ETC 2.22211E+11

Philips Components
Product specification
Aluminium electrolytic capacitors
Power Eurodin Screw Terminals
114/115 PED-ST
FEATURES
• Polarized aluminium electrolytic
capacitors, non-solid
handbook, 4 columns
• Large types, cylindrical aluminium
case, insulated with a blue sleeve
• Also available in bolt version
(PED-STB)
• Pressure relief in the sealing
• Charge and discharge proof
• Extremely low ESR and ESL
allowing very high ripple current
load, achieved by a special
construction with multiple internal
anode and cathode connections
MBC432 - 1
ST
• Very long useful life:
20000 hours at 85 °C
STB
Fig.1 Component outlines.
• High resistance to shock and
vibration achieved by longitudinal
rills and special internal
construction.
086/087 PS-ST
larger case sizes
APPLICATIONS
• Computer, telecommunications
and industrial systems
smaller
CV-values
in DIN PW
handbook, 4 columns
050/052 PEC-PW
114/115 PED-ST
higher
CV/volume
154/155 PEC-ST
CCB028
• Smoothing and filtering
larger case sizes
high ripple 105 °C
• Standard and switched mode
power supplies
088/089 PHC-ST
• Energy storage in pulse systems.
QUICK REFERENCE DATA
VALUE
DESCRIPTION
114
Case size (∅Dnom × Lnom in mm)
115
35 × 60 to 75 × 105
150 to 220000 µF
Rated capacitance range (E6 series), CR
−10 to +30%
Tolerance on CR
Rated voltage range, UR
10 to 100 V
250 to 400 V
−40 to +85 °C
Category temperature range
Endurance test at 85 °C
8000 hours (400 V: 2000 hours)
Useful life at 85 °C
20000 hours (400 V: 5000 hours)
Useful life at 40 °C, 1.4 × IR applied
350000 hours (400 V: 90000 hours)
Shelf life at 0 V, 85 °C
500 hours
Based on sectional specification
IEC 384-4/CECC 30300
Climatic category IEC 68
1998 Mar 16
40/085/56
1
Philips Components
Product specification
Aluminium electrolytic capacitors
Power Eurodin Screw Terminals
114/115 PED-ST
Selection chart for CR, UR and relevant nominal case sizes (∅D × L in mm) for 114 series
Preferred types in bold.
CR
(µF)
UR (V)
10
16
25
40
63
100
1000
−
−
−
−
−
35 × 60
1500
−
−
−
−
−
35 × 60
2200
−
−
−
−
35 × 60
35 × 80
3300
−
−
−
35 × 60
35 × 60
35 × 105
4700
−
−
35 × 60
35 × 60
35 × 80
50 × 80
6800
−
−
35 × 60
35 × 80
35 × 105
50 × 105
10000
−
35 × 60
35 × 80
35 × 105
50 × 80
65 × 105
15000
35 × 60
35 × 80
35 × 105
50 × 80
50 × 105
65 × 105
22000
35 × 80
35 × 105
50 × 80
50 × 105
65 × 105
75 × 105
33000
35 × 105
50 × 80
50 × 105
65 × 105
65 × 105
−
47000
50 × 80
50 × 105
65 × 105
65 × 105
75 × 105
−
68000
50 × 105
65 × 105
65 × 105
75 × 105
−
−
100000
65 × 105
65 × 105
75 × 105
−
−
−
150000
65 × 105
75 × 105
−
−
−
−
220000
75 × 105
−
−
−
−
−
Selection chart for CR, UR and relevant nominal case sizes (∅D × L in mm) for 115 series
Preferred types in bold.
CR
(µF)
UR (V)
250
350
385
400
150
−
−
35 × 60
35 × 60
220
−
35 × 60
35 × 80
35 × 80
330
35 × 60
35 × 80
35 × 105
35 × 105
470
35 × 80
35 × 105
50 × 80
50 × 80
35 × 105
50 × 80
50 × 105
50 × 105
1000
50 × 80
50 × 105
65 × 105
65 × 105
1500
50 × 105
65 × 105
65 × 105
65 × 105
2200
65 × 105
65 × 105
75 × 105
75 × 105
3300
65 × 105
75 × 105
4700
75 × 105
680
1998 Mar 16
−
2
−
−
−
−
Philips Components
Product specification
Aluminium electrolytic capacitors
Power Eurodin Screw Terminals
114/115 PED-ST
MECHANICAL DATA AND PACKAGING QUANTITIES
A
5.3
L
handbook, full pagewidth
0.7
11
0.2
D
P
d2
M5
d1
MGB303 - 2
9
0.5
Dimensions in mm.
For dimensions see Table 1.
