DIVISION OF DELTROL CORP. 100 SERIES RELAY 5 AND 10 AMP GENERAL PURPOSE 100U/101U FEATURES MODELS ■ Class F Coil Insulation System for 155°C Total Temperature ■ Coil Molded in DuPont Rynite® for Environmental Protection ■ Unique Armature Stop Maintains Adjustment 100: 100RF: 100U: 101U: 101UP: CONTACT DATA CONFIGURATION: Thru 3PDT MATERIALS: 5 AMP: 1/8" Diameter Moveable Fine Silver 3/16" Diameter Stationary Fine Silver 10 AMP: 3/16" Diameter Moveable Silver Cadmium Oxide 3/16" Diameter Stationary Fine Silver Gold Flash is Standard on All Contacts Gold Diffused Available on Special Order – Min. Qty. Req’d. CONTACT RATINGS MOVEABLE POLE CONTACT SIZE CONFIGURATION 1/8" Diameter 3/16" Diameter thru 3PDT thru 3PDT UL RATINGS* 1/8 HP or 5 amp at 120VAC 1/4 HP or 5 amp at 277VAC 5 amp at 28VDC 10 amp or 1/3 HP at 120VAC** 1/2 HP or 10 amp at 277VAC 10 amp at 28VDC **UL/CSA On 100U/101U Series Only **3 Pole Devices Rated at 6-2/3 Amp When Switching Greater Than 150VAC, Unless Polarity is the Same on All Poles UL RECOGNIZED FILE NO.: E37066 (100U/101U Only) CSA CERTIFIED FILE NO.: LR20690 (100U/101U Only) EXPECTED LIFE Electrical At Rated Load (Minimum) 100,000 Operations Mechanical Life 10,000,000 Operations DIELECTRIC STRENGTH 800 VRMS, 60 Hz Between Contacts 1500 VRMS (Model 100), 2200 VRMS (Model 100U/101U), 60 Hz Between Other Elements 6 5 & 10 Amp with Solder Lug Terminals With Diallyl Phthalate Panel For Switching RF 5 Amp Unit with UL and CSA Recognition 10 Amp Unit with UL and CSA Recognition 10 Amp Unit with Printed Circuit Terminals COIL DATA NOMINAL VOLTAGE AC Coils Single Pole Units AC Coils 2&3 Pole Units DC Coils 1-3 Pole Units 6VAC 12VAC 24VAC 48VAC 120VAC 240VAC 6VAC 12VAC 24VAC 48VAC 120VAC 240VAC 6VDC 12VDC 24VDC 48VDC 110VDC RESISTANCE IN OHMS ± 10% 5.0 20 80 315 2025 8000 4.5 18 72 285 1850 7200 30 120 480 1850 10,000 NOMINAL COIL POWER 2.0VA 2.2VA 1.2W Coil Voltages: AC: Up to 277 Volts/60 Hz DC: Up to 125 Volts Coil Treatment: Molded Rynite® Std. Class F Insulation Resistance: 100 Megohms Minimum UL Insulation System File No.: E74443 S155D 155°C Total Temperature Std. (Covers S105 Class A and S130D Class B Requirements) OPERATE DATA Pick Up (at 25°C): AC Volts 85% or Less of Nominal DC Volts 75% or Less of Nominal Operate Time: Approx. 15 Milliseconds Release Time: Approx. 15 Milliseconds ENVIRONMENTAL DATA Operating Ambient: AC: -45° to 70°C DC: -45° to 85°C Coil Temperature Rise: (25°C Ambient – Continuous Duty) AC: 45°C Approx. @ 60 Hz – Use at 50 Hz will Cause Slight Increase in Coil Rise DC: 25°C Approx. MECHANICAL DATA Terminals: 100/100U/101U Pierced Solder Lugs .125" x .032" 100UP/101UP Printed Circuit Pins Weight: All Versions Approx. 