DIVISION OF DELTROL CORP. 260 262 SERIES RELAY 5, 10, AND 15 AMP GENERAL PURPOSE W/.250QC TERMINALS 267F FEATURES MODELS ■ ■ ■ ■ 260: 261: 262: 265F: 266F: 267F: Class F Coil Insulation System for 155°C Total Temperature Coil Molded in DuPont Rynite® for Environmental Protection Unique Armature Stop Maintains Adjustment Fine Wire Gauge Coils are Skeined for Coil Integrity CONTACT DATA CONFIGURATION: Thru 3PDT MATERIALS: 5 AMP: 1/8" Diameter Moveable Fine Silver 3/16" Diameter Stationary Fine Silver 10 AMP: 3/16" Diameter Moveable Silver Cadmium Oxide 3/16" Diameter Stationary Fine Silver Gold Flash Standard on All 5 & 10 Amp Contacts Gold Diffused Available on Special Order – Min. Qty. Req’d. 15 AMP: 7/32" Diameter Moveable Silver Cadmium Oxide 7/32" Diameter Stationary Silver Cadmium Oxide CONTACT RATINGS MODEL 260/265 POLE CONFIGURATION thru 3PDT 261/266 thru 3PDT 262/267 thru 3PDT UL RATINGS 5 amp or 1/8 HP at 120VAC 5 amp or 1/4 HP at 277VAC 2 amp at 600VAC 5 amp at 28VDC 10 amp or 1/3 HP at 120VAC 10 amp or 1/2 HP at 277VAC* 10 amp at 28VDC 1 HP at 277VAC – 3 phase 3 amp or 1/2 HP at 600VAC 12 FLA, 35 LRA at 15VAC 15 amp or 1/2 HP at 120VAC 15 amp or 1 HP at 277VAC* 15 amp at 28 VDC * 3 Pole Devices Rated at 6-2/3 Amp When Switching Greater Than 150VAC, Unless Polarity is the Same on All Poles. UL RECOGNIZED FILE NO.: E37066 CSA CERTIFIED FILE NO.: LR20690 EXPECTED LIFE Electrical At Rated Load (Minimum) 100,000 Operations Except as Noted Mechanical Life 10,000,000 Operations DIELECTRIC STRENGTH 800 VRMS, 60 Hz Between Contacts 2200 VRMS, 60 Hz Between All Other Elements 5 Amp Open Frame 10 Amp Open Frame 15 Amp Open Frame 5 Amp with Flange Cover 10 amp with Flange Cover 15 Amp with Flange Cover Other Suffixes Available A-Indicator Lamp, B-Push to Test Button TM-Top Mount Cover, SL - Stud & Locating Tab COIL DATA MODEL POLE CONFIG. RESISTANCE NOMINAL IN OHMS COIL ± 10% POWER AMP RATING NOMINAL VOLTAGE 6VAC 12VAC 24VAC 48VAC 120VAC 240VAC 5.0 20 80 315 2025 8000 2.0VA 6VAC 12VAC 24VAC 48VAC 120VAC 240VAC 4.5 18 72 285 1850 7200 2.2VA 260/261 265F/ 266F SPDT 5, 10 260/261 265F/ 266F DPDT 3PDT 5, 10 262/ 267F SPDT DPDT 3PDT 15 260/261 265F/ 266F SPDT DPDT 3PDT 5, 10 6VDC 12VDC 24VDC 48VDC 110VDC 30 120 480 1850 10,000 1.2W 262/ 267F SPDT DPDT 3PDT 15 6VDC 12VDC 24VDC 48VDC 110VDC 24 96 375 1,500 8,000 1.5W Coil Voltages: AC: Up to 277 Volts/60 Hz DC: Up to 125 Volts Coil Treatment: Molded Rynite® Std. Class F Insulation Resistance: 100 Megohms Minimum UL Insulation System File No.: E74443 S155D 155°C Total Temperature Std. (Covers S105 Class A and S130D Class B Requirements) OPERATE DATA Pick Up (at 25°C): AC: Volts 85% or Less of Nominal DC: Volts 75% or Less of Nominal Operate Time: Approx. 15 Milliseconds Release Time: Approx. 15 Milliseconds ENVIRONMENTAL DATA Operating Ambient: AC: -45° to 55°C (Except 262 & 267) 262 & 267: -45° to 65°C DC: -45° to 70°C (Except 262 & 267) 262 & 267: -45° to 80°C Coil Temperature Rise: (25°C Ambient – Continuous Duty) AC: 45°C Approx. @ 60 Hz – Use at 50 Hz will Cause Slight Increase in Coil Rise DC: 25°C Approx. (Except 262 & 267) 262 & 267: 35°C Approx. MECHANICAL DATA Terminals: .250" x .032" Quick Connect/Solder Cover: Clear Polycarbonate – Flammability Rating 94V2 Weight: Approx. 3 oz. (85 g) 14 DIMENSIONS [Unit Inch (mm)] SCHEMATICS 2.13 (54.10) MAX. PUSH BUTTON .23 (5.84) 1.45 (36.83) 2.25 (57.15) 1.27 (32.26) 1.27 (32.26) .250 (6.35) x .032 (.81) Q.C. TERMINALS 262/267 .065 (1.65) x .156 (3.96) x .218 (5.54) TAB .065 (1.65) x .156 (3.96) x .218 (5.54) TAB .375 (9.53) 6-32 NC-2A THREAD .437 (11.10) SPDT 260-262 .0375 (.95) DPDT .437 (11.10) 6-32 NC-2B TAP .312 (7.92) MIN. DEEP 260-262SL ADD B FOR PUSHBUTTON 260-262L 2.90 (73.66) 2.50 (63.50) Ø .140 (3.56)/.145 (3.68) .69 (17.53) 6-32 NC-2A THREAD .437 (11.10) 3PDT .34 (8.64) 2.156 (54.76) .156 (3.96) .036 ± .005 (0.91) .500 ± .010 (12.70) 2.531 ± .010 (64.29) .062 (1.57) .625 (15.88) .065 (1.65) x .156 (3.96) x .218 (5.54) TAB .085 (2.16) MAX. .437 (11.10) 1.37 (34.80) 2.25 (57.15) 6-32 NC-2A THREAD 265-267 TM 1.50 (38.10) OPTIONAL TOP AND SIDE MOUNTINGS 265-267F ORDERING INFORMATION 5 AMP Part Numbers AC Coils MODEL 265F POLE CONFIGURATION SPDT DPDT 3PDT DC Coils 24VAC 120VAC 240VAC 12VDC 24VDC 110VDC 20596-82 20597-82 20874-82 20596-84 20597-84 20874-84 20596-85 20597-85 20874-85 20602-81 20603-81 20964-81 20602-82 20603-82 20964-82 20602-84 20603-84 20964-84 20598-82 20599-82 20914-82 20598-84 20599-84 20914-84 20598-85 20599-85 20914-85 20604-81 20605-81 20990-81 20604-82 20605-82 20990-82 20604-84 20605-84 20990-84 20600-82 20601-82* 20913-82 20600-84* 20601-84* 20913-84 20600-85 20601-85 20913-85 20606-81* 20607-81* 20860-81 20606-82* 20607-82* 20860-82 20606-84 20607-84 20860-84 10 AMP Part Numbers 266F SPDT DPDT 3PDT 15 AMP Part Numbers 267F SPDT DPDT 3PDT * Black Items are Normally Stocked. Blue Items are Non Stock. Minimum Quantity May Be Required. 15