangent of loss angle
Increase of tan :
 0.008 for: C  1 μF or
 0.005 for: C > 1 μF
Compared to values measured in 4.12.1.
Voltage proof
1350 VDC; 1 min between terminations
No permanent breakdown or flash-over
Insulation resistance
 50 % of values specified in section “Insulation
resistance” of this specification
SUB-GROUP C3
4.13.1 Initial measurements
Capacitance
Tangent of loss angle:
For C  1 μF at 10 kHz
For C > 1 μF at 1 kHz
4.13
Impulse voltage
3 successive impulses, full wave, peak voltage:
2.5 kV for C  1 μF
2.5 kV/C for C > 1 μF
Max. 24 pulses
4.14
Endurance
Duration: 1000 h
1.25 x URAC at 110 °C
Once in every hour the voltage is increased to
1000 VRMS for 0.1 s via resistor of 47  ± 5 %
4.14.7 Final measurements
No selfhealing breakdowns or flashover
Visual examination
No visible damage
Legible marking
Capacitance
|C/C|  10 % compared to values measured in
4.13.1.
Tangent of loss angle
Increase of tan :
 0.008 for: C  1 μF or
 0.005 for: C > 1 μF
Compared to values measured in 4.13.1.
Voltage proof
1350 VDC; 1 min between terminations
2120 VAC; 1 min between terminations
and case
No permanent breakdown or flash-over
Insulation resistance
 50 % of values specified in section “Insulation
resistance” of this specification
SUB-GROUP C4
4.15
Charge and discharge
Revision: 18-Dec-12
10 000 cycles 
Charged to 435 VDC
Discharge resistance:

435 V DC
R = ------------------------------------------------ 
1.25 x C  dU/dt 
Document Number: 28120
13
For technical questions, contact: [email protected]
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
MKP336 2 X2
www.vishay.com
Vishay BCcomponents
GROUP C INSPECTION REQUIREMENTS
SUB-CLAUSE NUMBER AND TEST
CONDITIONS
PERFORMANCE REQUIREMENTS
SUB-GROUP C4
4.15.1 Initial measurements
Capacitance
Tangent of loss angle:
For C  1 μF at 10 kHz
For C > 1 μF at 1 kHz
4.15.3 Final measurements
Capacitance
|C/C|  10 % compared to values measured in
4.15.1.
Tangent of loss angle
Increase of tan :
 0.008 for: C  1 μF or
 0.005 for: C > 1 μF
Compared to values measured in 4.15.1.
Insulation resistance
 50 % of values specified in section “Insulation
resistance” of this specification
Resonance frequency
 0.9 times the value as specified in section
“Resonant frequency” of this specification
Bore of gas jet: Ø 0.5 mm
Fuel: Butane
Test duration for actual volume V in mm3:
V  250: 10 s
250 < V  500: 20 s
500 < V  1750: 30 s
V > 1750: 60 s
One flame application
After removing test flame from capacitor, the
capacitor must not continue to burn for more
than 10 s. No burning particle must drop from
the sample.
SUB-GROUP C5
4.16
Radio frequency
characteristic
SUB-GROUP C6
4.17
Passive flammability
Class B
12 mm
~ 8 mm
45.0°
SUB-GROUP C7
4.18
Active flammability
Revision: 18-Dec-12
20 cycles of 2.5 kV discharges on the test
capacitor connected to URAC.
The cheese cloth around the capacitors shall
not burn with a flame.
No electrical measurements are required.
Document Number: 28120
14
For technical questions, contact: [email protected]
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
Legal Disclaimer Notice
www.vishay.com
Vishay
Disclaimer
ALL PRODUCT, PRODUCT SPECIFICATIONS AND DATA ARE SUBJECT TO CHANGE WITHOUT NOTICE TO IMPROVE
RELIABILITY, FUNCTION OR DESIGN OR OTHERWISE.
Vishay Intertechnology, Inc., its affiliates, agents, and employees, and all persons acting on its or their behalf (collectively,
“Vishay”), disclaim any and all liability for any errors, inaccuracies or incompleteness contained in any datasheet or in any other
disclosure relating to any product.