Maximum permissible torque which may be applied to the termination screws: 2 Nm.
For accessories refer to this handbook, Section “Mounting Accessories”.
The capacitors are delivered with screws and washers.
Fig.2 Screw terminal (ST); screw terminal bolt (STB).
Table 1
Physical dimensions, mass and packaging information; see Fig.2
NOMINAL
CASE SIZE
∅D × L
(mm)
d2 × l
MASS
(g)
PACKAGING
QUANTITIES
(per box)
CARDBOARD BOX
DIMENSIONS
l×w×h
(mm)
8.0
M8 × 12
≈55
25
196 × 192 × 110
8.4
8.0
M8 × 12
≈80
25
196 × 192 × 115
13.0
8.4
8.0
M8 × 12
≈110
25
196 × 192 × 140
22.0
14.3
8.0
M12 × 16
≈160
25
293 × 273 × 115
108
22.0
14.3
8.0
M12 × 16
≈210
25
293 × 273 × 140
66.5
108
28.5
19.0
9.6
M12 × 16
≈370
10
368 × 151 × 140
76.5
108
32.0
21.0
9.6
M12 × 16
≈535
10
418 × 173 × 140
∅Dmax
(mm)
Lmax
(mm)
P
±0.1
(mm)
A
(mm)
d1
±0.2
(mm)
35 × 60
36.5
63
13.0
8.4
35 × 80
36.5
83
13.0
35 × 105
36.5
108
50 × 80
51.5
83
50 × 105
51.5
65 × 105
75 × 105
MARKING
The capacitors are marked (where possible) with the following information:
• Rated capacitance (in µF)
• Tolerance code on rated capacitance (M for ±20%)
• Rated voltage (in V)
• Climatic category in accordance with “IEC 68”
• Date code (year and week) in accordance with “IEC 62”
• Code for factory of origin
• Name of manufacturer
• Code number (last 8 digits)
• Code for basic specification in accordance with “IEC 384-4-1” and “CECC 30301”.
1998 Mar 16
3
Nominal case size: ∅35 × 80 mm; ST version
rated capacitance at 100 Hz, tolerance −10 to +30%
IR
rated RMS ripple current at 100 Hz, 85 °C and 20 kHz, 70 °C
IL1
max. leakage current after 1 minute at UR
IL5
max. leakage current after 5 minutes at UR
ESR
typical equivalent series resistance at 100 Hz
Z
impedance at 20 kHz
Tan δ
max. dissipation factor at 100 Hz
UR
(V)
4
10
16
10000 µF/25 V; −10/+30%
DESCRIPTION
CR
Table 2
Electrolytic capacitor 114 series
Catalogue number: 2222 114 16103.
Electrical data and ordering information for the 114 series; preferred types in bold
CR
100 Hz
(µF)
NOMINAL
CASE SIZE
∅D × L
(mm)
IR
100 Hz
85 °C
(A)
IR
20 kHz
70 °C
(A)
IL1
1 min
(mA)
IL5
5 min
(mA)
ESR
TYP.
100 Hz
(mΩ)
Tan δ
MAX.
100 Hz
Z
TYP.
20 kHz
(mΩ)
13
Z
MAX.
20 kHz
(mΩ)
CATALOGUE
NUMBER
(see Table 3, note 1)
2222 ... .....
15000
35 × 60
6
11.4
0.90
0.30
20
0.32
20
114 14153
22000
35 × 80
7.5
14.2
1.32
0.43
14
0.33
9.5
14
114 14223
33000
35 × 105
10
19
1.98
0.66
10
0.35
7.5
10
114 14333
47000
50 × 80
14
26.5
2.82
0.94
7.5
0.36
5.0
9.5
114 14473
68000
50 × 105
18
34
4.08
1.36
5.5
0.38
4.0
8.0
114 14683
100000
65 × 105
30
50
6.00
2.00
3.5
0.34
3.0
5.0
114 14104
150000
65 × 105
30
50
9.00
3.00
3.0
0.45
3.0
5.0
114 14154
220000
75 × 105
37
50
13.20
4.40
2.0
0.45
2.5
4.0
114 14224
10000
35 × 60
6
11.4
0.96
0.32
22
0.22
15000
35 × 80
7.5
14.2
1.44
0.40
15
0.23
9.5
14
114 15153
22000
35 × 105
10
19
2.12
0.71
11
0.25
7.0
10
114 15223
33000
50 × 80
13
24.6
3.17
1.06
7.5
0.26
5.0
9.5
114 15333
13
20
Philips Components
SYMBOL
Ordering example
Aluminium electrolytic capacitors
Power Eurodin Screw Terminals
1998 Mar 16
ELECTRICAL DATA AND ORDERING INFORMATION
Unless otherwise specified, all electrical values in Tables 2 and 3 apply at Tamb = 20 °C,
P = 86 to 106 kPa, RH = 45 to 75%.
