ETC GLR-3

Bussmann®
Specialty Fuse
GLR
& HLR
Fast-Acting, Non-Rejecting
Dimensional Data
FUSE
0.63"
(15.9mm)
FUSE AND CARRIER
HLR
GLR-⁄Ω™
HLR
GLR-6
HLR
GLR-1
HLR
GLR-7
HLR
GLR-1⁄Ω™
HLR
GLR-8
HLR
GLR-1flꭧ
HLR
GLR-9
HLR
GLR-2
HLR
GLR-10
HLR
GLR-3
HLR
GLR-12
HLR
GLR-4
HLR
GLR-15
HLR
General Information:
• HLR carrier comes with 6∑ of #18 red insulated solid copper
wire attached to the line side.
• Customer inserts a #18 insulated solid copper wire into
load side receptacle.
• Order part number HLR-2A to obtain 6∑ of #18 black
insulated solid copper wire pre-installed in a load side
receptacle.
• Order part number HLR-2L to obtain 6∑ of #18 black
insulated solid copper wire packaged loose (un-installed).
• Fuse and knob are an integral one-piece unit. There are no
replacement knobs (caps).
• Units can be panel-mounted with a separate steel clip
(BK/A-104).
CE logo denotes compliance with European Union Low Voltage Directive
(50-1000 Vac, 75-1500 Vdc). Refer to BIF document #8002 or contact
Bussmann Application Engineering at 314-527-1270 for more information.
12-18-98
SB98107
Rev. A
10.41
.410
Keyhole Punch
Knockout Hole
15
7
10
5
100
2
1
1.5
Time-Current Characteristic Curves–Average Melt
AMPERE
RATING
10
1
.1
.01
200
Carrier
GLR-5
16.13
.635
18.80
.740
100
Fuse
HLR
6.48
.255
22.10
.870
10
Carrier
GLR-‹Ω¡§
C
L
MOUNTING HOLE
1
Fuse
21.59
.850
TIME IN SECONDS
Electrical Ratings for Type GLR Fuses and Non-Rejection
Style Carriers
18.29
.720
.1
Catalog Symbol: GLR (Fuse) HLR (Fuseholder)
Fast-Acting, Non-Rejection Style Fuse
Ampere Rating: ‹Ω¡§-15 Amperes
Voltage Rating: 300 Volts AC or less
Interrupting Rating: 10,000 Amperes
Agency Approvals:
GLR Fuse:
U.L. Listed, Std. 248-14
‹Ω¡§-15A/300 Vac, Guide JDYX, File E19180
CSA Certified, C22.2 No. 248.14, 0-10A/300 Vac
Class 1422-01, File 53787
HLR Fuseholder:
U.L. Recognized, 12A, 300 Vac, Guide IZLT2, File E14853
CSA Certified, 12A, 300 Vac, Class 6225-01, File 47235
HLR-2A:
U.L. Recognized, 15A, 300 Vac, Guide IZLT2, File E14853
CSA Certified, 15A, 300 Vac, Class 6225-01, File 47235
57.15
2.250
21.59
.850
CURRENT IN AMPERES
The only controlled copy of this BIF document is the electronic read-only version located on
the Bussmann Network Drive. All other copies of this document are by definition
uncontrolled. This bulletin is intended to clearly present comprehensive product data and
provide technical information that will help the end user with design applications. Bussmann
reserves the right, without notice, to change design or construction of any products and to
discontinue or limit distribution of any products. Bussmann also reserves the right to change
or update, without notice, any technical information contained in this bulletin. Once a
product has been selected, it should be tested by the user in all possible applications.
Form No. GLR
Page 1 of 1
BIF Doc #2032