095 PLL-4TSI www.vishay.com Vishay BCcomponents Aluminum Capacitors Power Long Life 4-Terminal Snap-In FEATURES • Polarized aluminum electrolytic capacitors, non-solid electrolyte • Large types, minimized dimensions, cylindrical aluminum case, insulated with a blue sleeve • Pressure relief on the side of the aluminum case • Very long useful life: 10 000 h at 85 °C • Temperature range up to 85 °C • Keyed polarity • Low ESR, high ripple current capability • Compliant to RoHS Directive 2002/95/EC APPLICATIONS 096 smaller dimensions • • • • • • 095 Fig. 1 QUICK REFERENCE DATA DESCRIPTION Nominal case size (D x L in mm) Rated capacitance range CR Tolerance on CR Rated voltage range, UR Category temperature range Endurance test at 85 °C Useful life at 85 °C Useful life at 40 °C, 1.4 x IR applied Shelf life at 0 V, 85 °C Based on sectional specification Climatic category IEC 60068 Telecommunication and industrial systems Smoothing and filtering applications Switched mode power supplies Renewable energy power converters Energy storage in pulse systems For excellent mounting stability VALUE MARKING 35 x 50 to 45 x 100 The capacitors are marked (where possible) with the following information: • Rated capacitance (in μF) • Tolerance code on rated capacitance, code letter in accordance with IEC 60062 (M for ± 20 %) • Rated voltage (in V) • Date code (YYMM) • Name of manufacturer • Code for factory of origin • “-” sign to identify the negative terminal, visible from the top and side of the capacitor • Code number • Climatic category in accordance with IEC 60068 390 μF to 2200 μF ± 20 % 350 V to 450 V - 40 °C to + 85 °C 3000 h 10 000 h 400 000 h 1000 h IEC 60384-4/EN130300 40/085/56 SELECTION CHART FOR CR, UR, AND RELEVANT NOMINAL CASE SIZES (Ø D x L in mm) UR (V) CR (μF) 350 400 420 390 - - - 470 - 35 x 50 40 x 40 35 x 50 40 x 40 560 35 x 50 680 35 x 60 40 x 50 35 x 60 45 x 40 35 x 70 40 x 60 45 x 50 820 35 x 70 40 x 60 35 x 80 40 x 60 35 x 80 40 x 60 45 x 50 40 x 80 45 x 70 40 x 100 45 x 100 35 x 100 40 x 70 45 x 60 40 x 100 45 x 80 45 x 100 - 1000 1500 1800 2200 Revision: 10-Aug-11 35 x 60 35 x 70 40 x 60 45 x 50 35 x 80 40 x 70 45 x 50 35 x 100 40 x 80 45 x 60 40 x 100 45 x 80 45 x 100 - 1 450 35 x 50 40 x 40 35 x 60 40 x 50 45 x 40 35 x 70 40 x 60 35 x 80 40 x 60 45 x 50 40 x 70 45 x 60 40 x 100 45 x 70 45 x 100 - Document Number: 28393 For technical questions, contact: [email protected] THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 095 PLL-4TSI www.vishay.com Vishay BCcomponents DIMENSIONS in millimeters AND AVAILABLE FORMS PRINTED WIRING 2.5 1 3 2 2 L 3 - Ø D + 1 max. 15 ± 0.1 1 L + 5 max. 1.3 (4 x) 7.5 ± 0.1 4.9 ± 0.2 CCA976-1 17.5 ± 0.1 Fig. 2 - Printed wiring pin version (Case Ø D = 35 mm) Fig. 3 - Mounting hole diagram viewed from component side (Case Ø D = 35 mm) 2.5 1 4 - 3 2 3 - Ø D + 1 max. 2 4 20 ± 0.1 1 L + 5 max. L 1.3 (5 x) 10 ± 0.1 17.5 ± 0.1 20 ± 0.1 4.9 ± 0.2 Fig. 4 - Printed wiring pin version (Case Ø D = 40 mm) Fig. 5 - Mounting hole diagram viewed from component side (Case Ø D = 40 mm) FOUR TERMINAL SNAP-IN 60° 60° 60° B 60° A C dummy dummy ØD 22.5 ± 0.1 2 ± 0.1 (4 x) 22.5 Lmax. 6.3 ± 1 Bottom view Dummy terminals (A and C) must be free from the electrical circuit Fig. 6 - 4-Terminal snap-in Fig. 7 - Mounting hole diagram Pin numbers 2, 3 and 4 (if present) should be free from the electrical circuit or connected to the minus terminal. Revision: 10-Aug-11 2 Document Number: 28393 For technical