CX11LHG AT CRYSTAL 16 MHz to 50 MHz High Shock, Ultra Low Profile, Ultra-Miniature AT Quartz Crystal DESCRIPTION CX11LHG is a high performance quartz crystal designed to survive the most extreme shock and high vibration application environments. Low acceleration sensitivity and low aging performance meets the most demanding requirements. Available with tight calibration tolerances and high stability over temperature. PACKAGE DIMENSIONS FEATURES Mechanical shock survivability up to 75,000 g Ultra-low profile - typical height of 0.5 mm Low acceleration sensitivity available Hermetically sealed ceramic package Excellent aging characteristics Full military testing available Designed, manufactured and tested in the USA APPLICATIONS Industrial & Communications TYPICAL inches mm 0.127 3.20 0.060 1.50 see below 0.028 0.71 DIM A B C D MAXIMUM inches mm 0.135 3.43 0.068 1.73 0.037 0.94 Down-hole Data Recorder Process Control THICKNESS (DIM C) Termination Engine Control Typical inches mm Maximum inches mm SM1 0.020 0.51 0.023 0.59 Telemetry SM2/SM4 0.021 0.53 0.024 0.60 Ruggedized Instrumentation SM3/SM5 0.023 0.58 0.025 0.63 Environmental Control Automotive Control Military & Aerospace SUGGESTED LAND PATTERN Smart Munitions Timing Devices (Fuzes) Surveillance Devices Missile Telemetry 0.099 (2.51) Ruggedized Communications 0.059 Aviation Equipment Inches (mm) 0.071 0.039 (0.99) 10193 Rev A STATEK CORPORATION 512 N. MAIN ST., ORANGE, CA 92868 714-639-7810 FAX: 714-997-1256 www.statek.com SPECIFICATIONS TERMINATIONS Specifications are typical at 25OC unless otherwise noted. Spe-cifications are subject to change without notice. Designation SM1 SM2 SM3 SM4 SM5 Fundamental Frequency1 Motional Resistance R1(Ω) 16.0 MHz 85 24.0 MHz 30 32.0 MHz 25 Motional Capacitance C1 (fF) 1.5 1.6 1.9 Quality Factor Q (k) 80 150 110 Shunt Capacitance C0 (pF) 0.7 0.7 0.9 Termination Gold Plated Solder Plated Solder Dipped Solder Plated (Lead Free) Solder Dipped (Lead Free) Max Process Temperature 260OC for 20 sec. Calibration Tolerance2 ±100 to ±30 ppm, or tighter as required Load Capacitance 10 pF (unless specified otherwise) Drive Level 200 µW MAX Frequency-Temperature Stability2,3 ±50 ppm to ±10 ppm (Commercial) EQUIVALENT CIRCUIT ±50 ppm to ±20 ppm (Industrial) ±100 ppm to ±30 ppm (Military) Aging, first year 5 ppm MAX Shock, survival up to 75,000 g, 0.3 ms, 1/2 sine Vibration, survival4 20 g, 10-2,000 Hz swept sine Operating Temp. Range -10OC to +70OC (Commercial) -40OC to +85OC (Industrial) -55OC to +125OC (Military) Storage Temp. Range -55OC to +125OC • Tray Pack Max Process Temperature 260OC for 20 sec. • 12 mm tape, 7”or 13” reels PACKAGING OPTIONS Per EIA 481 (see Tape and Reel data sheet 10109) 1. For frequencies above 50 MHz contact factory. 2. Other tolerances available. Contact factory. 3. Does not include calibration tolerance. The characteristics of the frequency stability over temperature follow that of the AT thickness-shear mode. 4. Per MIL-STD-202G, Method 204D, Condition D. Random vibration testing also available. HOW TO ORDER LOW PROFILE CX11LHG AT CRYSTALS CX11L S HG3 C SM1 — Blank = Standard S = Special or custom Blank = 5,000 g HG1 = 10,000 g HG2 = 20,000 g HG3 = 30,000 g HG4 = 50,000 g HG5 = 75,000 g C= Ceramic Lid SM1 = Gold Plated SM2 = Solder Plated SM3 = Solder Dipped SM4 = Solder Plated Lead Free SM5 = Solder Dipped Lead Free 24.0M , Frequency M = MHz 100 / Calibration Tolerance @ 250C (in ppm) 100 / / — / 100 Total Frequency Tolerance (in ppm) I / Temp. Range: C = -10OC to +70OC I = -40OC to +85OC M = -55OC to +125OC S = Customer Specified Frequency Stability over Temp.Range (in ppm) OR — — / I Temp. Range: C = -10OC to +70OC I = -40OC to +85OC M = -55OC to +125OC S = Customer Specified 10193 Rev A STATEK CORPORATION 512 N. MAIN ST., ORANGE, CA 92868 714-639-7810 FAX: 714-997-1256 www.statek.com