Vishay makes no warranty, representation or guarantee regarding the suitability of the products for any particular purpose or
the continuing production of any product. To the maximum extent permitted by applicable law, Vishay disclaims (i) any and all
liability arising out of the application or use of any product, (ii) any and all liability, including without limitation special,
consequential or incidental damages, and (iii) any and all implied warranties, including warranties of fitness for particular
purpose, non-infringement and merchantability.
Statements regarding the suitability of products for certain types of applications are based on Vishay’s knowledge of typical
requirements that are often placed on Vishay products in generic applications. Such statements are not binding statements
about the suitability of products for a particular application. It is the customer’s responsibility to validate that a particular
product with the properties described in the product specification is suitable for use in a particular application. Parameters
provided in datasheets and/or specifications may vary in different applications and performance may vary over time. All
operating parameters, including typical parameters, must be validated for each customer application by the customer’s
technical experts. Product specifications do not expand or otherwise modify Vishay’s terms and conditions of purchase,
including but not limited to the warranty expressed therein.
Except as expressly indicated in writing, Vishay products are not designed for use in medical, life-saving, or life-sustaining
applications or for any other application in which the failure of the Vishay product could result in personal injury or death.
Customers using or selling Vishay products not expressly indicated for use in such applications do so at their own risk. Please
contact authorized Vishay personnel to obtain written terms and conditions regarding products designed for such applications.
No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this document or by
any conduct of Vishay. Product names and markings noted herein may be trademarks of their respective owners.
Material Category Policy
Vishay Intertechnology, Inc. hereby certifies that all its products that are identified as RoHS-Compliant fulfill the
definitions and restrictions defined under Directive 2011/65/EU of The European Parliament and of the Council
of June 8, 2011 on the restriction of the use of certain hazardous substances in electrical and electronic equipment
(EEE) - recast, unless otherwise specified as non-compliant.
Please note that some Vishay documentation may still make reference to RoHS Directive 2002/95/EC. We confirm that
all the products identified as being compliant to Directive 2002/95/EC conform to Directive 2011/65/EU.
Vishay Intertechnology, Inc. hereby certifies that all its products that are identified as Halogen-Free follow Halogen-Free
requirements as per JEDEC JS709A standards. Please note that some Vishay documentation may still make reference
to the IEC 61249-2-21 definition. We confirm that all the products identified as being compliant to IEC 61249-2-21
conform to JEDEC JS709A standards.
Revision: 02-Oct-12
1
Document Number: 91000
Mouser Electronics
Authorized Distributor
Click to View Pricing, Inventory, Delivery & Lifecycle Information:
Vishay:
BFC233626104 BFC233623104 BFC233620332 BFC233620103 BFC233620104 BFC233620225 BFC233624334
BFC233629088 BFC233626334 BFC233629083 BFC233629022 BFC233624223 BFC233627105 BFC233623682
BFC233620224 BFC233620105 BFC233629021 BFC233620334 BFC233620474 BFC233620473 BFC233620222
BFC233620333 BFC233620152 BFC233627103 BFC233629024 BFC233629087 BFC233627683 BFC233624332
BFC233629072 BFC233620154 BFC233627153 BFC233629297 BFC233620153 BFC233627152 BFC233629077
BFC233620155 BFC233629015 BFC233629014 BFC233623153 BFC233629011 BFC233621105 BFC233621155
BFC233623152 BFC233629012 BFC233621153 BFC233621103 BFC233629044 BFC233621154 BFC233627154
BFC233626223 BFC233623474 BFC233629096 BFC233621473 BFC233629093 BFC233623472 BFC233623473
BFC233629094 BFC233620102 BFC233629034 BFC233627223 BFC233623102 BFC233626472 BFC233620682
BFC233626474 BFC233621334 BFC233620683 BFC233629035 BFC233624102 BFC233624103 BFC233629032
BFC233620684 BFC233629031 BFC233624104 BFC233621332 BFC233629045 BFC233629041 BFC233624152
BFC233626224 BFC233621472 BFC233626225 BFC233624153 BFC233626222 BFC233621333 BFC233623332
BFC233629005 BFC233629004 BFC233629001 BFC233627474 BFC233621222 BFC233621152 BFC233627473
BFC233627333 BFC233627472 BFC233624682 BFC233621224 BFC233626152 BFC233621225 BFC233627334
BFC233623334 BFC233627104