ETC HD6413006

To all our customers
Regarding the change of names mentioned in the document, such as Hitachi
Electric and Hitachi XX, to Renesas Technology Corp.
The semiconductor operations of Mitsubishi Electric and Hitachi were transferred to Renesas
Technology Corporation on April 1st 2003. These operations include microcomputer, logic, analog
and discrete devices, and memory chips other than DRAMs (flash memory, SRAMs etc.)
Accordingly, although Hitachi, Hitachi, Ltd., Hitachi Semiconductors, and other Hitachi brand
names are mentioned in the document, these names have in fact all been changed to Renesas
Technology Corp. Thank you for your understanding. Except for our corporate trademark, logo and
corporate statement, no changes whatsoever have been made to the contents of the document, and
these changes do not constitute any alteration to the contents of the document itself.
Renesas Technology Home Page: http://www.renesas.com
Renesas Technology Corp.
Customer Support Dept.
April 1, 2003
Cautions
Keep safety first in your circuit designs!
1.
Renesas Technology Corporation puts the maximum effort into making semiconductor products better and more reliable, but
there is always the possibility that trouble may occur with them. Trouble with semiconductors may lead to personal injury, fire
or property damage.
Remember to give due consideration to safety when making your circuit designs, with appropriate measures such as (i)
placement of substitutive, auxiliary circuits, (ii) use of nonflammable material or (iii) prevention against any malfunction or
mishap.
Notes regarding these materials
1.
These materials are intended as a reference to assist our customers in the selection of the Renesas Technology Corporation
product best suited to the customer's application; they do not convey any license under any intellectual property rights, or any
other rights, belonging to Renesas Technology Corporation or a third party.
2.
Renesas Technology Corporation assumes no responsibility for any damage, or infringement of any third-party's rights,
originating in the use of any product data, diagrams, charts, programs, algorithms, or circuit application examples contained in
these materials.
3.
All information contained in these materials, including product data, diagrams, charts, programs and algorithms represents
information on products at the time of publication of these materials, and are subject to change by Renesas Technology
Corporation without notice due to product improvements or other reasons. It is therefore recommended that customers contact
Renesas Technology Corporation or an authorized Renesas Technology Corporation product distributor for the latest product
information before purchasing a product listed herein.
The information described here may contain technical inaccuracies or typographical errors.
Renesas Technology Corporation assumes no responsibility for any damage, liability, or other loss rising from these
inaccuracies or errors.
Please also pay attention to information published by Renesas Technology Corporation by various means, including the
Renesas Technology Corporation Semiconductor home page (http://www.renesas.com).
4.
When using any or all of the information contained in these materials, including product data, diagrams, charts, programs, and
algorithms, please be sure to evaluate all information as a total system before making a final decision on the applicability of
the information and products. Renesas Technology Corporation assumes no responsibility for any damage, liability or other
loss resulting from the information contained herein.
5.
Renesas Technology Corporation semiconductors are not designed or manufactured for use in a device or system that is used
under circumstances in which human life is potentially at stake. Please contact Renesas Technology Corporation or an
authorized Renesas Technology Corporation product distributor when considering the use of a product contained herein for
any specific purposes, such as apparatus or systems for transportation, vehicular, medical, aerospace, nuclear, or undersea
repeater use.
6.
The prior written approval of Renesas Technology Corporation is necessary to reprint or reproduce in whole or in part these
materials.
7.
If these products or technologies are subject to the Japanese export control restrictions, they must be exported under a license
from the Japanese government and cannot be imported into a country other than the approved destination.
Any diversion or reexport contrary to the export control laws and regulations of Japan and/or the country of destination is
prohibited.
8.
Please contact Renesas Technology Corporation for further details on these materials or the products contained therein.
PC Card Interface
for E6000 and E8000 Emulators
User’s Manual
ADE-702-324
Rev. 1.0
07/08/02
Hitachi, Ltd.
HS6000EIP01HE(A)
Cautions
1. Hitachi neither warrants nor grants licenses of any rights of Hitachi’s or any third party’s
patent, copyright, trademark, or other intellectual property rights for information contained in
this document. Hitachi bears no responsibility for problems that may arise with third party’s
rights, including intellectual property rights, in connection with use of the information
contained in this document.
2. Products and product specifications may be subject to change without notice. Confirm that you
have received the latest product standards or specifications before final design, purchase or
use.
3. Hitachi makes every attempt to ensure that its products are of high quality and reliability.
However, contact Hitachi’s sales office before using the product in an application that
demands especially high quality and reliability or where its failure or malfunction may directly
threaten human life or cause risk of bodily injury, such as aerospace, aeronautics, nuclear
power, combustion control, transportation, traffic, safety equipment or medical equipment for
life support.
