Revised August 2001 74LCX32244 Low Voltage 32-Bit Buffer/Line Driver with 5V Tolerant Inputs and Outputs General Description Features The LCX32244 contains thirty-two non-inverting buffers with 3-STATE outputs designed to be employed as a memory and address driver, clock driver, or bus oriented transmitter/receiver. The device is nibble controlled. Each nibble has separate 3-STATE control inputs which can be shorted together for full 32-bit operation. ■ 5V tolerant inputs and outputs The LCX32244 is designed for low voltage (2.5V or 3.3V) VCC applications with capability of interfacing to a 5V signal environment. The LCX32244 is fabricated with an advanced CMOS technology to achieve high speed operation while maintaining CMOS low power dissipation. ■ 2.3V–3.6V VCC specifications provided ■ 4.5 ns tPD max (VCC = 3.0V), 20 µA ICC max ■ Power down high impedance inputs and outputs ■ Supports live insertion/withdrawal (Note 1) ■ ±24 mA output drive (VCC = 3.0V) ■ Uses patented noise/EMI reduction circuitry ■ Latch-up performance exceeds 500 mA ■ ESD performance: Human body model > 2000V Machine model > 200V ■ Packaged in plastic Fine-Pitch Ball Grid Array (FBGA) Note 1: To ensure the high-impedance state during power up or down OE should be tied to VCC through a pull-up resistor: the minimum value or the resistor is determined by the current-sourcing capability of the driver. Ordering Code: Order Number Package Number 74LCX32244GX (Note 2) BGA96A Package Description 96-Ball Fine-Pitch Ball Grid Array (FBGA), JEDEC MO-205, 5.5mm Wide [Tape and Reel] Note 2: BGA package available in Tape and Reel only. Logic Symbol © 2001 Fairchild Semiconductor Corporation DS500426 www.fairchildsemi.com 74LCX32244 Low Voltage 32-Bit Buffer/Line Driver with 5V Tolerant Inputs and Outputs April 2001 74LCX32244 Connection Diagram Pin Descriptions Pin Names Description OEn Output Enable Input (Active LOW) I0–I31 Inputs O0–O31 Outputs FBGA Pin Assignments 1 2 3 4 5 6 A O1 O0 OE1 OE2 I0 I1 B O3 O2 GND GND I2 I3 C O5 O4 VCC VCC I4 I5 D O7 O6 GND GND I6 I7 E O9 O8 GND GND I8 I9 F 011 O10 VCC VCC I10 I11 G O13 O12 GND GND I12 I13 H O14 O15 OE4 OE3 I15 I14 J O17 O16 OE5 OE6 I16 I17 K O19 018 GND GND I18 I19 Functional Description L O21 O20 VCC VCC I20 I21 The LCX32244 contains thirty-two non-inverting buffers with 3-STATE standard outputs. The device is nibble (4-bits) controlled with each nibble functioning identically, but independent of the other. The control pins can be shorted together to obtain full 32-bit operation. The 3-STATE outputs are controlled by an Output Enable (OEn) input for each nibble. When OEn is LOW, the outputs are in 2-state mode. When OEn is HIGH, the outputs are in the high impedance mode, but this does not interfere with entering new data into the inputs. M O23 O22 GND GND I22 I23 N O25 O24 GND GND I24 I25 P O27 O26 VCC VCC I26 I27 R O29 O28 GND GND I28 I29 T O30 O31 OE8 OE7 I31 I30 (Top Thru View) Truth