part number: description: date: June 28, 2012 rev: A page: 1 of 2 10-01064 Cable, 1830 mm, 5.5x2.1x12 mm 90° 5000186 dc plug to stripped tinned, 24 AWG, 30-00003 wire Specifications: connector description dc plug, 5.5x2.1xL20.5 mm, molding style, spring contacts, for right angle applications, P/N 50-00186 overmold 30P, PVC, black, P/N 24-00006 strain relief 30P, PVC, black, P/N 23-00008 wire description 2C, 24 AWG, UL2468, 300V, 80C, 3.6 mm, VW-1, PVC, 65P, P/N 30-00003 cable outer diameter Ø3.6 mm cable color black cable length 1830 ± 50 mm rated current 4 A, 12 Vdc Notes: Function test: no open, no reversed polarity, no short circuit, no INT RoHS compliant Mechanical drawing: black wire Units: mm tolerance X: ±0.5 mm .X: ±0.3 mm striped wire .XX: ±0.05 mm applicable unless otherwise indicated in specification or on drawings Tensility International Corporation reserves the right to substitute parts which are functionally equivalent to the ones specified. Initial Date part number: description: 10-01064 Cable, 1830 mm, 5.5x2.1x12 mm 90° 5000186 dc plug to stripped tinned, 24 AWG, 30-00003 wire date: June 28, 2012 rev: A page: 2 of 2 Revision notes: Rev Date Description A June 28, 2012 initial release Specification Approval Spec sign-off verifies that you have reviewed the entire specification, tested a sample of the product, and confirm that it meets your requirements. This specification reflects the part as it will be ordered. Orders will not be processed until the specification pages have been initialed and the approval page has been signed. This specification is confidential and is not to be transmitted without prior approval from Tensility. SignatureTitle NameDate CompanyBranch