Point Contact Detectors With Replaceable Diodes 2087 Series V2.00 Features ● ● ● ● ● ● Broadband Frequency Ranges No Bias Required Flat Frequency Response Available in Matched Pairs5 Field Replaceable Diodes Passivated Stainless Steel Finish Flatness (Maximum) ±0.5 dB, 10 MHz to 4 GHz ±1.0 dB, 10 MHz to 8 GHz ±1.5 dB, 10 MHz to 12 GHz ±2.5 dB, 10 MHz to 18 GHz VSWR (Maximum) 1.5:1, 10 MHz to 4 GHz 2.0:1, 10 MHz to 8 GHz 3.0:1, 10 MHz to 12 GHz 3.5:1, 10 MHz to 18 GHz Tracking 0.8 dB (Matched Pair)5 Maximum Power 100 mW Output Polarity Negative4 Video Resistance 6K Ohms Typical2 Temperature Range –65°C to +100°C Frequency Range1 (GHz) Open Circuit Voltage Sensitivity2 (mV/mW) Min. Tangential Sensitivity3 (-dBm) Min. Output Capacitance Typical (pF) .01-18.0 400 45 12 Dimension A Inches (mm) 1.55 (39.4) Replacement Diode Part Number Detector Part Number 9999-4019-00 2087-6001-00 Notes: 1. Usable to 20 GHz 2. For RF power levels below -20 dBm, and with an open circuit load. 3. With video amplifier of 1 MHz bandwidth and 2 dB noise figure. 4. Consult factory for positive output or matched pairs. Specifications Subject to Change Without Notice. M/A-COM, Inc. North America: 1 Tel. (800) 366-2266 Fax (800) 618-8883 ■ Asia/Pacific: Tel. +81 (03) 3226-1671 Fax +81 (03) 3226-1451 ■ Europe: Tel. +44 (1344) 869 595 Fax +44 (1344) 300 020