114 15103
18
34
4.52
1.51
5.5
0.27
4.0
8.0
114 15473
28
50
6.53
2.18
3.5
0.24
3.0
5.0
114 15683
100000
65 × 105
28
50
9.60
3.20
3.0
0.31
3.0
5.0
114 15104
150000
75 × 105
37
50
14.40
4.80
2.0
0.31
2.5
4.0
114 15154
Product specification
50 × 105
65 × 105
114/115 PED-ST
47000
68000
25
4700
35 × 60
5.2
40
5
63
IR
20 kHz
70 °C
(A)
IL1
1 min
(mA)
IL5
5 min
(mA)
10
0.71
0.24
ESR
TYP.
100 Hz
(mΩ)
Tan δ
MAX.
100 Hz
Z
TYP.
20 kHz
(mΩ)
Z
MAX.
20 kHz
(mΩ)
CATALOGUE
NUMBER
(see Table 3, note 1)
2222 ... .....
30
0.14
15
23
114 16472
6800
35 × 60
5.2
10
1.02
0.34
25
0.18
14
21
114 16682
10000
35 × 80
6.7
12.7
1.50
0.50
18
0.18
10
15
114 16103
15000
35 × 105
9.7
18.4
2.25
0.75
12
0.19
7.5
11
114 16153
22000
50 × 80
12.5
23.7
3.30
1.10
8.5
0.19
5.5
9.5
114 16223
33000
50 × 105
18
34
4.95
1.65
6.0
0.21
4.0
8.0
114 16333
47000
65 × 105
27
50
7.05
2.35
4.0
0.18
3.0
5.0
114 16473
68000
65 × 105
27
50
10.20
3.40
3.5
0.23
3.0
5.0
114 16683
100000
75 × 105
37
50
15.00
5.0
2.5
0.23
2.5
4.0
114 16104
8.5
0.80
0.27
37
0.13
21
32
114 17332
3300
35 × 60
4.5
4700
35 × 60
4.5
8.5
1.13
0.38
35
0.17
22
33
114 17472
6800
35 × 80
6
11.4
1.64
0.55
25
0.17
15
23
114 17682
10000
35 × 105
7.5
14.2
2.40
0.80
17
0.18
11
17
114 17103
15000
50 × 80
19
3.60
1.20
11
0.17
7.5
13
114 17153
10
22000
50 × 105
15
28.5
5.28
1.76
8.0
0.18
5.5
10.5
114 17223
33000
65 × 105
21
40
7.92
2.64
5.0
0.16
3.5
6.0
114 17333
47000
65 × 105
22
42
11.28
3.76
4.5
0.21
3.5
6.0
114 17473
68000
75 × 105
30
50
16.32
5.44
2200
35 × 60
3.7
7
0.84
0.28
39
0.09
22
33
114 18222
3300
35 × 60
3.7
7
1.25
0.42
32
0.11
20
30
114 18332
4700
35 × 80
5.2
10
1.78
0.66
23
0.11
14
21
114 18472
6800
35 × 105
7.5
14.2
2.57
0.86
17
0.11
10
15
114 18682
10000
50 × 80
9.5
18
3.78
1.26
12
0.12
7.5
14
114 18103
15000
50 × 105
13.5
25.6
5.67
1.89
8.5
0.13
5.5
10.5
114 18153
22000
65 × 105
21
40
8.32
2.77
5.0
0.11
3.5
6.0
114 18223
33000
65 × 105
22
42
12.48
4.16
4.5
0.14
3.5
6.0
114 18333
47000
75 × 105
30
50
17.77
5.92
3.0
0.14
3.0
4.5
114 18473
3.0
0.21
3.0
4.5
Philips Components
IR
100 Hz
85 °C
(A)
CR
100 Hz
(µF)
Aluminium electrolytic capacitors
Power Eurodin Screw Terminals
1998 Mar 16
NOMINAL
CASE SIZE
∅D × L
(mm)
UR
(V)
114 17683
Product specification
114/115 PED-ST
Z
TYP.
20 kHz
(mΩ)
Z
MAX.
20 kHz
(mΩ)
CATALOGUE
NUMBER
(see Table 3, note 1)
2222 ... .....
