User’s Manual
IE-V850ES-G1
In-Circuit Emulator
Target Device
V850ES
Document No. U16313EJ1V0UM00 (1st edition)
Date Published March 2003 N CP(K)
©
Printed in Japan
[MEMO]
2
User’s Manual U16313EJ1V0UM
V850ES/SA2, V850ES/SA3, V850ES/KF1, V850ES/KG1, and V850ES/KJ1 are trademarks of NEC Electronics
Corporation.
Windows is either a trademark or a registered trademark of Microsoft Corporation in the United States and/or
other countries.
PC/AT is a trademark of International Business Machines Corporation.
User’s Manual U16313EJ1V0UM
3
Caution
This equipment is intended for indoor use only.
Before connecting the equipment to AC-mains the casing must be closed.
• The information in this document is current as of November, 2002. The information is subject to
change without notice. For actual design-in, refer to the latest publications of NEC Electronics data
sheets or data books, etc., for the most up-to-date specifications of NEC Electronics products. Not
all products and/or types are available in every country. Please check with an NEC Electronics sales
representative for availability and additional information.
• No part of this document may be copied or reproduced in any form or by any means without the prior
written consent of NEC Electronics. NEC Electronics assumes no responsibility for any errors that may
appear in this document.
• NEC Electronics does not assume any liability for infringement of patents, copyrights or other intellectual
property rights of third parties by or arising from the use of NEC Electronics products listed in this document
or any other liability arising from the use of such products. No license, express, implied or otherwise, is
granted under any patents, copyrights or other intellectual property rights of NEC Electronics or others.
• Descriptions of circuits, software and other related information in this document are provided for illustrative
purposes in semiconductor product operation and application examples. The incorporation of these
circuits, software and information in the design of a customer's equipment shall be done under the full
responsibility of the customer. NEC Electronics assumes no responsibility for any losses incurred by
customers or third parties arising from the use of these circuits, software and information.
• While NEC Electronics endeavors to enhance the quality, reliability and safety of NEC Electronics products,
customers agree and acknowledge that the possibility of defects thereof cannot be eliminated entirely. To
minimize risks of damage to property or injury (including death) to persons arising from defects in NEC
Electronics products, customers must incorporate sufficient safety measures in their design, such as
redundancy, fire-containment and anti-failure features.
• NEC Electronics products are classified into the following three quality grades: "Standard", "Special" and
"Specific".
The "Specific" quality grade applies only to NEC Electronics products developed based on a customerdesignated "quality assurance program" for a specific application. The recommended applications of an NEC
Electronics product depend on its quality grade, as indicated below. Customers must check the quality grade of
each NEC Electronics product before using it in a particular application.
"Standard": Computers, office equipment, communications equipment, test and measurement equipment, audio
and visual equipment, home electronic appliances, machine tools, personal electronic equipment
and industrial robots.
"Special": Transportation equipment (automobiles, trains, ships, etc.), traffic control systems, anti-disaster
systems, anti-crime systems, safety equipment and medical equipment (not specifically designed
for life support).
"Specific": Aircraft, aerospace equipment, submersible repeaters, nuclear reactor control systems, life
support systems and medical equipment for life support, etc.
The quality grade of NEC Electronics products is "Standard" unless otherwise expressly specified in NEC
Electronics data sheets or data books, etc. If customers wish to use NEC Electronics products in applications
not intended by NEC Electronics, they must contact an NEC Electronics sales representative in advance to
determine NEC Electronics' willingness to support a given application.
(Note)
(1) "NEC Electronics" as used in this statement means NEC Electronics Corporation and also includes its
majority-owned subsidiaries.
(2) "NEC Electronics products" means any product developed or manufactured by or for NEC Electronics (as
defined above).
M8E 02. 11-1
4
User’s Manual U16313EJ1V0UM
Regional Information
Some information contained in this document may vary from country to country. Before using any NEC
Electronics product in your application, pIease contact the NEC Electronics office in your country to
obtain a list of authorized representatives and distributors. They will verify:
•
Device availability
•
Ordering information
•
Product release schedule
•
Availability of related technical literature
•
Development environment specifications (for example, specifications for third-party tools and
components, host computers, power plugs, AC supply voltages, and so forth)
•
Network requirements
In addition, trademarks, registered trademarks, export restrictions, and other legal issues may also vary
from country to country.