2.0 oz. (57 g) DIMENSIONS [Unit Inch (mm)] .195 (4.95) 1.26 (32.0) 1.44 (36.58) 1.26 (32.0) 1.76 (44.70) MAX 6-32 NC-2B TAP .312 (7.92) MIN. DEEP 2.03 (51.56) OPTION WITHOUT STUD 1.25 (31.75) .375 (9.53) .355 (9.02) .078 (1.98) DIA. 1.30 (33.02) 1.30 (33.02) .211 (5.36) .304 (7.72) .437 (11.10) .065 (1.65) x .437 (11.10) .156 (3.96) x .218 (5.54) LG. 6-32 NC-2A THREAD 6-32 NC-2A THREAD 100/100RF .065 (1.65) x .156 (3.96) x .218 (5.54) LG. .370 (9.40) 100U/101U .355 (9.02) 100UP/101UP MOUNTING DIMENSIONS FOR PRINTED CIRCUIT TERMINALS ORDERING INFORMATION 5 AMP Part Numbers AC Coils MODEL POLE CONFIGUR. 24VAC 100 SPDT DPDT 3PDT 100U 100UP DC Coils 120VAC 240VAC 12VDC 24VDC 110VDC 20001-82 20003-82 20005-82 20001-84 20003-84 20005-84 20001-85 20003-85 20005-85 20007-81 20009-81 20011-81 20007-82 20009-82 20011-82 20007-84 20009-84 20011-84 SPDT DPDT 3PDT 20061-82 20063-82 20065-82 20061-84 20063-84* 20065-84 20061-85 20063-85 20065-85 20067-81 20069-81 20071-81 20067-82 20069-82 20071-82 20067-84 20069-84 20071-84 SPDT DPDT 3PDT 20792-82 20794-82 20796-82 20792-84 20794-84 20796-84 20792-85 20794-85 20796-85 20798-81 20800-81 20802-81 20798-82 20800-82 20802-82 20798-84 20800-84 20802-84 10 AMP Part Numbers 100 SPDT DPDT 3PDT 20002-82 20004-82 20006-82 20002-83 20004-83 20006-83 20002-84 20004-84 20006-84 20008-81 20010-81 20012-81 20008-82 20010-82 20012-82 20008-84 20010-84 20012-84 101U SPDT DPDT 3PDT 20062-82 20064-82* 20066-82 20062-84* 20064-84* 20066-84 20062-85 20064-85 20066-85 20068-81* 20070-81* 20072-81 20068-82 20070-82* 20072-82 20068-84 20070-84* 20072-84 101UP SPDT DPDT 3PDT 20793-82 20795-82 20797-82 20793-84 20795-84 20797-84 20793-85 20795-85 20797-85 20799-81 20801-81 20803-81 20799-82 20801-82 20803-82 20799-84 20801-84 20803-84 * Black Items Are Normally Stocked. Blue Items Are Non Stock. Minimum Quantity May Be Required. OPTIONAL MOUNTING BRACKETS TYPE D TYPE F TYPE G TYPE H .906 (23.01) (2) .156 (3.96) DIA. 3.00 (76.20) (2) .156 (3.96) DIA. 2.593 (65.86) 2.625 (66.68) .718 (18.24) 1.44 (36.58) 1.812 (46.03) .625 (15.88) .625 (15.88) .625 (15.88) 1.437 (36.50) 2.250 (57.15) 1.25 (28.58) 1.25 (28.58) (2) NO. 6-32 TAP 1.44 (36.58) 1.44 (36.58) 2.156 (54.76) (2) NO. 6-32 TAP 1.812 (46.03) .625 (15.88) OPTIONAL DUST COVER B-4 DUST COVER FOR SERIES 100 Sealed knock-out holes for standard conduit fittings. Relay mounts on pre-drilled base. Constructed of Aluminum. Snap action cover release. Accommodates relay series 100 and 100RF. SIZE: 4" W x 2-1/4" H x 2-1/4" D P/N 20256-80* 7