85
0.09
45
67
114 19102
0.30
65
0.10
40
60
114 19152
0.41
45
0.10
28
42
114 19222
1.98
0.66
30
0.10
19
28
114 19332
14.0
2.82
0.94
27
0.11
17
25
114 19472
18.8
4.08
1.36
19
0.11
12
18
114 19682
15.0
28.5
6.00
2.00
11
0.11
7
11
114 19103
65 × 105
15.8
30.0
9.00
3.00
10
0.12
6
10
114 19153
75 × 105
20.5
38.9
13.20
4.40
7
0.12
5
8
114 19223
Tan δ
MAX.
100 Hz
Z
TYP.
20 kHz
(mΩ)
Z
MAX.
20 kHz
(mΩ)
CATALOGUE
NUMBER
(see note 1)
2222 ... .....
1000
35 × 60
3.0
1500
35 × 60
2200
35 × 80
3300
Table 3
6
Tan δ
MAX.
100 Hz
100
IR
20 kHz
70 °C
(A)
IL1
1 min
(mA)
IL5
5 min
(mA)
5.7
0.60
0.20
3.3
6.3
0.90
4.6
8.7
1.32
35 × 105
6.5
12.3
4700
50 × 80
7.4
6800
50 × 105
9.9
10000
65 × 105
15000
22000
ESR
TYP.
100 Hz
(mΩ)
Electrical data and ordering information for the 115 series; preferred types in bold
NOMINAL
CASE SIZE
∅D × L
(mm)
IR
100 Hz
85 °C
(A)
IR
20 kHz
70 °C
(A)
IL5
5 min
(mA)
250
330
35 × 60
1.8
3.4
0.50
0.17
300
0.15
275
500
115 13331
470
35 × 80
2.5
4.7
0.71
0.24
250
0.15
140
375
115 13471
680
35 × 105
3.5
6.6
1.02
0.34
180
0.15
125
300
115 13681
1000
50 × 80
4.2
8
1.50
0.50
110
0.15
60
130
115 13102
1500
50 × 105
6.3
12
2.25
0.75
60
0.15
40
100
115 13152
2200
65 × 105
8.8
16.7
3.30
1.10
45
0.15
30
60
115 13222
3300
65 × 105
10.5
20
4.95
1.65
30
0.15
25
50
115 13332
4700
75 × 105
14
7.05
2.35
25
0.15
20
40
115 13472
35 × 60
1.9
3.6
0.47
0.16
360
0.10
220
480
115 15221
330
35 × 80
2.5
4.8
0.70
0.23
245
0.10
150
320
115 15331
470
35 × 105
3.2
6.1
0.99
0.33
175
0.10
105
230
115 15471
680
50 × 80
3.9
7.0
1.47
0.48
140
0.10
60
130
115 15681
50 × 105
5.4
9.7
2.14
0.71
65
0.10
50
100
115 15102
1000
Product specification
26.5
220
114/115 PED-ST
CR
100 Hz
(µF)
350
IL1
1 min
(mA)
ESR
TYP.
100 Hz
(mΩ)
UR
(V)
Philips Components
IR
100 Hz
85 °C
(A)
CR
100 Hz
(µF)
Aluminium electrolytic capacitors
Power Eurodin Screw Terminals
1998 Mar 16
NOMINAL
CASE SIZE
∅D × L
(mm)
UR
(V)
385
400
NOMINAL
CASE SIZE
∅D × L
(mm)
IR
100 Hz
85 °C
(A)
1500
65 × 105
2200
65 × 105
9.1
17.5
4.62
1.54
35
0.10
3300
75 × 105
10.8
19.4
6.93
2.31
30
0.12
150
35 × 60
1.0
1.8
0.34
0.12
730
0.12
7.7
IR
20 kHz
70 °C
(A)
IL1
1 min
(mA)
IL5
5 min
(mA)
14.8
3.15
1.05
ESR
TYP.
100 Hz
(mΩ)
55
Tan δ
MAX.
100 Hz
Z
TYP.
20 kHz
(mΩ)
Z
MAX.
20 kHz
(mΩ)
CATALOGUE
NUMBER
(see note 1)
2222 ... .....
