MICROCIRCUIT DATA SHEET Original Creation Date: 10/10/95 Last Update Date: 05/14/98 Last Major Revision Date: 03/04/98 MNCD4029BM-X REV 1A0 PRESETTABLE BINARY/DECADE UP/DOWN COUNTER General Description The CD4029BM is a presettable up/down counter which counts in either binary or decade mode depending on the voltage level applied at binary/decade input. When binary/decade is at logical "1", the counter counts in binary, otherwise it counts in decade. Similarly, the counter counts up when the up/down input is at logical "1" and vice versa. A Logical "1" preset enable signal allows information at the "jam" inputs to preset the counter to any state asynchronously with the clock. The counter is advanced one count at the positive-going edge of the clock if the carry in and preset enable inputs are at logical "0". Advancement is inhibited when either or both of these two inputs is at logical "1". The carry out signal is normally at logical "1" state and goes to logical "0" state when the counter reaches its maximum count in the "up" mode or the minimum count in the "down" mode provided the carry input is at logical "0" state. All inputs are protected against static discharge by diode clamps to both Vdd and Vss. Industry Part Number NS Part Numbers CD4029BM CD4029BMJ/883* CD4029BMW/883 Prime Die CD4029BM Controlling Document 8101601EA* Processing Subgrp Description MIL-STD-883, Method 5004 1 2 3 4 5 6 7 8A 8B 9 10 11 Quality Conformance Inspection MIL-STD-883, Method 5005 1 Static tests at Static tests at Static tests at Dynamic tests at Dynamic tests at Dynamic tests at Functional tests at Functional tests at Functional tests at Switching tests at Switching tests at Switching tests at Temp ( oC) +25 +125 -55 +25 +125 -55 +25 +125 -55 +25 +125 -55 MICROCIRCUIT DATA SHEET MNCD4029BM-X REV 1A0 Features - Wide supply voltage range - High noise immunity - Low power TTL compatibility - Standard Military Drawing (SMD) - CD4029: 8101601EA* - Parallel jam inputs - Binary or BCD decade up/down counting 3V to 15V 0.45Vdd (typ.) Fan out of 2 driving 74L or 1 driving 74LS 2 MICROCIRCUIT DATA SHEET MNCD4029BM-X REV 1A0 (Absolute Maximum Ratings) (Note 1, 2) DC Supply Voltage (Vdd) -0.5V to +18Vdc Input Voltage (Vin) -0.5V to Vdd +0.5Vdc Storage Temperature Range (Ts) -65 C to +150 C Power Dissipation (Pd) Dual-In-Line Small Outline Lead Temperature (Tl) (Soldering, 10 seconds) Note 1: Note 2: 700mW 500mW 260 C "Absolute Maximum Ratings" are those values beyond which the safety of the device cannot be guaranteed. Except for "Operating Temperature Range" they are not meant to imply that the devices should be operated at these limits. The table of "Electrical Characteristics" provides conditions for actual device operation. Vss = 0V unless otherwise specified. Recommended Operating Conditions (Note 1) Supply Voltage (Vdd) 3V to 15Vdc Input Voltage (Vin) 0V to Vdd Vdc Operating Temperature Range (TA) CD4029BM Note 1: -55 C to +125 C Vss = 0V unless otherwise specified. 