4. Design your application so that the product is used within the ranges guaranteed by Hitachi
particularly for maximum rating, operating supply voltage range, heat radiation characteristics,
installation conditions and other characteristics. Hitachi bears no responsibility for failure or
damage when used beyond the guaranteed ranges. Even within the guaranteed ranges,
consider normally foreseeable failure rates or failure modes in semiconductor devices and
employ systemic measures such as fail-safes, so that the equipment incorporating Hitachi
product does not cause bodily injury, fire or other consequential damage due to operation of
the Hitachi product.
5. This product is not designed to be radiation resistant.
6. No one is permitted to reproduce or duplicate, in any form, the whole or part of this document
without written approval from Hitachi.
7. Contact Hitachi’s sales office for any questions regarding this document or Hitachi
semiconductor products.
IMPORTANT INFORMATION
READ FIRST
• READ this user's manual before using this emulator product.
• KEEP the user's manual handy for future reference.
Do not attempt to use the emulator product until you fully understand its mechanism.
Emulator Product:
Throughout this document, the term "emulator product" shall be defined as the following
products produced only by Hitachi, Ltd. excluding all subsidiary products.
•
•
•
•
Emulator (including the evaluation chip set)
PC card interface
User system interface cable
Optional board (including the memory board)
The user system or a host computer is not included in this definition.
Purpose of the Emulator Product:
This emulator product is a software and hardware development tool for systems employing the
Hitachi microcomputers. This emulator product must only be used for the above purpose.
Limited Applications:
This emulator product is not authorized for use in MEDICAL, atomic energy, aeronautical or
space technology applications without consent of the appropriate officer of a Hitachi sales
company. Such use includes, but is not limited to, use in life support systems. Buyers of this
emulator product must notify the relevant Hitachi sales offices before planning to use the product
in such applications.
Improvement Policy:
Hitachi, Ltd. (including its subsidiaries, hereafter collectively referred to as Hitachi) pursues a
policy of continuing improvement in design, functions, performance, and safety of the emulator
product. Hitachi reserves the right to change, wholly or partially, the specifications, design, user's
manual, and other documentation at any time without notice.
Target User of the Emulator Product:
This emulator product should only be used by those who have carefully read and thoroughly
understood the information and restrictions contained in the user's manual. Do not attempt to use
the emulator product until you fully understand its mechanism.
It is highly recommended that first-time users be instructed by users that are well versed in the
operation of the emulator product.
I
LIMITED WARRANTY
Hitachi warrants its emulator products to be manufactured in
accordance with published specifications and free from defects in
material
and/or workmanship. Hitachi, at its option, will repair or replace any
emulator products returned intact to the factory, transportation charges
prepaid, which Hitachi, upon inspection, shall determine to be defective
in material and/or workmanship. The foregoing shall constitute the sole
remedy for any breach of Hitachi's warranty. See the Hitachi warranty
booklet for details on the warranty period. This warranty extends only to
you, the original Purchaser. It is not transferable to anyone who
subsequently purchases the emulator product from you. Hitachi is not
liable for any claim made by a third party or made by you for a third
party.
DISCLAIMER
HITACHI MAKES NO WARRANTIES, EITHER EXPRESS OR
IMPLIED, ORAL OR WRITTEN, EXCEPT AS PROVIDED
HEREIN, INCLUDING WITHOUT LIMITATION THEREOF,
WARRANTIES AS TO MARKETABILITY, MERCHANTABILITY,
FITNESS FOR ANY PARTICULAR PURPOSE OR USE, OR
AGAINST INFRINGEMENT OF ANY PATENT. IN NO EVENT
SHALL HITACHI BE LIABLE FOR ANY DIRECT, INCIDENTAL
OR CONSEQUENTIAL DAMAGES OF ANY NATURE, OR
LOSSES OR EXPENSES RESULTING FROM ANY DEFECTIVE
EMULATOR PRODUCT, THE USE OF ANY EMULATOR
PRODUCT, OR ITS DOCUMENTATION, EVEN IF ADVISED
OF THE POSSIBILITY OF SUCH DAMAGES. EXCEPT AS
EXPRESSLY STATED OTHERWISE IN THIS WARRANTY,
THIS EMULATOR PRODUCT IS SOLD "AS IS ", AND YOU
MUST ASSUME ALL RISK FOR THE USE AND RESULTS
OBTAINED FROM THE EMULATOR PRODUCT.
II
State Law:
Some states do not allow the exclusion or limitation of implied warranties or liability for
incidental or consequential damages, so the above limitation or exclusion may not apply to you.
This warranty gives you specific legal rights, and you may have other rights which may vary from
state to state.