questions, contact: [email protected] THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 095 PLL-4TSI www.vishay.com Vishay BCcomponents Table 1 DIMENSIONS in millimeters, MASS AND PACKAGING QUANTITIES NOMINAL CASE SIZE ØDxL Ø Dmax. 4T-SI Lmax. PW L+5 MASS (g) PACKAGING QUANTITIES (units per box) CARDBOARD BOX DIMENSIONS LxWxH 35 x 50 36 52 55 72 50 390 x 198 x 60 35 x 60 36 62 65 91 50 390 x 198 x 70 35 x 70 36 72 75 103 50 377 x 375 x 97 35 x 80 36 82 85 115 50 377 x 375 x 107 35 x 100 36 102 105 151 50 377 x 375 x 127 40 x 40 41 42 45 70 50 440 x 223 x 60 40 x 50 41 52 55 94 50 440 x 223 x 70 40 x 60 41 62 65 118 25 230 x 230 x 80 40 x 70 41 72 75 134 25 230 x 230 x 90 40 x 80 41 82 85 150 25 230 x 230 x 100 40 x 100 41 102 105 176 25 230 x 230 x 120 45 x 40 46 42 - 88 36 TBD 45 x 50 46 52 - 119 36 377 x 375 x 77 45 x 60 46 62 - 150 36 377 x 375 x 87 45 x 70 46 72 - 170 36 377 x 375 x 97 45 x 80 46 82 - 190 36 377 x 375 x 107 45 x 100 46 102 - 250 36 377 x 375 x 127 ORDERING EXAMPLE ELECTRICAL DATA SYMBOL Electrolytic capacitor 095 series 1000 μF/450 V; Nominal case size: Ø 40 mm x 100 mm DESCRIPTION CR Rated capacitance at 100 Hz IR Rated RMS ripple current at 100 Hz and 85 °C IL5 Max. leakage current after 5 min at UR 4-terminal snap-in: Max. equivalent series resistance at 100 Hz Ordering code: MAL2 095 27102 E3 Former 12NC: 2222 095 27102 ESR Z Max. impedance at 10 kHz Printed wiring: Note • Unless otherwise specified, all electrical values in Table 2 apply at Tamb = 20 °C, P = 86 kPa to 106 kPa, RH = 45 % to 75 % Ordering code: MAL2 095 77102 E3 Former 12NC: 2222 095 77102 Table 2 ELECTRICAL DATA AND ORDERING INFORMATION UR (V) CR 100 Hz (μF) NOMINAL CASE SIZE ØDxL (mm) IR 100 Hz 85 °C (A) IL5 5 min (μA) ESRmax. 100 Hz (m) Zmax. 10 kHz (m) 4T-SI PW 350 560 680 680 820 820 1000 1000 1000 1500 1500 1800 2200 35 x 50 35 x 60 40 x 50 35 x 70 40 x 60 35 x 80 40 x 60 45 x 50 40 x 80 45 x 70 40 x 100 45 x 100 3.4 4.0 4.1 4.5 4.6 5.1 5.0 5.0 6.5 6.5 7.5 8.6 396 480 480 578 578 704 704 704 1054 1054 1264 1544 196 162 165 135 137 112 116 121 79 82 66 57 120 99 102 82 85 68 73 78 50 53 42 37 15561E3 15681E3 25681E3 15821E3 25821E3 15102E3 25102E3 35102E3 25152E3 35152E3 25182E3 35222E3 65561E3 65681E3 75681E3 65821E3 75821E3 65102E3 75102E3 75152E3 75182E3 - Revision: 10-Aug-11 3 ORDERING CODE MAL2095....... Document Number: 28393 For technical questions, contact: [email protected] THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 095 PLL-4TSI www.vishay.com Vishay BCcomponents ELECTRICAL DATA AND ORDERING INFORMATION UR (V) 400 420 450 CR 100 Hz (μF) NOMINAL CASE SIZE ØDxL (mm) IR 100 Hz 85 °C (A) IL5 5 min (μA) ESRmax. 100 Hz (m) Zmax. 10 kHz (m) 4T-SI PW 470 470 560 560 680 680 680 820 820 1000 1000 1000 1500 1500 1800 470 470 560 680 680 680 820 820 820 1000 1000 1000 1500 1500 1800 390 390 470 470 470 560 560 680 680 680 820 820 1000 1000 1200 1500 35 x 50 40 x 40 35 x 60 45 x 40 35 x 70 40 x 60 45 x 50 35 x 80 40 x 60 35 x 100 40 x 70 45 x 60 40 x 100 45 x 80 45 x 100 35 x 50 40 x 40 35 x 60 35 x 70 40 x 60 45 x 50 35 x 80 40 x 70 45 x 50 35 x 100 40 x 80 45 x 60 40 x 100 45 x 80 45 x 100 35 x 50 40 x 40 35 x 60 40 x 50 45 x 40 35 x 70 40 x 60 35 x 80 40 x 60 45 x 50 40 x 70 45 x 60 40 x 100 45 x 70 40 x 100 45 x 100 3.2 3.0 3.7 3.2 4.1 4.3 4.3 4.7 4.6 5.9 5.2 5.4 7.2 6.7 7.9 3.1 3.0 3.6 4.1 4.3 4.3 4.6 4.8 4.6 5.8 5.4 5.4 7.2 6.7 7.8 2.9 2.8 3.4 3.5 3.0 3.8 4.0 4.3 4.3 4.3 4.8 5.0 6.0 5.6 6.4 7.4 380 380 452 452 