0.10
30
70
115 15152
22
50
115 15222
20
45
115 15332
450
935
115 18151
220
35 × 80
1.4
2.6
0.50
0.17
520
0.12
310
630
115 18221
330
35 × 105
1.9
3.6
0.75
0.25
340
0.12
210
425
115 18331
470
50 × 80
2.7
5.1
1.06
0.36
200
0.12
140
300
115 18471
680
50 × 105
3.6
6.9
1.53
0.51
140
0.12
100
205
115 18681
1000
65 × 105
5.1
9.7
2.25
0.75
95
0.12
65
125
115 18102
1500
65 × 105
5.7
10.6
3.38
1.13
80
0.12
45
95
115 18152
7
2200
75 × 105
7.3
13.8
4.95
1.65
55
0.12
40
75
115 18222
150
35 × 60
1.0
1.8
0.36
0.12
730
0.12
450
935
115 16151
220
35 × 80
1.4
2.6
0.53
0.18
520
0.12
310
630
115 16221
330
35 × 105
1.9
3.6
0.79
0.26
340
0.12
210
425
115 16331
470
50 × 80
2.7
5.1
1.13
0.38
200
0.12
140
300
115 16471
680
50 × 105
3.6
6.9
1.63
0.54
140
0.12
100
205
115 16681
1000
65 × 105
5.1
9.7
2.40
0.80
95
0.12
65
125
115 16102
1500
65 × 105
5.7
10.6
3.60
1.20
80
0.12
45
95
115 16152
2200
75 × 105
7.3
13.8
5.28
1.76
55
0.12
40
75
115 16222
Philips Components
350
CR
100 Hz
(µF)
Aluminium electrolytic capacitors
Power Eurodin Screw Terminals
1998 Mar 16
UR
(V)
Note
1. Catalogue number applies to the ST version; for STB version (not preferred) replace 8th digit by ‘5’ (2222 114/115 5....).
Product specification
114/115 PED-ST
Philips Components
Product specification
Aluminium electrolytic capacitors
Power Eurodin Screw Terminals
114/115 PED-ST
Additional electrical data
PARAMETER
CONDITIONS
VALUE
Voltage
Surge voltage for short periods
≤250 V versions
Us = 1.15 × UR
≥350 V versions
Us = 1.1 × UR
Urev ≤ 1 V
Reverse voltage
Current
Leakage current
after 1 minute at UR
IL1 ≤ 0.006CR × UR + 4 µA
after 5 minutes at UR
IL5 ≤ 0.002CR × UR + 4 µA
Inductance
Equivalent series inductance (ESL)
1998 Mar 16
case ∅D = 35 mm
typ. 13 nH
case ∅D = 50 mm
typ. 16 nH
case ∅D = 65 mm
typ. 19 nH
case ∅D = 75 mm
typ. 20 nH
8
Philips Components
Product specification
Aluminium electrolytic capacitors
Power Eurodin Screw Terminals
114/115 PED-ST
Equivalent series resistance (ESR)
MGB304
10 3
handbook, 4 columns
ESR
(mΩ )
10 2
1
2
3
4
5
10
Curve 1: case ∅D × L = 35 × 60 mm.
Curve 2: case ∅D × L = 35 × 80 mm.
Curve 3: case ∅D × L = 35 × 105 mm.
Curve 4: case ∅D × L = 50 × 80 mm.
Curve 5: case ∅D × L = 50 × 105 mm.
Curve 6: case ∅D × L = 65 × 105 mm; 100000 µF.
Curve 7: case ∅D × L = 65 × 105 mm; 150000 µF.
Curve 8: case ∅D × L = 75 × 105 mm.
ESR at 100 Hz and UR = 10 V.
6
7
8
1
50
0
50
T amb ( oC)
100
Fig.3 Typical ESR as a function of temperature.
MGB305
10 3
handbook, 4 columns
ESR
(mΩ )
10 2
Curve 1: case ∅D × L = 35 × 60 mm; 2200 µF.
Curve 2: case ∅D × L = 35 × 60 mm; 3300 µF.
Curve 3: case ∅D × L = 35 × 80 mm.
Curve 4: case ∅D × L = 35 × 105 mm.
Curve 5: case ∅D × L = 50 × 80 mm.
Curve 6: case ∅D × L = 50 × 105 mm.
Curve 7: case ∅D × L = 65 × 105 mm; 22000 µF.
Curve 8: case ∅D × L = 65 × 105 mm; 33000 µF.
Curve 9: case ∅D × L = 75 × 105 mm.
ESR at 100 Hz and UR = 63 V.
1
2
3
4
5
6
10
7
8
9
1
50
0
Fig.4 Typical ESR as a function of temperature.
1998 Mar 16
9
50
T amb ( oC)
100
Philips Components
Product specification
Aluminium electrolytic capacitors
Power Eurodin Screw Terminals
114/115 PED-ST
MGB306
10 4
handbook, 4 columns
ESR
(mΩ )
10
3
10 2
1
2
10
50
Curve 1: case ∅D × L = 50 × 80 mm.
Curve 2: case ∅D × L = 50 × 105 mm.
ESR at 100 Hz and UR = 250 V.
0
50
T amb ( oC)
100
Fig.5 Typical ESR as a function of temperature.
MGB307
10 5
handbook, 4 columns
ESR
(mΩ )
10
4
10 3
1
2
10 2
Curve 1: case ∅D × L = 35 × 60 mm.
