VISHAY BAV70-V_12

BAV70-V
Vishay Semiconductors
Small Signal Switching Diode, Dual
Features
• Silicon epitaxial planar diode
• Fast switching dual diode with common
cathode
• This diode is also available in other
configurations including:a dual common
anode to cathode with type designation
BAV99-V, a dual common anode with
type designation BAW56-V, and a single diode
with type designation BAL99-V.
• AEC-Q101 qualified
• Compliant to RoHS directive 2002/95/EC and in
accordance to WEEE 2002/96/EC
Mechanical Data
3
1
2
18108
Packaging Codes/Options:
GS18/10 k per 13" reel (8 mm tape), 10 k/box
GS08/3 k per 7" reel (8 mm tape), 15 k/box
Case: SOT-23
Weight: approx. 8.8 mg
Parts Table
Part
BAV70-V
Ordering code
Marking
Remarks
BAV70-V-GS18 or BAV70-V-GS08
JJ
Tape and Reel
Absolute Maximum Ratings
Tamb = 25 °C, unless otherwise specified
Parameter
Test conditions
Reverse voltage, peak reverse
voltage
Unit
VR, VRM
70
V
IF
250
mA
IFSM
2
A
tp = 1 ms
IFSM
1
A
tp = 1 s
IFSM
0.5
Ptot
Power dissipation
1)
Value
tp = 1 µs
Forward current (continuous)
Non repetitive peak forward
current
Symbol
350
1)
A
mW
Device on fiberglass substrate, see layout
Document Number 85546
Rev. 1.8, 12-Aug-10
For technical questions within your region, please contact one of the following:
[email protected], [email protected], [email protected]
www.vishay.com
1
BAV70-V
Vishay Semiconductors
Thermal Characteristics
Tamb = 25 °C, unless otherwise specified
Parameter
Test conditions
Symbol
Value
Unit
RthJA
4301)
°C/W
Tj
150
°C
Tj = Tstg
- 65 to + 150
°C
Thermal resistance junction to ambient air
Junction temperature
Storage temperature range
1)
Device on Fiberglass substrate, see layout on second page.
Electrical Characteristics
Tamb = 25 °C, unless otherwise specified
Parameter
Forward voltage
Reverse current
Diode capacitance
Reverse recovery time
Test condition
Symbol
Max.
Unit
IF = 1 mA
VF
Min.
Typ.
715
mV
IF = 10 mA
VF
855
mV
V
IF = 50 mA
VF
1
IF = 150 mA
VF
1.25
V
VR = 70 V
IR
2.5
µA
VR = 70 V, Tj = 150 °C
IR
50
µA
VR = 25 V, Tj = 150 °C
IR
30
µA
VR = 0, f = 1 MHz
CD
1.5
pF
IF = 10 mA to IR = 1 mA,
VR = 6 V, RL = 100 Ω
trr
6
ns
Typical Characteristics
Tamb = 25 °C, unless otherwise specified
IF - Forward Current (mA)
1000
100
Tj = 100 °C
10
25 °C
1
0.1
0.01
0 0.2 0.4 0.6 0.8 1.0 1.2 1.4 1.6 1.8 2.0
14356
Figure 1. Forward Current vs. Forward Voltage
www.vishay.com
2
22290
V F - Forward Voltage (V)
Figure 2. Peak Forward Current IFM = f (tp)
For technical questions within your region, please contact one of the following: Document Number 85546
[email protected], [email protected], [email protected]
Rev. 1.8, 12-Aug-10
BAV70-V
Vishay Semiconductors
Package Dimensions in millimeters (inches): SOT-23
0.45 (0.018)
0.35 (0.014)
0.35 (0.014)
0° t
o
0.5 (0.020)
0.45 (0.018)
0.9 (0.035)
1.15 (0.045)
8°
0.2 (0.008)
0.098 (0.004)
0.175 (0.007)
0.550 ref. (0.022 ref.)
0.1 (0.004) max.
3.1 (0.122)
2.8 (0.110)
0.3 (0.012)
2.6 (0.102)
2.35 (0.093)
0.7 (0.028)
0.95 (0.037)
0.9 (0.035)
1.43 (0.056)
1 (0.039)
0.9 (0.035)
Foot print recommendation:
2 (0.079)
1 (0.039)
0.9 (0.035)
1.20 (0.047)
0.45 (0.018)
0.35 (0.014)
0.95 (0.037)
Document no.: 6.541-5014.01-4
Rev. 8 - Date: 23.Sept.2009
17418
Document Number 85546
Rev. 1.8, 12-Aug-10
For technical questions within your region, please contact one of the following:
[email protected], [email protected], [email protected]
www.vishay.com
3
Legal Disclaimer Notice
www.vishay.com
Vishay
Disclaimer
ALL PRODUCT, PRODUCT SPECIFICATIONS AND DATA ARE SUBJECT TO CHANGE WITHOUT NOTICE TO IMPROVE
RELIABILITY, FUNCTION OR DESIGN OR OTHERWISE.
Vishay Intertechnology, Inc., its affiliates, agents, and employees, and all persons acting on its or their behalf (collectively,
“Vishay”), disclaim any and all liability for any errors, inaccuracies or incompleteness contained in any datasheet or in any other
disclosure relating to any product.
Vishay makes no warranty, representation or guarantee regarding the suitability of the products for any particular purpose or
the continuing production of any product. To the maximum extent permitted by applicable law, Vishay disclaims (i) any and all
liability arising out of the application or use of any product, (ii) any and all liability, including without limitation special,
consequential or incidental damages, and (iii) any and all implied warranties, including warranties of fitness for particular
purpose, non-infringement and merchantability.
Statements regarding the suitability of products for certain types of applications are based on Vishay’s knowledge of typical
requirements that are often placed on Vishay products in generic applications. Such statements are not binding statements
about the suitability of products for a particular application. It is the customer’s responsibility to validate that a particular
product with the properties described in the product specification is suitable for use in a particular application. Parameters
provided in datasheets and/or specifications may vary in different applications and performance may vary over time. All
operating parameters, including typical parameters, must be validated for each customer application by the customer’s
technical experts. Product specifications do not expand or otherwise modify Vishay’s terms and conditions of purchase,
including but not limited to the warranty expressed therein.
Except as expressly indicated in writing, Vishay products are not designed for use in medical, life-saving, or life-sustaining
applications or for any other application in which the failure of the Vishay product could result in personal injury or death.
Customers using or selling Vishay products not expressly indicated for use in such applications do so at their own risk and agree
to fully indemnify and hold Vishay and its distributors harmless from and against any and all claims, liabilities, expenses and
damages arising or resulting in connection with such use or sale, including attorneys fees, even if such claim alleges that Vishay
or its distributor was negligent regarding the design or manufacture of the part. Please contact authorized Vishay personnel to
obtain written terms and conditions regarding products designed for such applications.
No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this document or by
any conduct of Vishay. Product names and markings noted herein may be trademarks of their respective owners.
Material Category Policy
Vishay Intertechnology, Inc. hereby certifies that all its products that are identified as RoHS-Compliant fulfill the
definitions and restrictions defined under Directive 2011/65/EU of The European Parliament and of the Council
of June 8, 2011 on the restriction of the use of certain hazardous substances in electrical and electronic equipment
(EEE) - recast, unless otherwise specified as non-compliant.
Please note that some Vishay documentation may still make reference to RoHS Directive 2002/95/EC. We confirm that
all the products identified as being compliant to Directive 2002/95/EC conform to Directive 2011/65/EU.
Revision: 12-Mar-12
1
Document Number: 91000