DATA SHEET UF300G~UF3010G SEMICONDUCTOR ULT RAFAST SWITCHING RECTIFIER VOLTAGE - 50 to 1000 Volts CURRENT - 3.0 Amperes FEATURES • Plastic package has Underwriters Laboratory Flammability Classification 94V-O utilizing Flame Retardant Epoxy Molding Compound DO-201AD Unit:inch(mm) • Void-free Plastic in DO-201AD package • 2.0 ampere operation at TA=55°C J with no thermal runaway • Exceeds environmental standards of MIL-S-19500/228 • Ultra fast switching for high efficiency .210 (5.3) .188 (4.8) DIA. • High temperature soldering : 260OC / 10 seconds at terminals • Pb free product at available : 99% Sn above meet RoHS environment 1.0 (25.4) MIN. substance directive request MECHANICAL DATA .375 (9.5) .285 (7.2) • Case: Glass passivation, DO-201AD • Terminals: Axial leads, solderable per MIL-STD-202, Method 208 • Polarity: Band denotes cathode • Mounting Position: Any 1.0 (25.4) MIN. .052 (1.3) .048 (1.2) DIA. • Weight: 0.041 ounce, 1.1 gram MAXIMUM RATINGS AND ELECTRICAL CHARACTERISTICS Ratings at 25 OC J ambient temperature unless otherwise specified. Single phase, half wave, 60 Hz, resistive or inductive load. SYMBOL UF300G UF301G UF302G UF304G UF306G UF308G UF3010G UNITS Peak Reverse Voltage, Pepet itive ; VRM 50 100 200 400 600 800 1000 V Maximum RMS Voltage 35 70 140 280 420 560 700 V 50 100 200 400 600 800 1000 V DC Bl ocki ng Voltage; VR Average Forward Current, Io @TA=55 °C 3.8” lead l ength, 60Hz, resistive or inductive load 3.0 A 150 A Peak Forward Surge Current IFM (surge) 8.3msec . single half sine-wave superimposed on rated load (JEDEC method) Maximum Forward Voltage VF @1.0A, 25 °C VF 1.00 1.3 Maxi mum Reverse Current, @ Rated TA =25 °C Reverse Voltage TA=100 °C CJ Typical Junction Resi stance (Note 2) R JA RθJL 75.0 µA 50.0 50 75 -55 to +150 TSTG pF °C/W 20.0 TRR V µA 500 Reverse Recovery Time Operating and Storage Temperature Range 1.7 10.0 IR Typical Junction capacitance (Note 1) CJ IF=.5A, IR=1A, Irr =.25A 1.5 ns °C NOTES: 1. Measured at 1 MHz and applied reverse voltage of 4.0 VDC 2. Thermal resistance from junction to ambient and from junction to lead length 0.375”(9.5mm) P.C.B. mounted http://www.yeashin.com 1 REV.02 20110725 RATING AND CHARACTERISTIC CURVES UF300G~UF3010G trr +0.5A 0 -0.25 -1.0 NOTE:1.Rise Time = 7ns max. Input Impedance = 1 megohm. 22pF 2.Rise Time = 10ns max. 1cm SET TIME BASE FOR 50 ns/cm Source Impedance = 50 Ohms Fig. 1-REVERSE RECOVERY TIME CHARACTERISTIC AND TEST CIRCUIT DIAGRAM AVERAGE FORWARD CURRENT (10)-AMP (10)-AAV 10 UF300G TYPICAL IFM, Apk 1 UF3010G TJ = 25 °C 0.1 0.01 0 .2 .4 .6 .8 1.0 1.2 1.4 4.0 3.0 .375" 9.5mm LENGTH 2.0 1.0 0 25 50 75 100 125 150 175 AMBIENT TEMPERATURE, FORWARD VOLTAGE-VFM(Vpk) Fig. 2-FORWARD CHARACTERISTICS Fig. 3-FORWARD CURRENT DERATING CURVE 10 TJ = 125 °C PEAD FORWARD SURGE CURRENT, AMPERES INSTANTANEOUS REVERSE LEAKAGE CURRENT, MICROAMPERES 100 TJ = 100 °C 1 TJ = 25 °C 0.1 0.01 0 20 40 60 80 100 120 140 PERCENT OF RATED PEAK REVERSE VOLTAGE, % Fig. 4-TYPICAL REVERSE LEAKAGE CHARACTERISTICS http://www.yeashin.com 200 1.6 150 120 90 60 30 0 1 2 4 6 8 10 20 40 60 80 100 NUMBER OF CYCLES AT 60Hz Fig. 5-PEAK FORWARD SURGE CURRENT 2 REV.02 20110725