Curve 2: case ∅D × L = 35 × 80 mm.
Curve 3: case ∅D × L = 35 × 105 mm.
Curve 4: case ∅D × L = 50 × 80 mm.
Curve 5: case ∅D × L = 50 × 105 mm.
Curve 6: case ∅D × L = 65 × 105 mm; 1000 µF.
Curve 7: case ∅D × L = 65 × 105 mm; 1500 µF.
10
3
4
5
6
7
8
50
0
Curve 8: case ∅D × L = 75 × 105 mm.
ESR at 100 Hz and UR = 385 V.
Fig.6 Typical ESR as a function of temperature.
1998 Mar 16
10
50
T amb ( oC)
100
Philips Components
Product specification
Aluminium electrolytic capacitors
Power Eurodin Screw Terminals
114/115 PED-ST
Impedance (Z)
MGB308
10 3
handbook, 4 columns
Z
(mΩ )
1
2
10 2
3
4
5
6
7
10
Curve 1: case ∅D × L = 35 × 60 mm.
Curve 2: case ∅D × L = 35 × 80 mm.
Curve 3: case ∅D × L = 35 × 105 mm.
Curve 4: case ∅D × L = 50 × 80 mm.
Curve 5: case ∅D × L = 50 × 105 mm.
Curve 6: case ∅D × L = 65 × 105 mm.
Curve 7: case ∅D × L = 75 × 105 mm.
Z at 20 kHz and UR = 10 V.
1
50
0
50
T amb ( oC)
100
Fig.7 Typical impedance as a function of temperature.
MGB309
10 3
handbook, 4 columns
1
2
Z
(mΩ )
3
4
10 2
5
6
7
8
10
Curve 1: case ∅D × L = 35 × 60 mm; 2200 µF.
Curve 2: case ∅D × L = 35 × 60 mm; 3300 µF.
Curve 3: case ∅D × L = 35 × 80 mm.
Curve 4: case ∅D × L = 35 × 105 mm.
Curve 5: case ∅D × L = 50 × 80 mm.
Curve 6: case ∅D × L = 50 × 105 mm.
Curve 7: case ∅D × L = 65 × 105 mm.
Curve 8: case ∅D × L = 75 × 105 mm.
Z at 20 kHz and UR = 63 V.
1
50
0
50
Fig.8 Typical impedance as a function of temperature.
1998 Mar 16
11
T amb ( oC)
100
Philips Components
Product specification
Aluminium electrolytic capacitors
Power Eurodin Screw Terminals
10 4
handbook, 4 columns
Z
(mΩ )
10 3
114/115 PED-ST
MGB310
1
2
3
4
5
6
7
8
10 2
Curve 1: case ∅D × L = 35 × 60 mm.
Curve 2: case ∅D × L = 35 × 80 mm.
Curve 3: case ∅D × L = 35 × 105 mm.
Curve 4: case ∅D × L = 50 × 80 mm.
Curve 5: case ∅D × L = 50 × 105 mm.
Curve 6: case ∅D × L = 65 × 105 mm; 2200 µF.
Curve 7: case ∅D × L = 65 × 105 mm; 3300 µF.
Curve 8: case ∅D × L = 75 × 105 mm.
Z at 20 kHz and UR = 250 V.
10
1
50
0
50
T amb ( oC)
100
Fig.9 Typical impedance as a function of temperature.
MGB311
10 4
handbook, 4 columns 1
2
Z
(mΩ )
3
4
5
6
7
8
10 3
10 2
Curve 1: case ∅D × L = 35 × 60 mm.
Curve 2: case ∅D × L = 35 × 80 mm.
10
Curve 3: case ∅D × L = 35 × 105 mm.
Curve 4: case ∅D × L = 50 × 80 mm.
Curve 5: case ∅D × L = 50 × 105 mm.
Curve 6: case ∅D × L = 65 × 105 mm; 1000 µF.
Curve 7: case ∅D × L = 65 × 105 mm; 1500 µF.
Curve 8: case ∅D × L = 75 × 105 mm.
Z at 20 kHz and UR = 385 V.
1
50
0
50
Fig.10 Typical impedance as a function of temperature.
1998 Mar 16
12
T amb ( oC)
100
Philips Components
Product specification
Aluminium electrolytic capacitors
Power Eurodin Screw Terminals
114/115 PED-ST
MGB312
10
handbook, 4 columns
Z
(Ω )
1
1
2
10 1
10 2
Curve 1: 2200 µF, 63 V.
Curve 2: 15000 µF, 10 V.
Case ∅D × L = 35 × 60 mm.
Tamb = 20 °C.
