D.C. direct drive motors Ø 42 mm For low-speed drive applications Maximum usable power: from 9 to 17 W ■ Ø 42 mm : Sintered bronze bearings lubricated for life Supply connection by 4.75 mm tags Replaceable brushes ■ ■ Types 82 800 0 82 800 0 82 800 0 12 V 24 V 48 V 82 800 036 82 800 037 82 800 038 rpm W A 2960 4.8 0.4 2750 4.3 0.18 2800 5.8 0.12 rpm mN.m W W A °C % 2000 75 15.7 30 2.5 44 52 2000 75 15.6 26.4 1.1 40 59 2000 72 15 28.8 0.6 45 52 F (155 °C) IP20 16.3 185 5.8 2 1.8 0.0342 0.89 18 12 105 400 8 3000 F (155 °C) IP20 17 210 2.7 7.7 6.9 0.0724 0.89 16 12 110 400 8 3000 F (155 °C) IP20 16.7 210 1.5 30 38 0.1419 1.26 17 12 115 400 8 3000 Applications Nominal voltage - Gas analysers - Pumps/vacuum devices - Cash registers - Printers - Mixers for automatic drink dispensers - Compressors - Spindle drives for engraving machines - Document sorters - Etc. Part numbers Standard characteristics Speed Absorbed power Absorbed current Characteristics - nominal Speed Torque Output power Absorbed power Absorbed current Gearbox case temperature rise Efficiency General characteristics Insulation class (conforming to IEC 85) 1 Made to order products, available on request - other supply voltages motor with 1 front ball bearing shaft lengths at front and/or rear specific interference suppression magnetic encoder 5 pulses per revolution - magnetic encoder with 2 directions of rotation (1 or 5 pulses per revolution) - other front fixing plates Degree of protection (IEC 529) Maximum usable power Start torque Start current Resistance Resistance : inductive Torque constant Electrical time constant Mechanical time constant Thermal time constant Inertia Weight No of segments Life Sintered bronze bearings Replaceable brushes W mN.m A Ω mH Nm/A ms ms min g.cm2 g hr ● ● ● ● ● ● Motors with encoder, non stocked Magnetic encoder 1 pulse per revolution (See the dimensions) A - Torque/Speed curves B - Torque/Current curves 82 800 039 82 800 040 82 800 041 82 800 0 B A rpm 1/12 82 810 0 82 810 0 82 810 0 12 V 24 V 48 V 82 810 017 82 810 018 82 810 019 Dimensions : 82 800 0 - 82 810 0 2800 3.6 0.076 2000 45 9.4 20.4 1.7 45 46 2000 41.5 8.7 15.6 0.65 46 55.7 2000 39.4 8.2 18.2 0.38 45 45 F (155 °C) IP20 10.3 127 4 3.1 2.5 0.035 0.8 19 10 80 310 8 3000 F (155 °C) IP20 9.5 117 1.7 14.6 10.7 0.077 0.73 17 10 72 310 8 3000 F (155 °C) IP20 9 111 0.85 57.1 43.5 1.43 0.76 20 10 72 310 8 3000 120° 2 holes x Ø 2.75 ± 0.05 at 120° depth 5 mm on Ø 32 -0.01 -0.022 -0.01 0.5 Ø6 2780 4.3 0.18 ° 120 2850 4.8 0.4 Ø42 0° 12 2 M3 at 180° depth 5 mm on Ø 32 50.2 1 Ø22 -0.05 L max. 19.8 11.5 6.9 2.5 14.3 25.6 max. 2 tags IEC 760 series 4.8 x 0.5 Dimensions with magnetic encoder (see p. 1/43 for connection) ● ● ● ● ● ● L1 max. Ø53 1 82 810 024 82 810 025 82 810 026 Type 82 800 0 82 810 0 82 810 0 A B rpm To order, specify : Standard products 1 Part number Example : D.C. direct drive motor - 82 800 036 Standard products, non stocked 1 Part number Example : D.C. direct drive motor - 82 800 039 1/13 L max. (mm) 84.8 69.8 L1 max. (mm) 99.1 84.1 -0.01 Ø6f7 -0.022 -0.01 Ø22 -0.05 Ø42 2.5 25.6 max. 1