NSC DM54LS151E

54LS151/DM54LS151/DM74LS151
Data Selector/Multiplexer
General Description
Features
This data selector/multiplexer contains full on-chip decoding to select the desired data source. The ’LS151 selects
one-of-eight data sources. The ’LS151 has a strobe input
which must be at a low logic level to enable these devices.
A high level at the strobe forces the W output high, and the
Y output low.
The ’LS151 features complementary W and Y outputs.
Y
Y
Y
Y
Y
Y
Y
Select one-of-eight data lines
Performs parallel-to-serial conversion
Permits multiplexing from N lines to one line
Also for use as Boolean function generator
Typical average propagation delay time data input to W
output 12.5 ns
Typical power dissipation 30 mW
Alternate Military/Aerospace device (54LS151) is available. Contact a National Semiconductor Sales Office/
Distributor for specifications.
Connection Diagram
Dual-In-Line Package
TL/F/6392 – 1
Order Number 54LS151DMQB, 54LS151FMQB, 54LS151LMQB,
DM54LS151J, DM54LS151W, DM74LS151M or DM74LS151N
See NS Package Number E20A, J16A, M16A, N16E or W16A
Truth Table
Inputs
Select
C
B
A
X
L
L
L
L
H
H
H
H
X
L
L
H
H
L
L
H
H
X
L
H
L
H
L
H
L
H
Outputs
Strobe
S
Y
W
H
L
L
L
L
L
L
L
L
L
D0
D1
D2
D3
D4
D5
D6
D7
H
D0
D1
D2
D3
D4
D5
D6
D7
H e High Level, L e Low Level, X e Don’t Care
D0, D1...D7 e the level of the respective D input
C1995 National Semiconductor Corporation
TL/F/6392
RRD-B30M105/Printed in U. S. A.
54LS151/DM54LS151/DM74LS151 Data Selector/Multiplexer
June 1989
Absolute Maximum Ratings (Note)
Note: The ‘‘Absolute Maximum Ratings’’ are those values
beyond which the safety of the device cannot be guaranteed. The device should not be operated at these limits. The
parametric values defined in the ‘‘Electrical Characteristics’’
table are not guaranteed at the absolute maximum ratings.
The ‘‘Recommended Operating Conditions’’ table will define
the conditions for actual device operation.
If Military/Aerospace specified devices are required,
please contact the National Semiconductor Sales
Office/Distributors for availability and specifications.
Supply Voltage
7V
Input Voltage
7V
Operating Free Air Temperature Range
b 55§ C to a 125§ C
DM54LS and 54LS
DM74LS
0§ C to a 70§ C
b 65§ C to a 150§ C
Storage Temperature Range
Recommended Operating Conditions
Symbol
DM54LS151
Parameter
VCC
Supply Voltage
VIH
High Level Input Voltage
VIL
Low Level Input Voltage
IOH
High Level Output Current
IOL
Low Level Output Current
TA
Free Air Operating Temperature
Electrical Characteristics
Symbol
DM74LS151
Units
Min
Nom
Max
Min
Nom
Max
4.5
5
5.5
4.75
5
5.25
V
0.7
0.8
V
b 0.4
b 0.4
mA
8
mA
70
§C
2
2
V
4
b 55
125
0
over recommended operating free air temperature range (unless otherwise noted)
Parameter
Conditions
Min
Typ
(Note 1)
Max
Units
b 1.5
V
VI
Input Clamp Voltage
VCC e Min, II e b18 mA
VOH
High Level Output
Voltage
VCC e Min, IOH e Max
VIL e Max, VIH e Min
Low Level Output
Voltage
VCC e Min, IOL e Max
VIL e Max, VIH e Min
DM54
0.25
0.4
DM74
0.35
0.5
IOL e 4 mA, VCC e Min
DM74
0.25
0.4
VOL
DM54
2.5
3.4
DM74
2.7
3.4
V
V
II
Input Current @ Max
Input Voltage
VCC e Max, VI e 7V
IIH
High Level Input Current
VCC e Max, VI e 2.7V
20
mA
IIL
Low Level Input Current
VCC e Max, VI e 0.4V
b 0.4
mA
IOS
Short Circuit
Output Current
VCC e Max
(Note 2)
Supply Current
VCC e Max (Note 3)
ICC
0.1
DM54
b 20
b 100
DM74
b 20
b 100
Note 1: All typicals are at VCC e 5V, TA e 25§ C.
Note 2: Not more than one output should be shorted at a time, and the duration should not exceed one second.