10 3
10
102
103
104
105
106 f (Hz) 10 7
Fig.11 Typical impedance as a function of frequency.
MGB313
10
handbook, 4 columns
Z
(Ω )
1
1
2
10 1
10 2
Curve 1: 4700 µF, 63 V.
Curve 2: 22000 µF, 10 V.
Case ∅D × L = 35 × 80 mm.
Tamb = 20 °C.
10 3
10
10
2
10
3
10
4
10
5
Fig.12 Typical impedance as a function of frequency.
1998 Mar 16
13
10
6
7
f (Hz) 10
Philips Components
Product specification
Aluminium electrolytic capacitors
Power Eurodin Screw Terminals
114/115 PED-ST
MGB314
10
handbook, 4 columns
Z
(Ω )
1
1
2
10 1
10 2
Curve 1: 6800 µF, 63 V.
Curve 2: 33000 µF, 10 V.
Case ∅D × L = 35 × 105 mm.
Tamb = 20 °C.
10 3
10
102
103
104
105
106 f (Hz) 10 7
Fig.13 Typical impedance as a function of frequency.
MGB315
10
handbook, 4 columns
Z
(Ω )
1
1
2
10 1
10 2
Curve 1: 10000 µF, 63 V.
Curve 2: 47000 µF, 10 V.
Case ∅D × L = 50 × 80 mm.
Tamb = 20 °C.
10
3
10
102
103
104
105
Fig.14 Typical impedance as a function of frequency.
1998 Mar 16
14
106 f (Hz) 10 7
Philips Components
Product specification
Aluminium electrolytic capacitors
Power Eurodin Screw Terminals
114/115 PED-ST
MGB316
10
handbook, 4 columns
Z
(Ω )
1
1
10 1
2
10 2
Curve 1: 15000 µF, 63 V.
Curve 2: 68000 µF, 10 V.
Case ∅D × L = 50 × 105 mm.
Tamb = 20 °C.
10 3
10
102
103
104
105
106 f (Hz) 10 7
Fig.15 Typical impedance as a function of frequency.
MGB317
10
handbook, 4 columns
Z
(Ω )
1
1
10 1
2
10 2
Curve 1: 22000 µF, 63 V.
Curve 2: 150000 µF, 10 V.
Case ∅D × L = 65 × 105 mm.
Tamb = 20 °C.
10 3
10
102
103
104
105
Fig.16 Typical impedance as a function of frequency.
1998 Mar 16
15
106 f (Hz) 10 7
Philips Components
Product specification
Aluminium electrolytic capacitors
Power Eurodin Screw Terminals
114/115 PED-ST
MGB318
10
handbook, 4 columns
Z
(Ω )
1
1
10 1
2
10 2
Curve 1: 47000 µF, 63 V.
Curve 2: 220000 µF, 10 V.
Case ∅D × L = 75 × 105 mm.
Tamb = 20 °C.
10 3
10
102
103
104
105
106 f (Hz) 10 7
Fig.17 Typical impedance as a function of frequency.
10
handbook, 4 columns
MGB319
1
2
Z
(Ω )
1
10 1
10 2
Curve 1: 150 µF, 385 V.
Curve 2: 330 µF, 250 V.
Case ∅D × L = 35 × 60 mm.
Tamb = 20 °C.
10
3
10
102
103
104
105
Fig.18 Typical impedance as a function of frequency.
1998 Mar 16
16
106 f (Hz) 10 7
Philips Components
Product specification
Aluminium electrolytic capacitors
Power Eurodin Screw Terminals
114/115 PED-ST
MGB320
10
handbook, 4 columns
1
Z
(Ω )
2
1
10 1
10 2
Curve 1: 220 µF, 385 V.
Curve 2: 470 µF, 250 V.
Case ∅D × L = 35 × 80 mm.
Tamb = 20 °C.
10 3
10
102
103
104
105
106 f (Hz) 10 7
Fig.19 Typical impedance as a function of frequency.
MGB321
10
handbook, 4 columns
Z
(Ω )
1
2
1
10 1
10 2
Curve 1: 330 µF, 385 V.
Curve 2: 680 µF, 250 V.
Case ∅D × L = 35 × 105 mm.
Tamb = 20 °C.
10
3
10
102
103
104
105
Fig.20 Typical impedance as a function of frequency.
1998 Mar 16
17
106 f (Hz) 10 7
Philips Components
Product specification
Aluminium electrolytic capacitors
Power Eurodin Screw Terminals
114/115 PED-ST
MGB322
10
handbook, 4 columns
Z
(Ω )
1
2
3
1
10 1
10 2
Curve 1: 470 µF, 385 V.