548 548 548 660 660 804 804 804 1204 1204 1444 399 399 474 575 575 575 693 693 693 844 844 844 1264 1264 1516 355 355 427 427 427 508 508 616 616 616 742 742 904 904 1084 1354 215 222 180 192 149 151 156 125 129 102 107 110 72 75 63 232 238 194 161 163 167 134 136 143 110 112 117 77 80 67 246 253 204 208 217 172 174 143 147 153 123 126 99 104 85 71 126 132 105 116 87 89 93 73 77 60 64 67 43 47 38 141 147 119 98 100 104 82 84 91 67 69 75 48 51 43 142 148 118 121 129 99 101 82 87 91 72 76 57 63 50 42 16471E3 26471E3 16561E3 36561E3 16681E3 26681E3 36681E3 16821E3 26821E3 16102E3 26102E3 36102E3 26152E3 36152E3 36182E3 14471E3 24471E3 14561E3 14681E3 24681E3 34681E3 14821E3 24821E3 34821E3 14102E3 24102E3 34102E3 24152E3 34152E3 34182E3 17391E3 27391E3 17471E3 27471E3 37471E3 17561E3 27561E3 17681E3 27681E3 37681E3 27821E3 37821E3 27102E3 37102E3 27122E3 37152E3 66471E3 76471E3 66561E3 66681E3 76681E3 66821E3 76821E3 66102E3 76102E3 76152E3 64471E3 74471E3 64561E3 64681E3 74681E3 64821E3 74821E3 64102E3 74102E3 74152E3 67391E3 77391E3 67471E3 77471E3 67561E3 77561E3 67681E3 77681E3 77821E3 77102E3 77122E3 - Revision: 10-Aug-11 4 ORDERING CODE MAL2095....... Document Number: 28393 For technical questions, contact: [email protected] THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 095 PLL-4TSI www.vishay.com Vishay BCcomponents ADDITIONAL ELECTRICAL DATA PARAMETER CONDITIONS VALUE 350 V versions Us = 1.1 x UR Voltage Surge voltage Urev 1 Reverse voltage Current Leakage current After 1 min at UR IL1 0.006 CR x UR + 4 μA After 5 min at UR IL5 0.002 CR x UR + 4 μA All case sizes Ca. 20 nH Inductance Equivalent series inductance (ESL) RIPPLE CURRENT AND USEFUL LIFE CCC205-05 2.6 2.4 2.2 IA IR 2.0 1.8 1.6 1.4 lifetime multiplier 1.2 (1) 1.0 5 1. 2.0 0 3. 0 4. 0 6. 10 20 30 1.0 0.8 40 IA = Actual ripple current at 100 Hz IR = Rated ripple current at 100 Hz and 85 °C (1) Useful life at 85 °C and IR applied: 10 000 h 0.5 0.0 40 50 60 70 80 90 Tamb (°C) 100 Fig. 8 - Multiplier of useful life as a function of ambient temperature and ripple current load Table 3 MULTIPLIER OF RIPPLE CURRENT (IR) AS A FUNCTION OF FREQUENCY Revision: 10-Aug-11 FREQUENCY (Hz) IR MULTIPLIER 50 0.9 100 1.0 200 1.2 400 1.3 1000 1.4 10 000 1.5 5 Document Number: 28393 For technical questions, contact: [email protected] THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 095 PLL-4TSI www.vishay.com Vishay BCcomponents Table 4 TEST PROCEDURES AND REQUIREMENTS TEST NAME OF TEST Endurance REFERENCE IEC 60384-4/ EN130300 subclause 4.13 Useful life CECC 30301 subclause 4.13 Shelf life IEC 60384-4/ EN130300 subclause 4.17 Revision: 10-Aug-11 PROCEDURE REQUIREMENTS Tamb = 85 °C; UR applied; 3000 h C/C: ± 10 % ESR 1.3 x spec. limit Z 2 x spec. limit IL5 spec. limit Tamb = 85 °C; UR and IR applied; 10 000 h C/C: ± 30 % ESR 3 x spec. limit Z 3 x spec. limit IL5 spec. limit no short or open circuit, no visible damage total failure percentage 3 % Tamb = 85 °C; no voltage applied; 1000 h after test: UR to be applied for 30 min 24 h to 48 h before measurement 6 C/C: ± 10 % ESR 1.2 x spec. limit IL5 2 x spec. limit Document Number: 28393 For technical questions, contact: [email protected] THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 Legal Disclaimer Notice www.vishay.com Vishay Disclaimer ALL PRODUCT, PRODUCT SPECIFICATIONS AND DATA ARE SUBJECT TO CHANGE WITHOUT NOTICE TO IMPROVE RELIABILITY, FUNCTION OR DESIGN OR OTHERWISE. Vishay Intertechnology, Inc., its