The Warranty is Void in the Following Cases:
Hitachi shall have no liability or legal responsibility for any problems caused by misuse, abuse,
misapplication, neglect, improper handling, installation, repair or modifications of the emulator
product without Hitachi's prior written consent or any problems caused by the user system.
All Rights Reserved:
This user's manual and emulator product are copyrighted and all rights are reserved by Hitachi.
No part of this user's manual, all or part, may be reproduced or duplicated in any form, in hardcopy or machine-readable form, by any means available without Hitachi's prior written consent.
Other Important Things to Keep in Mind:
1. Circuitry and other examples described herein are meant merely to indicate the characteristics
and performance of Hitachi's semiconductor products. Hitachi assumes no responsibility for
any intellectual property claims or other problems that may result from applications based on
the examples described herein.
2. No license is granted by implication or otherwise under any patents or other rights of any third
party or Hitachi.
Figures:
Some figures in this user's manual may show items different from your actual system.
Limited Anticipation of Danger:
Hitachi cannot anticipate every possible circumstance that might involve a potential hazard.
The warnings in this user's manual and on the emulator product are therefore not all inclusive.
Therefore, you must use the emulator product safely at your own risk.
III
SAFETY PAGE
READ FIRST
• READ this user's manual before using this emulator product.
• KEEP the user's manual handy for future reference.
Do not attempt to use the emulator product until you fully understand its mechanism.
DEFINITION OF SIGNAL WORDS
DANGER indicates an imminently hazardous situation which, if not avoided,
will result in DEATH or SERIOUS INJURY to you or other people.
WARNING indicates a potentially hazardous situation which, if not avoided,
could result in DEATH or SERIOUS INJURY to you or other people.
CAUTION indicates a hazardous situation which, if not avoided, may result in minor or
moderate injury to you or other people, or may result in damage to the
machine or loss of the user program. It may also be used to alert against
unsafe usage.
NOTE emphasizes essential information.
WARNING
Observe the precautions listed below. Failure to do so
will result in a FIRE HAZARD and will damage the PC card
interface, the host computer, and the emulator product or will
result in PERSONAL INJURY. The USER PROGRAM will be
LOST.
1. Always switch OFF the emulator and host computer before
connecting or disconnecting any CABLES, CARDS, or PARTS.
2. Always before inserting the PC card interface into the host
computer, make sure that the PC card interface is correctly
oriented in the direction of Insert .
IV
Notice
When using this document, keep the following in mind:
1. This document may, wholly or partially, be subject to change without notice.
2. All rights are reserved: No one is permitted to reproduce or duplicate, in any form, the whole
or part of this document without Hitachi’s permission.
3. Hitachi will not be held responsible for any damage to the user that may result from accidents
or any other reasons during operation of the user’s unit according to this document.
4. Circuitry and other examples described herein are meant merely to indicate the characteristics
and performance of Hitachi’s semiconductor products. Hitachi assumes no responsibility for
any intellectual property claims or other problems that may result from applications based on
the examples described herein.
5. No license is granted by implication or otherwise under any patents or other rights of any third
party or Hitachi, Ltd.
6. MEDICAL APPLICATIONS: Hitachi’s products are not authorized for use in MEDICAL
APPLICATIONS without the written consent of the appropriate officer of Hitachi’s sales
company. Such use includes, but is not limited to, use in life support systems. Buyers of
Hitachi’s products are requested to notify the relevant Hitachi sales offices when planning to
use the products in MEDICAL APPLICATIONS.
Preface
Thank you for purchasing the PC card interface (HS6000EIP01H) for the E6000 and E8000
emulators.
The PC card interface for the E6000 and E8000 emulators (hereafter called the PC card interface)
connects the E6000 or E8000 emulator (hereafter called the emulator) to the host computer that
has an interface conforming to the PC card specification TYPE II.
®
®
Note: Microsoft and Windows are registered trademarks of Microsoft Corporation in the
United States and in other countries.
i
Contents
Section 1 Specifications.....................................................................................1
Section 2 Components .......................................................................................2
Section 3 Preparation before Use ......................................................................3
3.1
3.2
Connecting to Host Computer........................................................................................... 3
Connecting to the Emulator .............................................................................................. 4
3.2.1 Connecting to the E6000 Emulator...................................................................... 4
3.2.2 Connecting to the E8000 Emulator...................................................................... 5
Section 4 Start Up..............................................................................................6
Section 5 Notes on Use......................................................................................8
ii
Section 1 Specifications
Table 1 lists the PC card interface specifications.
