Clipped-Sine & HCMOS OCXO Oven Controlled Crystal Oscillator • Frequency range 2.0MHz ~ 150.0MHz • Excellent temperature stabilities • Fast warm-up, low power consumption • High precision glass overtone crystal CO603 Specifications: CO-D Frequency Range: 2.0 MHz or 150.0 MHz Operating Temperature: Storage Temperature: 0°C ~ +50°C -A -10°C ~ +45°C -B -10°C ~ +55°C -C -20°C ~ +60°C -D -30°C ~ +70°C -E -40°C ~ +85°C Frequency Stability: Accuracy: Vs. Temperature: Short-Term Stability: Aging Rate: ± 5 x 10-9 ± 5 x 10-7 ± 1 x 10-7 ± 5 x 10-8 ± 1 x 10-8 ± 5 x 10-9 ± 5 x 10-12 ± 1 x 10-10 ± 5 x 10-9 - 57 - 17 - 58 - 18 - 59 per second per day per year max Output Waveform: Clipped-Sine Wave, HCMOS Output Level: 1.0 Vp-p min clippled-sine @ 1KΩ TTL, HCMOS compatible Phase Noise: -100dBc/Hz -130sBc/Hz -140dBc/Hz -145dBc/Hz Harmonics Distortion: Supply Voltage: Supply Current: Frequency Adjust: @ 10 Hz @ 100 Hz @ 1 KHz @ 10 KHz Pin -25 dB +5.0 VDC (± 5%) +12.0 VDC (± 5%) Vref 3 Vc/Nc 4 Ground 5 Output 6 Vcc Ground 500mA max atwarm-up 150mA max after warm-up at 25°C ±3.0 ppm tuning via All dimensions are in mm ext Note: 1. Other frequencies, stabilities, and operating temperature ranges available. Consult VTC Support for specific requirements. 2. Not all combinations of the above, stabilities, and temperature ranges are available. Consult VTC Support if your requirement is not standard. 3. All specifications subject to change without notice. June 2001 Vcc 2 -P potentiometer Phone: +86 10 6301 4184 Configurations 1 Fax: +86 10 6301 9167 Ordering Information Product name + Temperature + Stability + Frequency + Other Specification Code. i.e. CO603C18-10.0MHz or CO603D58P-10.0MHz Email: [email protected] Web: http://www.vanlong.com Vanlong Technology Co., Ltd.