Note 3: ICC is measured with all outputs open, strobe and data select inputs at 4.5V, and all other inputs open.
2
6
10
mA
mA
mA
Switching Characteristics at VCC e 5V and TA e 25§ C (See Section 1 for Test Waveforms and Output Load)
Symbol
Parameter
RL e 2 kX
From (Input)
To (output)
CL e 15 pF
Min
Max
CL e 50 pF
Min
Units
Max
tPLH
Propagation Delay Time
Low to High Level Output
Select
(4 Levels) to Y
43
46
ns
tPHL
Propagation Delay Time
High to Low Level Output
Select
(4 Levels) to Y
30
36
ns
tPLH
Propagation Delay Time
Low to High Level Output
Select
(3 Levels) to W
23
25
ns
tPHL
Propagation Delay Time
High to Low Level Output
Select
(3 Levels) to W
32
40
ns
tPLH
Propagation Delay Time
Low to High Level Output
Strobe
to Y
42
44
ns
tPHL
Propagation Delay Time
High to Low Level Output
Strobe
to Y
32
40
ns
tPLH
Propagation Delay Time
Low to High Level Output
Strobe
to W
24
27
ns
tPHL
Propagation Delay Time
High to Low Level Output
Strobe
to W
30
36
ns
tPLH
Propagation Delay Time
Low to High Level Output
D0 thru D7
to Y
32
35
ns
tPHL
Propagation Delay Time
High to Low Level Output
D0 thru D7
to Y
26
33
ns
tPLH
Propagation Delay Time
Low to High Level Output
D0 thru D7
to W
21
25
ns
tPHL
Propagation Delay Time
High to Low Level Output
D0 thru D7
to W
20
27
ns
Logic Diagram
LS151
Address Buffers for 54LS151/74LS151
TL/F/6392 – 3
TL/F/6392 – 2
See Address Buffers to the Right
3
Physical Dimensions inches (millimeters)
Ceramic Leadless Chip Carrier Package (E)
Order Number 54LS151LMQB
NS Package Number E20A
Ceramic Dual-In-Line Package (J)
Order Number 54LS151DMQB or DM54LS151J
NS Package Number J16A
4
Physical Dimensions inches (millimeters) (Continued)
16-Lead Small Outline Molded Package (M)
Order Number DM74LS151M
NS Package Number M16A
16-Lead Molded Dual-In-Line Package (N)
Order Number DM74LS151N
NS Package Number N16E
5
54LS151/DM54LS151/DM74LS151 Data Selector/Multiplexer
Physical Dimensions inches (millimeters) (Continued)
16-Lead Ceramic Flat Package (W)
Order Number 54LS151FMQB or DM54LS151W
NS Package Number W16A
LIFE SUPPORT POLICY
NATIONAL’S PRODUCTS ARE NOT AUTHORIZED FOR USE AS CRITICAL COMPONENTS IN LIFE SUPPORT
DEVICES OR SYSTEMS WITHOUT THE EXPRESS WRITTEN APPROVAL OF THE PRESIDENT OF NATIONAL
SEMICONDUCTOR CORPORATION. As used herein:
1. Life support devices or systems are devices or
systems which, (a) are intended for surgical implant
into the body, or (b) support or sustain life, and whose
failure to perform, when properly used in accordance
with instructions for use provided in the labeling, can
be reasonably expected to result in a significant injury
to the user.
National Semiconductor
Corporation
1111 West Bardin Road
Arlington, TX 76017
Tel: 1(800) 272-9959
Fax: 1(800) 737-7018
2. A critical component is any component of a life
support device or system whose failure to perform can
be reasonably expected to cause the failure of the life
support device or system, or to affect its safety or
effectiveness.
National Semiconductor
Europe
Fax: (a49) 0-180-530 85 86
Email: cnjwge @ tevm2.nsc.com
Deutsch Tel: (a49) 0-180-530 85 85
English Tel: (a49) 0-180-532 78 32
Fran3ais Tel: (a49) 0-180-532 93 58
Italiano Tel: (a49) 0-180-534 16 80
National Semiconductor
Hong Kong Ltd.
13th Floor, Straight Block,
Ocean Centre, 5 Canton Rd.
Tsimshatsui, Kowloon
Hong Kong
Tel: (852) 2737-1600
Fax: (852) 2736-9960
National Semiconductor
Japan Ltd.
Tel: 81-043-299-2309
Fax: 81-043-299-2408
National does not assume any responsibility for use of any circuitry described, no circuit patent licenses are implied and National reserves the right at any time without notice to change said circuitry and specifications.