Table Inputs Outputs OEn In L L L L H H H X Z H = HIGH Voltage Level L = LOW Voltage Level X = Immaterial (HIGH or LOW, inputs may not float) Z = High Impedance Logic Diagrams www.fairchildsemi.com 2 On Symbol Parameter Value VCC Supply Voltage −0.5 to +7.0 VI DC Input Voltage −0.5 to +7.0 VO DC Output Voltage −0.5 to +7.0 Conditions Units V V Output in 3-STATE −0.5 to VCC + 0.5 Output in HIGH or LOW State (Note 4) IIK DC Input Diode Current −50 VI < GND IOK DC Output Diode Current −50 VO < GND +50 VO > VCC V mA mA IO DC Output Source/Sink Current ±50 mA ICC DC Supply Current per Supply Pin ±100 mA IGND DC Ground Current per Ground Pin ±100 mA TSTG Storage Temperature −65 to +150 °C Recommended Operating Conditions (Note 5) Symbol VCC Parameter Supply Voltage VI Input Voltage VO Output Voltage IOH/IOL Output Current TA Free-Air Operating Temperature ∆t/∆V Input Edge Rate, VIN = 0.8V–2.0V, VCC = 3.0V Min Max Operating 2.0 3.6 Data Retention 1.5 3.6 0 5.5 HIGH or LOW State 0 VCC 3-STATE 0 5.5 VCC = 3.0V − 3.6V ±24 VCC = 2.7V − 3.0V ±12 VCC = 2.3V − 2.7V ±8 Units V V V mA −40 85 °C 0 10 ns/V Note 3: The Absolute Maximum Ratings are those values beyond which the safety of the device cannot be guaranteed. The device should not be operated at these limits. The parametric values defined in the Electrical Characteristics tables are not guaranteed at the Absolute Maximum Ratings. The “Recommended Operating Conditions” table will define the conditions for actual device operation. Note 4: IO Absolute Maximum Rating must be observed. Note 5: Unused inputs must be held HIGH or LOW. They may not float. DC Electrical Characteristics Symbol VIH VIL VOH VOL Parameter Conditions HIGH Level Input Voltage LOW Level Input Voltage HIGH Level Output Voltage LOW Level Output Voltage IOH = −100 µA VCC (V) TA = −40°C to +85°C Min 2.3 − 2.7 1.7 2.7 − 3.6 2.0 Max V 2.3 − 2.7 0.7 2.7 − 3.6 0.8 2.3 − 3.6 Units V VCC − 0.2 IOH = −8 mA 2.3 1.8 IOH = −12 mA 2.7 2.2 IOH = −18 mA 3.0 2.4 IOH = −24 mA 3.0 2.2 IOL = 100 µA 2.3 − 3.6 0.2 IOL = 8 mA 2.3 0.6 IOL = 12 mA 2.7 0.4 IOL = 16 mA 3.0 0.4 V V IOL = 24 mA 3.0 0.55 II Input Leakage Current 0 ≤ VI ≤ 5.5V 2.3 − 3.6 ±5.0 µA IOZ 3-STATE Output Leakage 0 ≤ VO ≤ 5.5V 2.3 − 3.6 ±5.0 µA 0 10 µA VI = V IH or VIL IOFF Power-Off Leakage Current VI or VO = 5.5V 3 www.fairchildsemi.com 74LCX32244 Absolute Maximum Ratings(Note 3) 74LCX32244 DC Electrical Characteristics Symbol (Continued) Parameter VCC Conditions TA = −40°C to +85°C (V) ICC ∆ICC Quiescent Supply Current Increase in ICC per Input Min Units Max VI = VCC or GND 2.3 − 3.6 20 3.6V ≤ VI, VO ≤ 5.5V (Note 6) 2.3 − 3.6 ±20 VIH = VCC −0.6V 2.3 − 3.6 500 µA µA Note 6: Outputs disabled or 3-STATE only. AC Electrical Characteristics TA = −40°C to +85°C, RL = 500 Ω Symbol Parameter VCC = 3.3V ± 0.3V VCC = 2.7V VCC = 2.5V ± 0.2V CL = 50 pF CL = 50 pF CL = 30 pF Min Max Min Max Min Max tPHL Propagation Delay 1.0 4.5 1.0 5.2 1.0 5.4 tPLH Data to