DISCRETE SEMICONDUCTORS DATA SHEET M3D425 2PC4617J NPN general purpose transistor Product specification Supersedes data of 1999 May 04 2001 Aug 03 Philips Semiconductors Product specification NPN general purpose transistor 2PC4617J PINNING FEATURES • Power dissipation comparable to SOT23 PIN DESCRIPTION • Low output capacitance 1 base • Low saturation voltage VCEsat 2 emitter • Low current (max. 100 mA) 3 collector • Low voltage (max. 50 V). APPLICATIONS • General purpose switching and amplification in miniaturized application areas such as telecom and multimedia. handbook, halfpage 3 3 DESCRIPTION 1 NPN transistor encapsulated in an ultra small plastic SMD SC-89 (SOT490) package. PNP complement: 2PA1774J. 1 2 2 Top view MAM410 MARKING TYPE NUMBER MARKING CODE 2PC4617QJ ZQ 2PC4617RJ ZR 2PC4617SJ ZS Fig.1 Simplified outline (SC-89; SOT490) and symbol. LIMITING VALUES In accordance with the Absolute Maximum Rating System (IEC 60134). SYMBOL PARAMETER CONDITIONS MIN. MAX. UNIT VCBO collector-base voltage open emitter − 50 V VCEO collector-emitter voltage open base − 50 V VEBO emitter-base voltage open collector − 5 V IC collector current (DC) − 100 mA ICM peak collector current − 200 mA IBM peak base current Ptot total power dissipation Tstg − 200 mA − 250 mW storage temperature −65 +150 °C Tj junction temperature − 150 °C Tamb operating ambient temperature −65 +150 °C Tamb ≤ 25 °C; note 1 Note 1. Refer to SC-89 (SOT490) standard mounting conditions. 2001 Aug 03 2 Philips Semiconductors Product specification NPN general purpose transistor 2PC4617J THERMAL CHARACTERISTICS SYMBOL Rth j-a PARAMETER CONDITIONS thermal resistance from junction to ambient in free air; note 1 MAX. UNIT 500 K/W Note 1. Refer to SC-89 (SOT490) standard mounting conditions. CHARACTERISTICS Tamb = 25 °C unless otherwise specified. SYMBOL ICBO PARAMETER CONDITIONS MIN. MAX. UNIT IE = 0; VCB = 30 V − 100 nA IE = 0; VCB = 30 V; Tj = 150 °C − 5 µA − 100 nA 2PC4617QJ 120 270 2PC4617RJ 180 390 collector cut-off current IEBO emitter cut-off current IC = 0; VEB = 4 V hFE DC current gain IC = 1 mA; VCE = 6 V; note 1 270 560 VCEsat collector-emitter saturation voltage 2PC4617SJ IC = 50 mA; IB = 5 mA; note 1 − 200 mV Cc collector capacitance IE = ie = 0; VCB = 12 V; f = 1 MHz − 1.5 pF fT transition frequency IC = 2 mA; VCE = 12 V; f = 100 MHz; 100 note 1 − MHz Note 1. Pulse test: tp ≤ 300 µs; δ ≤ 0.02. 2001 Aug 03 3 Philips Semiconductors Product specification NPN general purpose transistor 2PC4617J PACKAGE OUTLINE Plastic surface mounted package; 3 leads SOT490 D E B A X HE v M A 3 A 1 c 2 e1 bp w M B Lp e detail X 0 1 2 mm scale DIMENSIONS (mm are the original dimensions) UNIT A bp c D E e e1 HE Lp v w mm 0.8 0.6 0.33 0.23 0.2 0.1 1.7 1.5 0.95 0.75 1.0 0.5 1.7 1.5 0.5 0.3 0.1 0.1 OUTLINE VERSION SOT490 2001 Aug 03 REFERENCES IEC JEDEC EIAJ SC-89 4 EUROPEAN PROJECTION ISSUE DATE 98-10-23 Philips Semiconductors Product specification NPN general purpose transistor 2PC4617J DATA SHEET STATUS DATA SHEET STATUS(1) PRODUCT STATUS(2) DEFINITIONS Objective data Development This data sheet contains data from the objective specification for product development. Philips Semiconductors reserves the right to change the specification in any manner without notice. Preliminary data Qualification This data sheet contains data from the preliminary specification. Supplementary data will be published at a later date. Philips Semiconductors reserves the right to change the specification without notice, in order to improve the design and supply the best possible product. Product data Production This data sheet contains data from the product specification. Philips Semiconductors reserves the right to make changes at any time in order to improve the design, manufacturing and supply. Changes will be communicated according to the Customer Product/Process Change Notification (CPCN) procedure SNW-SQ-650A. Notes 1. Please consult the most recently issued data sheet before initiating or completing a design. 2. The product status of the device(s) described in this data sheet may have changed since this data sheet was published. The latest information is available on the Internet at URL http://www.semiconductors.philips.com. DEFINITIONS DISCLAIMERS Short-form specification The data in a short-form specification is extracted from a full data sheet with the same type number and title. For detailed information see the relevant data sheet or data handbook. Life support applications These products are not designed for use in life support appliances, devices, or systems where malfunction of these products can reasonably be expected to result in personal injury. Philips Semiconductors customers using or selling these products for use in such applications do so at their own risk and agree to fully indemnify Philips Semiconductors for any damages resulting from such application. Limiting values definition Limiting values given are in accordance with the Absolute Maximum Rating System (IEC 60134). Stress above one or more of the limiting values may cause permanent damage to the device. These are stress ratings only and operation of the device at these or at any other conditions above those given in the Characteristics sections of the specification is not implied. Exposure to limiting values for extended periods may affect device reliability. Right to make changes Philips Semiconductors reserves the right to make changes, without notice, in the products, including circuits, standard cells, and/or software, described or contained herein in order to improve design and/or performance. Philips Semiconductors assumes no responsibility or liability for the use of any of these products, conveys no licence or title under any patent, copyright, or mask work right to these products, and makes no representations or warranties that these products are free from patent, copyright, or mask work right infringement, unless otherwise specified. Application information Applications that are described herein for any of these products are for illustrative purposes only. Philips Semiconductors make no representation or warranty that such applications will be suitable for the specified use without further testing or modification. 2001 Aug 03 5 Philips Semiconductors Product specification NPN general purpose transistor 2PC4617J NOTES 2001 Aug 03 6 Philips Semiconductors Product specification NPN general purpose transistor 2PC4617J NOTES 2001 Aug 03 7 Philips Semiconductors – a worldwide company Contact information For additional information please visit http://www.semiconductors.philips.com. Fax: +31 40 27 24825 For sales offices addresses send e-mail to: [email protected]. © Koninklijke Philips Electronics N.V. 2001 SCA73 All rights are reserved. Reproduction in whole or in part is prohibited without the prior written consent of the copyright owner. The information presented in this document does not form part of any quotation or contract, is believed to be accurate and reliable and may be changed without notice. No liability will be accepted by the publisher for any consequence of its use. Publication thereof does not convey nor imply any license under patent- or other industrial or intellectual property rights. Printed in The Netherlands 613514/03/pp8 Date of release: 2001 Aug 03 Document order number: 9397 750 08646