Table 1
PC Card Interface Specifications
Item
Specifications
Host computer
Personal computer conforming to the PCMCIA card specification
TYPE II
Operating system for host
computer
Microsoft Windows 95 operating system (the PC card interface
®
®
does not operate on Microsoft Windows operating system
version 3.1)
Emulator
Hitachi E6000 emulator or E8000 emulator series
®
®
External dimensions
PC card: 54 mm x 85.5 mm x 4.6 mm
Weight
PC card: 29 g
Temperature
Operating: 10°C to 35°C
Storage: –10°C to 50°C
Humidity
Operating: 35%RH to 80%RH (no condensation)
Storage: 35%RH to 80%RH (no condensation)
Vibration
Operating: 2.45 m/s2 max.
Storage: 4.9 m/s2 max.
Transportation: 14.7 m/s2 max.
Ambient gases
No corrosive gases
Power-supply voltage
5.0 V ± 0.25 V
Current consumption
100 mA (max.)
1
Section 2 Components
Table 2 lists the PC card interface components.
Table 2
Components
Item
Product Name
Hardware
Manual
2
Quantity
Remarks
PC card interface
1
—
Interface cable
1
Cable length: 1.5 m
User's manual
(this manual)
1
HS6000EIP01HE
Configuration
Section 3 Preparation before Use
3.1
Connecting to Host Computer
WARNING
Always switch OFF the emulator and host computer, and
make sure that the PC card interface is correctly oriented in the
direction of Insert before connecting or disconnecting the PC
CARD INTERFACE. Failure to do so will result in a FIRE
HAZARD and will damage the PC card interface, the host
computer, and the emulator product or will result in PERSONAL
INJURY. The USER PROGRAM will be LOST.
1. Check that the emulator and the host computer are turned off.
CAUTION
When connecting or removing the PC card interface, apply
force only in the direction suitable for connection or removal,
while making sure not to bend or twist the PC card interface;
otherwise the PC card interface will be damaged.
2. Align the PC card interface to the guide in the PC card slot of the host computer, and insert the
PC card interface in the direction indicated as Insert on the PC card interface until it locks.
Figure 1 Connecting to Host Computer
3
3.2
Connecting to the Emulator
WARNING
Observe the precautions listed below. Failure to do so
will result in a FIRE HAZARD and will damage the PC card
interface, the host computer, and the emulator product or will
result in PERSONAL INJURY. The USER PROGRAM will be
LOST.
1. Always switch OFF the emulator and host computer before
connecting or disconnecting any CABLES, CARDS, or PARTS.
2. Always before connecting the interface cable to the emulator
product, make sure that the connectors on both sides are
correctly aligned.
3.2.1
Connecting to the E6000 Emulator
When using the E6000 emulator, use the interface cable supplied together with the PC card
interface, and connect the PC card interface to the E6000 emulator station through the interface
cable as shown in figure 2.
Figure 2 Connecting to E6000 Emulator
4
3.2.2
Connecting to the E8000 Emulator
When using the E8000 emulator, use the interface cable supplied together with the PC card
interface, and connect the PC card interface to the E8000 emulator through the interface cable as
shown in figure 3.
Figure 3 Connecting to E8000 Emulator
5
Section 4 Start Up
Start up the host computer and the emulator using the following procedure. Here, the E6000
emulator is used for an example; the E8000 emulator can also be started using the same
procedure.
1. Install the Hitachi debugging interface (HDI) as the emulator control software in the host
computer. Insert the HDI installation disk into the floppy disk drive of the host computer, and
execute the SETUP file to install the HDI. For details, refer to the E6000 Emulator User's
Manual.
2. After the HDI installation has been completed, remove the installation disk from the host
computer, and turn off the host computer.
3. Check that the host computer and emulator are turned off. Insert the PC card interface into the
host computer, and connect the emulator to the PC card interface through the interface cable
(refer to section 3, Preparation before Use).
®
®
4. Turn on the host computer and initiate Windows . When Windows has been successfully
initiated and the host computer has detected the PC card interface, the message box prompting
the user to specify the target driver software will be displayed .
®
Figure 4 Message Box at Windows Start-up
5. According to the message on the dialog box, insert the installation disk #1 into the floppy disk
drive, and click OK.
6
6. Turn on the emulator and double-click the HDI icon to initiate the HDI. When the HDI has
been initiated successfully, the dialog box shown in figure 5 will be displayed.
Figure 5 Dialog Box at HDI Start-up
7. Select the PCMCIA on the dialog box, and click OK. The Link up is displayed on the status
bar, which shows that the HDI start-up procedure has been completed successfully.
7
Section 5 Notes on Use
1. This PC card interface is only for use with the Hitachi E6000 or E8000 emulator. Do not use
with any other emulator together with the PC card interface.
2. Protect the PC card interface from excessive impacts and stresses. Keep out of direct sunlight,
heat, and high humidity.
3. Do not disassemble the PC card interface or interface cable.
4. Be sure to turn off the host computer and the emulator before inserting or removing the PC
card interface.
8