NEC Electronics America, Inc. (U.S.)
Santa Clara, California
Tel: 408-588-6000
800-366-9782
Fax: 408-588-6130
800-729-9288
NEC Electronics (Europe) GmbH
Duesseldorf, Germany
Tel: 0211-65 03 01
Fax: 0211-65 03 327
• Sucursal en España
Madrid, Spain
Tel: 091-504 27 87
Fax: 091-504 28 60
• Succursale Française
Vélizy-Villacoublay, France
Tel: 01-30-67 58 00
Fax: 01-30-67 58 99
• Filiale Italiana
Milano, Italy
Tel: 02-66 75 41
Fax: 02-66 75 42 99
NEC Electronics Hong Kong Ltd.
• Branch The Netherlands
Eindhoven, The Netherlands
Tel: 040-244 58 45
Fax: 040-244 45 80
NEC Electronics Hong Kong Ltd.
Hong Kong
Tel: 2886-9318
Fax: 2886-9022/9044
Seoul Branch
Seoul, Korea
Tel: 02-528-0303
Fax: 02-528-4411
• Tyskland Filial
Taeby, Sweden
Tel: 08-63 80 820
Fax: 08-63 80 388
NEC Electronics Shanghai, Ltd.
• United Kingdom Branch
Milton Keynes, UK
Tel: 01908-691-133
Fax: 01908-670-290
NEC Electronics Taiwan Ltd.
Shanghai, P.R. China
Tel: 021-6841-1138
Fax: 021-6841-1137
Taipei, Taiwan
Tel: 02-2719-2377
Fax: 02-2719-5951
NEC Electronics Singapore Pte. Ltd.
Novena Square, Singapore
Tel: 6253-8311
Fax: 6250-3583
J02.11
User’s Manual U16313EJ1V0UM
5
INTRODUCTION
Target Readers
This manual is intended for users who design and develop application systems
using V850ES microcontrollers.
Purpose
Debugging can be performed efficiently with this emulator (IE-V850ES-G1)
connected to a dedicated emulation board when designing and developing
application systems using V850ES microcontrollers.
The purpose of this manual is to describe the proper operation of the IEV850ES-G1 and its basic specifications.
Organization
This manual is broadly divided into the following parts.
• Overview
• Names and functions of parts
• Connection of parts
• Factory settings
How to Read This Manual
It is assumed that the reader of this manual has general knowledge in the fields of
electrical engineering, logic circuits, and microcontrollers.
To learn about the basic specifications and operation
→Read this manual in the order listed in the CONTENTS.
To learn the operation methods, command functions, etc., of the IE-V850ES-G1
→Read the user’s manual of the debugger (sold separately) that is used.
Conventions
Note:
Footnote for item marked with Note in the text
Caution:
Information requiring particular attention
Remark:
Supplementary information
Numeral representation:
Binary … ×××× or ××××B
Decimal ... ××××
Hexadecimal ... ××××H
Prefix representing a power of 2 (address space, memory capacity):
Terminology
6
10
K (kilo):
2 = 1024
M (mega):
2 = 1024
20
2
The meanings of terms used in this manual are listed below.
Target device
This is the device to be emulated.
Target system
The system (user-built system) to be debugged.
configured by the user.
Emulation CPU
CPU that executes the program created by the user in the emulator.
This includes the target program and hardware
User’s Manual U16313EJ1V0UM
Related Documents
When using this manual, refer to the following manuals.
The related documents (user’s manuals) indicated in this publication may include
preliminary versions. However, preliminary versions are not marked as such.
