SUBMINIA TURE FUSES UBMINIATURE WICKMANN TR5® / No. 372 IEC 60127-3/IV 60127-3/IV,, 250V 250V,, T Specifications Time-Current Characteristic Packaging Time Lag (T) 000: Tape/Ammopack (1000 pcs.) 041: Short Leads - Bulk (1000 pcs.) Standard Materials IEC 60127-3/IV Base/Cap: Brown Thermoplastic Polyamide PA 6.6, UL 94V0 Round Pins: Copper alloy, tin plated Approvals VDE: License No. 97187 License No. 116448 (5A) SEMKO: Certificate No. 9812212 Certificate No. 9748179 (5A) cULus Recognized: File No. E 67006 MITI: File No. 32-1888 -40ºC to +85ºC (consider de-rating) Climatic Category -25ºC/+70ºC/21 days (EN 60068-1..3) Features Dimensions 2 (mm) Reduced PCB space requirements Direct solderable or plug-in versions Internationally approved Low internal resistance Shocksafe casing max. 8 ∅ 8,5 Data Sheet www.wickmann.com/products/372.pdf Approval Certificates 1 +0,1 260ºC, ≤ 3 sec. (Wave) 350ºC, ≤ 1 sec. (Hand) Page 58 www.wickmann.com/itcurves Soldering Heat Resistance 260ºC, 10 sec. (IEC 60068-2-20) Packaging Page 118 www.wickmann.com/pack Long Leads (L=18.8mm) Short Leads (L=4.3mm) Marking , 372, 250V, T, Current Rating, Approvals FaxBack Document # 300 Unit Weight 0.77g (approx.) > 1h 2.1 x IRated 2.75 x IRated < 2 min 400ms ... 10s 4 x IRated 10 x IRated 150ms ... 3s 20ms ... 150ms Permissible continuous operating current is ≤ 100 % at ambient temperature of 23ºC (73.4ºF). 100% Rated Amp Voltage Breaking Voltage Drop Power Dissipation Melting Integral 1.5 x IRated 10 x IRated Current Code Rating Capacity 1.0 x IRated max. (mV) max. (mW) min. (A2s) 50mA 63mA 80mA 100mA 125mA 160mA 200mA 250mA 315mA 400mA 500mA 630mA 800mA 1.00A 1.25A 1.60A 2.00A 2 2.50A 2 3.15A 2 4.00A 5.00A 0050 0063 0080 0100 0125 0160 0200 0250 0315 0400 0500 0630 0800 1100 1125 1160 1200 1250 1315 1400 1500 250V 250V 250V 250V 250V 250V 250V 250V 250V 250V 250V 250V 250V 250V 250V 250V 250V 250V 250V 250V 250V 35A / 250VAC 1 50-60Hz cos ϕ = 1.0 40A / 250VAC 50A / 250VAC 500 400 370 300 260 200 170 150 140 130 125 120 110 110 95 95 85 80 80 75 80 70 80 100 110 120 130 140 150 160 170 180 200 220 360 450 450 600 700 1100 1200 1300 0.01 0.02 0.023 0.047 0.066 0.14 0.2 0.28 0.36 0.9 1.3 2.5 3.8 5.5 9 14 23 35 60 95 94 Approvals • • • • • • • • • • • • • • • • • • • • G • • • • • • • • • • • • • • • • • • • • G • • • • • • • • • • • • • • • • • • • • • MITI 1.5 x IRated cURus Rated Current SEMKO Limits for Pre-arcing Time 50mA ... 5.00A Lead Pull Strength Solderability Time-Current Curve Holes in PCB Vibration Resistance 10N (EN 60068-2-21) www.wickmann.com/approvals 5,08 +10ºC to +60ºC relative humidity ≤ 75% yearly average, without dew, maximum value for 30 days-95% VDE ∅ 0,6 Stock Conditions 24 cycles at 15 min. each (EN 60068-6) 10 - 60Hz at 0.75mm amplitude 60 - 2000Hz at 10g acceleration WebLinks 0,5 min L Operating TTemperature emperature • • • • • • • 1 Per UL, approved breaking capacity is 50 A at 250V. G Expert Report 2 Contact WICKMANN for alternative version rated at 250V, Series No. 392. Order Information 010827 Qty. WebSite: www.wickmann.com FaxBack: +1 (404) 699-6176 OrderNumber Series 372 Amp Code Packaging • Europe Tel: +49 (2302) 662-107 • Americas Tel: +1 (404) 699-7820 • Asia Tel: +852 26 14-1108 E-mail: [email protected] E-mail: [email protected] E-mail: [email protected] SUBMINIA TURE FUSES UBMINIATURE WICKMANN 10 TR5® / No. 372 0 ,0 00 I-t C haracte ristic s (M in-M ax Lim it) 10 IEC 6 01 27 -3/IV ,0 0 0 1 ,0 00 10 10 Time (sec.) 0 1 0 .1 0 .0 1 0 .0 01 1 1 .5 2 3 4 5 6 7 8 9 10 15 I Fault / IRated Contact WICKMANN for individual I-t curves 010827 WebSite: www.wickmann.com FaxBack: +1 (404) 699-6176 • Europe Tel: +49 (2302) 662-107 • Americas Tel: +1 (404) 699-7820 • Asia Tel: +852 26 14-1108 E-mail: [email protected] E-mail: [email protected] E-mail: [email protected]