ETC BVA01/Z0000/11

Polysnap® Power Inlet Modules
IEC Fused Inlet - Polyflange
r Screw Fixing to Panel
r Vertical Module
Arrangement
r Snap-in Components
r Inlet Variations (with
various tag sizes)
r Double Pole Switch
Variations
BVA01/Z0000/10
r Filtered Inlet Option
r Options of O/I marked
switches
r Fused
r Screw Fixing to Panel
Polysnap®
r Vertical Module
Arrangement
r Snap-in Components
r Inlet Variations (with
various tag sizes)
r Double Pole Switch
Variations
BVB01/Z0000/11
r Filtered Inlet Option
r Options of O/I marked
switches
r Fused
How to Order
BV x xx / xxxxx / xx
Flange Type
Type of Inlet / Outlet
Filtered or Non Filtered Inlet
Combination of Other Components
A = Top fixing
Fused Power Inlet (cold
condition), 6.3 or 2.8mm tabs:
Z0000 = Non Filtered
Neon Indicator:
Axxxx = Standard
03 = Red Neon Indicator
Bxxxx = Medical
Double Pole Switch:
Cxxxx = High Performance Standard
(Single Fuse Version only)
10 = D.P. Switch
B = Side fixing
01 = PF0011/63
02 = PF0011/28
Twin Fused Power Inlet (cold
condition), 6.3 or 2.8mm tabs:
Double Pole Neon Switch:
11 = D.P. Red Neon Switch
12 = D.P. Green Neon Switch
15 = PF0033/63
16 = PF0033/28
Double Pole High Inrush Switch:
13 = D.P. High Inrush Switch
For Filtered inlet use 6th to 9th
Double Pole Switch Marked O/I:
characters from filter ordering code see
pages 71-74.
70 = D.P. Switch (O/I)
Double Pole Neon Switch Marked (O/I):
E.g. BVA01/A0620/10
76 = D.P. Red Neon Switch (O/I)
77 = D.P. Green Neon Switch (O/I)
Double Pole High Inrush Switch Marked
(O/I):
78 = D.P. High Inrush Switch (O/I)
Note: For technical details of individual components please see page 54
70
Fax: +44 (0) 20 8507 2691
Email: [email protected]