affiliates, agents, and employees, and all persons acting on its or their behalf (collectively, “Vishay”), disclaim any and all liability for any errors, inaccuracies or incompleteness contained in any datasheet or in any other disclosure relating to any product. Vishay makes no warranty, representation or guarantee regarding the suitability of the products for any particular purpose or the continuing production of any product. To the maximum extent permitted by applicable law, Vishay disclaims (i) any and all liability arising out of the application or use of any product, (ii) any and all liability, including without limitation special, consequential or incidental damages, and (iii) any and all implied warranties, including warranties of fitness for particular purpose, non-infringement and merchantability. Statements regarding the suitability of products for certain types of applications are based on Vishay’s knowledge of typical requirements that are often placed on Vishay products in generic applications. Such statements are not binding statements about the suitability of products for a particular application. It is the customer’s responsibility to validate that a particular product with the properties described in the product specification is suitable for use in a particular application. Parameters provided in datasheets and/or specifications may vary in different applications and performance may vary over time. All operating parameters, including typical parameters, must be validated for each customer application by the customer’s technical experts. Product specifications do not expand or otherwise modify Vishay’s terms and conditions of purchase, including but not limited to the warranty expressed therein. Except as expressly indicated in writing, Vishay products are not designed for use in medical, life-saving, or life-sustaining applications or for any other application in which the failure of the Vishay product could result in personal injury or death. Customers using or selling Vishay products not expressly indicated for use in such applications do so at their own risk and agree to fully indemnify and hold Vishay and its distributors harmless from and against any and all claims, liabilities, expenses and damages arising or resulting in connection with such use or sale, including attorneys fees, even if such claim alleges that Vishay or its distributor was negligent regarding the design or manufacture of the part. Please contact authorized Vishay personnel to obtain written terms and conditions regarding products designed for such applications. No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this document or by any conduct of Vishay. Product names and markings noted herein may be trademarks of their respective owners. Material Category Policy Vishay Intertechnology, Inc. hereby certifies that all its products that are identified as RoHS-Compliant fulfill the definitions and restrictions defined under Directive 2011/65/EU of The European Parliament and of the Council of June 8, 2011 on the restriction of the use of certain hazardous substances in electrical and electronic equipment (EEE) - recast, unless otherwise specified as non-compliant. Please note that some Vishay documentation may still make reference to RoHS Directive 2002/95/EC. We confirm that all the products identified as being compliant to Directive 2002/95/EC conform to Directive 2011/65/EU. Revision: 12-Mar-12 1 Document Number: 91000