Z00607MA ® 0.8A TRIACS STANDARD MAIN FEATURES: A2 Symbol Value Unit IT(RMS) 0.8 A VDRM/VRRM 600 V IGT (Q1) 5 mA G A1 DESCRIPTION The Z00607MA is suitable for low power AC switching applications, such as fan speed, small light controllers... Thanks to low gate triggering current, it can be directly driven by microcontrollers. A1 G A2 TO-92 ABSOLUTE MAXIMUM RATINGS Symbol IT(RMS) ITSM ² It Parameter Value Unit TI = 50°C 0.8 A F = 50 Hz t = 20 ms 9 A F = 60 Hz t = 16.7 ms 9.5 RMS on-state current (full sine wave) Non repetitive surge peak on-state current (full cycle, Tj initial = 25°C) ² I t Value for fusing tp = 10 ms 0.45 A² s dI/dt Critical rate of rise of on-state current IG = 2 x IGT , tr ≤ 100 ns F = 120 Hz Tj = 110°C 20 A/µs IGM Peak gate current tp = 20 µs Tj = 110°C 1 A Tj = 110°C 0.1 W - 40 to + 150 - 40 to + 110 °C PG(AV) Tstg Tj Average gate power dissipation Storage junction temperature range Operating junction temperature range October 2001 - Ed: 4 1/5 Z00607MA ELECTRICAL CHARACTERISTICS (Tj = 25°C, unless otherwise specified) Symbol Test Conditions IGT (1) VD = 12 V Quadrant RL = 30 Ω VD = VDRM IH (2) IT = 200 mA IL IG = 1.2 IGT RL = 3.3 kΩ MAX. 5 7 mA ALL MAX. 1.3 V ALL MIN. 0.2 V MAX. 5 mA 10 mA Tj = 110°C I - III - IV MAX. II dV/dt (2) (dV/dt)c (2) Unit I - II - III IV VGT VGD Value 20 VD = 67 %VDRM gate open Tj = 110°C MIN. 10 V/µs (dI/dt)c = 0.35 A/ms MIN. 1.5 V/µs Tj = 110°C STATIC CHARACTERISTICS Symbol Test Conditions VTM (2) ITM = 1.1 A Vto (2) tp = 380 µs Value Unit Tj = 25°C MAX. 1.5 V Threshold voltage Tj = 110°C MAX. 0.95 V Rd (2) Dynamic resistance Tj = 110°C MAX. 420 mΩ IDRM VDRM = VRRM = 600 V Tj = 25°C 5 µA 0.1 mA IRRM MAX. Tj = 110°C Note 1: minimum IGT is guaranted at 5% of IGT max. Note 2: for both polarities of A2 referenced to A1 THERMAL RESISTANCES Symbol Parameter Rth(j-l) Junction to lead (AC) Rth(j-a) Junction to ambient Value Unit 60 °C/W 150 °C/W PRODUCT SELECTOR Part Number Z00607MA Voltage Sensitivity Type 600 V 5 mA Standard Package TO-92 ORDERING INFORMATION Z 006 07 M A Blank 1BA2 TRIAC SERIES VOLTAGE: M: 600V CURRENT: 0.8A SENSITIVITY: 07: 5mA 2/5 PACKAGE: A: TO-92 PACKING MODE: 1BA2: Bulk 2BL2: Ammopack Z00607MA OTHER INFORMATION Part Number Marking Weight Base quantity Packing mode Z00607MA 1BA2 Z00607MA 0.2 g 2500 Bulk Z00607MA 2BL2 Z00607MA 0.2 g 2500 Ammopack Fig. 1: Maximum power dissipation versus RMS on-state current (full cycle). Fig. 2: RMS on-state current versus ambient temperature (full cycle). P(W) 1.0 0.9 0.8 0.7 0.6 0.5 0.4 0.3 0.2 0.1 0.0 0.0 0.1 1.0 0.9 0.8 0.7 0.6 0.5 0.4 0.3 0.2 0.1 0.0 IT(RMS)(A) IT(RMS)(A) 0.2 0.3 0.4 0.5 0.6 0.7 0.8 Fig. 3: Relative variation of thermal impedance junction to ambient versus pulse duration. Rth(j-a)=Rth(j-l) Rth(j-a)=150°C/W Tamb(°C) 0 10 20 30 40 50 60 70 80 90 100 110 Fig. 4: Relative variation of gate trigger current, holding current and latching current versus junction temperature (typical values). IGT,IH,IL [Tj] / IGT,IH,IL [Tj=25°C] K=[Zth(j-a)/Rth(j-a)] 2.5 1.00 2.0 IGT 1.5 0.10 IH & IL 1.0 0.5 Tj(°C) tp(s) 0.01 1E-3 1E-2 1E-1 1E+0 1E+1 1E+2 5E+2 0.0 -40 -20 0 20 40 60 80 100 120 3/5 Z00607MA Fig. 5: Surge peak on-state current versus number of cycles. Fig. 6: Non-repetitive surge peak on-state current for a sinusoidal pulse with width tp < 10ms, and corresponding value of I²t. ITSM(A) 10 9 8 7 6 5 4 3 2 1 0 ITSM (A), I²t (A²s) 200.0 100.0 10.0 Repetitive Tamb=25°C 1.0 10 100 On-state I²t tp (ms) Number of cycles Fig. 7: values). ITSM One cycle Non repetitive Tj initial=25°C 1 Tj initial=25°C dI/dt limitation: 20A/µs t=20ms 1000 characteristics (maximum 0.1 0.01 0.10 1.00 10.00 Fig. 8: Relative variation of critical rate of decrease of main current versus (dV/dt)c (typical values). ITM(A) (dI/dt)c [(dV/dt)c] / Specified (dI/dt)c 10.0 10.0 8.0 6.0 Tj=Tj max. 1.0 4.0 Tj=25°C Tj max. Vto= 0.95 V Rd= 420 mΩ VTM(V) 0.1 0.0 0.5 1.0 1.5 2.0 2.5 3.0 3.5 4.0 4.5 5.0 Fig. 9: Relative variation of critical rate of decrease of main current versus junction temperature. (dI/dt)c [Tj] / (dI/dt)c [Tj specified] 6 5 4 3 2 1 0 Tj (°C) 0 4/5 10 20 30 40 50 60 70 80 90 100 110 2.0 (dV/dt)c (V/µs) 0.0 0.1 1.0 10.0 Z00607MA PACKAGE MECHANICAL DATA TO-92 (Plastic) DIMENSIONS REF. A Min. a B C F D E Millimeters A B C D E F a Typ. Max. Inches Min. 1.35 Typ. Max. 0.053 4.70 0.185 2.54 0.100 4.40 12.70 0.173 0.500 3.70 0.45 0.146 0.017 Information furnished is believed to be accurate and reliable. However, STMicroelectronics assumes no responsibility for the consequences of use of such information nor for any infringement of patents or other rights of third parties which may result from its use. No license is granted by implication or otherwise under any patent or patent rights of STMicroelectronics. Specifications mentioned in this publication are subject to change without notice. This publication supersedes and replaces all information previously supplied. STMicroelectronics products are not authorized for use as critical components in life support devices or systems without express written approval of STMicroelectronics. © The ST logo is a registered trademark of STMicroelectronics © 2001 STMicroelectronics - Printed in Italy - All Rights Reserved STMicroelectronics GROUP OF COMPANIES Australia - Brazil - China - Finland - France - Germany - Hong Kong - India - Italy - Japan - Malaysia Malta - Morocco - Singapore - Spain - Sweden - Switzerland - United Kingdom - U.S.A http://www.st.com 5/5