Output 1.0 4.5 1.0 5.2 1.0 5.4 tPZL Output Enable Time 1.0 5.5 1.0 6.3 1.0 7.2 1.0 5.5 1.0 6.3 1.0 7.2 1.0 5.4 1.0 5.7 1.0 6.5 1.0 5.4 1.0 5.7 1.0 6.5 VCC TA = 25°C (V) Typical CL = 50 pF, VIH = 3.3V, VIL = 0V 3.3 0.8 CL = 30 pF, VIH = 2.5V, VIL = 0V 2.5 0.6 CL = 50 pF, VIH = 3.3V, VIL = 0V 3.3 −0.8 CL = 30 pF, VIH = 2.5V, VIL = 0V 2.5 −0.6 tPZH tPLZ Output Disable Time tPHZ Units ns ns ns Dynamic Switching Characteristics Symbol Parameter VOLP Quiet Output Dynamic Peak VOL VOLV Quiet Output Dynamic Valley VOL Conditions Units V V Capacitance Typical Units CIN Symbol Input Capacitance Parameter VCC = Open, VI = 0V or VCC 7 pF COUT Output Capacitance VCC = 3.3V, VI = 0V or VCC 8 pF CPD Power Dissipation Capacitance VCC = 3.3V, VI = 0V or VCC, f = 10 MHz 20 pF www.fairchildsemi.com Conditions 4 74LCX32244 AC LOADING and WAVEFORMS Generic for LCX Family FIGURE 1. AC Test Circuit (CL includes probe and jig capacitance) Test Switch tPLH, tPHL Open tPZL, tPLZ 6V at VCC = 3.3 ± 0.3V, and 2.7V VCC x 2 at VCC = 2.5 ± 0.2V tPZH, tPHZ GND Waveform for Inverting and Non-Inverting Functions 3-STATE Output High Enable and Disable Times for Logic Propagation Delay. Pulse Width and trec Waveforms Setup Time, Hold Time and Recovery Time for Logic trise and tfall 3-STATE Output Low Enable and Disable Times for Logic FIGURE 2. Waveforms (Input Characteristics; f =1MHz, tr = tf = 3ns) Symbol VCC 3.3V ± 0.3V 2.7V 2.5V ± 0.2V Vmi 1.5V 1.5V VCC/2 Vmo 1.5V 1.5V VCC/2 Vx VOL + 0.3V VOL + 0.3V VOL + 0.15V Vy VOH − 0.3V VOH − 0.3V VOH − 0.15V 5 www.fairchildsemi.com 74LCX32244 Schematic Diagram Generic for LCX Family www.fairchildsemi.com 6 74LCX32244 Low Voltage 32-Bit Buffer/Line Driver with 5V Tolerant Inputs and Outputs Physical Dimensions inches (millimeters) unless otherwise noted 96-Ball Fine-Pitch Ball Grid Array (FBGA), JEDEC MO-205, 5.5mm Wide Package Number BGA96A Fairchild does not assume any responsibility for use of any circuitry described, no circuit patent licenses are implied and Fairchild reserves the right at any time without notice to change said circuitry and specifications. LIFE SUPPORT POLICY FAIRCHILD’S PRODUCTS ARE NOT AUTHORIZED FOR USE AS CRITICAL COMPONENTS IN LIFE SUPPORT DEVICES OR SYSTEMS WITHOUT THE EXPRESS WRITTEN APPROVAL OF THE PRESIDENT OF FAIRCHILD SEMICONDUCTOR CORPORATION. As used herein: 2. A critical component in any component of a life support device or system whose failure to perform can be reasonably expected to cause the failure of the life support device or system, or to affect its safety or effectiveness. 1. Life support devices or systems are devices or systems which, (a) are intended for surgical implant into the body, or (b) support or sustain life, and (c) whose failure to perform when properly used in accordance with instructions for use provided in the labeling, can be reasonably expected to result in a significant injury to the user. www.fairchildsemi.com 7 www.fairchildsemi.com