Curve 2: 1000 µF, 250 V.
Curve 3: 680 µF, 350 V.
Case ∅D × L = 50 × 80 mm.
Tamb = 20 °C.
10 3
10
102
103
104
105
106 f (Hz) 10 7
Fig.21 Typical impedance as a function of frequency.
MGB323
10
handbook, 4 columns
Z
(Ω )
1
1
2
3
10 1
10 2
Curve 1: 680 µF, 385 V.
Curve 2: 1000 µF, 350 V.
Curve 3: 1500 µF, 250 V.
Case ∅D × L = 50 × 105 mm.
Tamb = 20 °C.
10
3
10
102
103
104
105
Fig.22 Typical impedance as a function of frequency.
1998 Mar 16
18
106 f (Hz) 10 7
Philips Components
Product specification
Aluminium electrolytic capacitors
Power Eurodin Screw Terminals
114/115 PED-ST
MBC449
4
10
handbook, 4 columns
Z
(mΩ )
1
2
3
4
10 3
10 2
10
Curve 1: 1000 µF, 385 V.
Curve 2: 1500 µF, 385 V.
Curve 3: 2200 µF, 250 V.
Curve 4: 3300 µF, 250 V.
Case ∅D × L = 65 × 105 mm.
Tamb = 20 °C.
1
1
10 2
10
10 3
10 4
10 5 f (Hz) 10 6
Fig.23 Typical impedance as a function of frequency.
MGB324
10
handbook, 4 columns
Z
(Ω )
1
1
2
10 1
10 2
Curve 1: 2200 µF, 385 V.
Curve 2: 4700 µF, 250 V
Case ∅D × L = 75 × 105 mm.
Tamb = 20 °C.
10 3
10
10
2
10
3
10
4
10
5
Fig.24 Typical impedance as a function of frequency.
1998 Mar 16
19
10
6
7
f (Hz) 10
Philips Components
Product specification
Aluminium electrolytic capacitors
Power Eurodin Screw Terminals
114/115 PED-ST
RIPPLE CURRENT AND USEFUL LIFE
Table 4
Multiplier of ripple current (IR) as a function of frequency
FREQUENCY
(Hz)
IR MULTIPLIER
50
0.83
100
1.00
200
1.10
400
1.15
1000
1.19
≥2000
1.20
MGA453
2.4
handbook, full pagewidth
2.3
IA
IR
2.2
2.1
2.0
1.9
1.8
1.7
1
life multiplier
2
1.
1.6
5
1.
2
1.5
5
2.
3
1.4
4
5
1.3
8
10
1.2
15
1.1
20
60
0.8
80
0.5
0.0
40
(1)
30
1.0
50
60
70
80
Tamb ( oC)
90
IA = actual ripple current at 100 Hz and 85 °C.
IR = rated ripple current at 100 Hz and 85 °C.
With an absolute maximum of 50 A at 85 °C
(1) Useful life at 85 °C and IR applied: 20000 hours (5000 hours for 400 V types).
Fig.25 Multiplier of useful life as a function of ambient temperature and ripple current load.
1998 Mar 16
20
Philips Components
Product specification
Aluminium electrolytic capacitors
Power Eurodin Screw Terminals
114/115 PED-ST
SPECIFIC TESTS AND REQUIREMENTS
General tests and requirements are specified in this handbook, Section “Tests and Requirements”.
Table 5
Test procedures and requirements
TEST
NAME OF TEST
Endurance
REFERENCE
IEC 384-4/
CECC 30300
subclause 4.13
PROCEDURE
(quick reference)
Tamb = 85 °C; UR applied;
8000 hours (400 V types: 2000 hours)
REQUIREMENTS
UR ≤ 100 V; ∆C/C: ±15%
UR > 100 V; ∆C/C: ±10%
Z ≤ 2 × spec. limit
IL5 ≤ spec. limit
Useful life
CECC 30301
subclause 1.8.1
Tamb = 85 °C; UR and IR applied;
20000 hours (400 V types: 5000 hours)
UR ≤ 100 V; ∆C/C: ±45%
UR > 100 V; ∆C/C: ±30%
Z ≤ 3 × spec. limit
IL5 ≤ spec. limit
no short or open circuit,
no visible damage
total failure percentage:
UR ≤ 100 V: ≤1%;
UR > 100 V: ≤3%
Shelf life
IEC 384-4/
(storage at
CECC 30300
high temperature) subclause 4.17
1998 Mar 16
Tamb = 85 °C; no voltage applied;
500 hours
after test: UR to be applied for 30 minutes,
24 to 48 hours before measurement
21
∆C/C: ±10%
IL5 ≤ 2 × spec. limit