3 MICROCIRCUIT DATA SHEET MNCD4029BM-X REV 1A0 Electrical Characteristics DC PARAMETERS SYMBOL Vol Voh Iih Iil Icc PARAMETER Logical "0" Output Voltage Logical "1" Output Voltage Logical "1" Input Current Logical "0" Input Current Power Supply Current CONDITIONS NOTES PINNAME MIN SUBGROUPS 0.05 V 1, 2, 3 Vdd = 10V, Vih = 10V, Vil = 0V, Iout = 0uA 0.05 V 1, 2, 3 Vdd = 15V, Vih = 15V, Vil = 0V, Iout = 0uA 0.05 V 1, 2, 3 Vdd = 5V, Vih = 5V, Vil = 0V, Iout = 0uA 4.95 V 1, 2, 3 Vdd = 10V, Vih = 10V, Vil = 0V, Iout = 0uA 9.95 V 1, 2, 3 Vdd = 15V, Vih = 15V, Vil = 0V, Iout = 0uA 14.95 V 1, 2, 3 100 nA 1, 3 1000 nA 2 -100 nA 1, 3 -1000 nA 2 5 uA 1, 3 150 uA 2 10 uA 1, 3 300 uA 2 20 uA 1, 3 600 uA 2 -0.51 mA 1 -0.36 mA 2 -0.64 mA 3 -1.3 mA 1 -0.9 mA 2 -1.6 mA 3 -3.4 mA 1 -2.4 mA 2 -4.2 mA 3 Vdd = 15V, Vin = 15V Vdd = 15V, Vin = 0V Vdd = 5V, Vih = 5V, Vil = 0V Vdd = 15V, Vih = 15V, Vil = 0V Logical "1" Output Current UNIT Vdd = 5V, Vih = 5V, Vil = 0V, Iout = 0uA Vdd = 10V, Vih = 10V, Vil = 0V Ioh MAX Vdd = 5V, Vih = 5V, Vil = 0V, Vout = 4.6V Vdd = 10V, Vih = 10V, Vil = 0V, Vout = 9.5V Vdd = 15V, Vih = 15V, Vil = 0V, Vout = 13.5V 4 MICROCIRCUIT DATA SHEET MNCD4029BM-X REV 1A0 Electrical Characteristics DC PARAMETERS(Continued) SYMBOL Iol PARAMETER Logical "0" Output Current CONDITIONS NOTES Vdd = 5V, Vih = 5V, Vil = 0V, Vout = 0.4V Vdd = 10V, Vih = 10V, Vil = 0V, Vout = 0.5V Vdd = 15V, Vih = 15V, Vil = 0V, Vout = 1.5V Vih Vil Logical "1" Input Voltage Logical "0" Input Voltage PINNAME MIN MAX UNIT SUBGROUPS 0.51 mA 1 0.36 mA 2 0.64 mA 3 1.3 mA 1 0.9 mA 2 1.6 mA 3 3.4 mA 1 2.4 mA 2 4.2 mA 3 Vdd = 5V, Vout = 4.5V (min) 1 3.5 V 1, 2, 3 Vdd = 10V, Vout = 9V (min) 1 7 V 1, 2, 3 Vdd = 15V, Vout = 13.5V (min) 1 11 V 1, 2, 3 Vdd = 5V, Vout = .5V (max) 1 1.5 V 1, 2, 3 Vdd = 10V, Vout = 1V (max) 1 3 V 1, 2, 3 Vdd = 15V, Vout = 1.5V (max) 1 4 V 1, 2, 3 AC PARAMETERS: CLOCKED OPERATION (The following conditions apply to all the following parameters, unless otherwise specified.) AC: Cl = 50pF, trCL=trCH=20nS, Rl = 200K Ohms or equivalent impedance provided by diode load. tPLH Propagation Delay Time: To Q Output Vdd = 5V 400 nS 9 tPHL Propagation Delay Time: To Q Output Vdd = 5V 400 nS 9 tPLH Propagation Delay Time: To Carry Output Vdd = 5V 640 nS 9 tPHL Propagation Delay Time: To Carry Output Vdd = 5V 640 nS 9 5 MICROCIRCUIT DATA SHEET MNCD4029BM-X REV 1A0 Electrical Characteristics AC PARAMETERS: PRESET ENABLE OPERATION (The following conditions apply to all the following parameters, unless otherwise specified.) AC: Cl = 50pF, trCL=trCH=20nS, Rl = 200K Ohms or equivalent impedance provided by diode load. SYMBOL PARAMETER CONDITIONS NOTES PINNAME MIN MAX UNIT SUBGROUPS tPHL Propagation Delay Time: To Q Output Vdd = 5V 570 nS 9 tPLH Propagation Delay Time: To Carry Output Vdd = 5V 800 nS 9 AC PARAMETERS: CARRY INPUT OPERATION (The following conditions apply to all the following parameters, unless otherwise specified.) AC: Cl = 50pF, trCL=trCH=20nS, Rl = 200K Ohms or equivalent impedance provided by diode load. tPHL Propagation Delay Time: To Carry Output Vdd = 5V 530 nS 9 tPLH Propagation Delay Time: To Carry Output Vdd = 5V 530 nS 9 AC PARAMETERS: (The following conditions apply to all the following parameters, unless otherwise specified.) AC: Cl = 50pF, trCL=trCH=20nS, Rl = 200K Ohms or equivalent impedance provided by diode load. tTHL Transition Time: Q Outputs Vdd = 5V 200 nS 9 tTLH Transition Time: Q Outputs Vdd = 5V 200 nS 9 tTHL Transition Time: Carry Outputs Vdd = 5V 200 nS 9 tTLH Transition Time: Carry Outputs Vdd = 5V 200 nS 9 fCL Maximum Clock Vdd = 5V 1 1.5 MHz 9 tWH/tWL Minimum Clock Pulse Vdd = 5V 1 320 nS 9 tSU Minimum Set-Up Vdd = 5V 1 360 nS 9 tWH Minimum Enable Vdd = 5V 1 160 nS 9 tREM Minimum Preset Vdd = 5V 1 300 nS 9 Note 1: Parameter tested go-no-go only. 6 MICROCIRCUIT DATA SHEET MNCD4029BM-X REV 1A0 Revision History Rev ECN # 1A0 M0002793 05/14/98 Rel Date Originator Changes Linda Collins New update: MNCD4029BM-X rev. 1A0 Deleted the DC Drift values 7