{
Documents Related to Development Tools (User’s Manuals)
Document Name
Document Number
IE-V850ES-G1 (In-Circuit Emulator for V850ES)
This manual
TM
TM
To be prepared
TM
TM
IE-703217-G1-EM1 (In-Circuit Emulator Option Board for V850ES/KF1 , V850ES/KG1 ,
V850ES/KJ1TM)
To be prepared
CA850 Ver.2.50 (C Compiler Package)
Operation
U16053E
C Language
U16054E
PM Plus
U16055E
IE-703204-G1-EM1 (In-Circuit Emulator Option Board for V850ES/SA2 , V850ES/SA3 )
Assembly Language
U16042E
ID850 Ver.2.50 (Integrated Debugger)
Operation Windows Based
U16217E
SM850 Ver.2.50 (System Simulator)
Operation Windows Based
U16218E
SM850 Ver. 2.00 or Later System Simulator
External Parts User Open
Interface Specifications
U14873E
RX850 Ver. 3.13 or Later Real-Time OS
Basics
U13430E
Installation
U13410E
Technical
U13431E
Basics
U13773E
Installation
U13774E
Technical
U13772E
RX850 Pro Ver. 3.13 Real-Time OS
TM
RD850 Ver.3.01 Task Debugger
U13737E
RD850 Pro Ver.3.01 Task Debugger
U13916E
AZ850 Ver.3.10 System Performance Analyzer
U14410E
PG-FP4 Flash Memory Programmer
U15260E
Caution
The related documents listed above are subject to change without notice. Be sure to use the
latest version of each document for designing.
User’s Manual U16313EJ1V0UM
7
CONTENTS
CHAPTER 1 OVERVIEW ......................................................................................................................... 11
1.1 Hardware Configuration ............................................................................................................. 12
1.2 Features........................................................................................................................................ 13
1.3 Function Specifications.............................................................................................................. 14
1.4 Hardware Configuration ............................................................................................................. 15
1.5 System Configuration ................................................................................................................. 16
1.6 Contents in Carton ...................................................................................................................... 17
1.7 Setup............................................................................................................................................. 19
1.7.1 When using the emulator on a stand-alone basis for performing software debugging ......................19
1.7.2 When performing hardware debugging with target system................................................................20
CHAPTER 2 PART NAMES AND FUNCTIONS................................................................................... 21
2.1 Part Names and Functions of IE-V850ES-G1............................................................................ 21
2.2 Clock Settings ............................................................................................................................. 24
2.3 CPU Operating Voltage Range................................................................................................... 24
2.4 Cover Open/Close Procedure .................................................................................................... 25
2.4.1 Removing probe and replacing clock module ....................................................................................25
2.4.2 Replacing board.................................................................................................................................27
2.4.3 Closing cover .....................................................................................................................................29
CHAPTER 3 CONNECTION OF COMPONENTS ................................................................................. 30
3.1 Connection to Personal Computer ............................................................................................ 30
3.1.1 Overview of connection......................................................................................................................30
3.1.2 Connection procedure........................................................................................................................30
3.1.3 Insertion of PC interface board ..........................................................................................................31
3.1.4 Connection of PC interface cable ......................................................................................................32
3.2
3.3
3.4
Connection to Target System .................................................................................................... 33
Connection of External Logic Probe ......................................................................................... 33
Cable Connections...................................................................................................................... 35
3.4.1 Connection of power supply cable .....................................................................................................35
3.4.2 PC interface cable connection ...........................................................................................................36
3.4.3 External logic probe connection.........................................................................................................37
3.4.4 Additional information ........................................................................................................................37
3.5
System Power-on and Power-off ............................................................................................... 38
3.5.1 Power-on procedure ..........................................................................................................................38
3.5.2 Power-off procedure ..........................................................................................................................38
CHAPTER 4 FACTORY SETTINGS ....................................................................................................... 39
4.1 Factory Settings .......................................................................................................................... 39
APPENDIX A DIMENSIONS .................................................................................................................... 40
8
User’s Manual U16313EJ1V0UM
LIST OF FIGURES
Figure No.
Title
Page
1-1
Basic Hardware Configuration.........................................................................................................................15
1-2
System Configuration ......................................................................................................................................16
1-3
Contents in Carton ..........................................................................................................................................17
1-4
Accessories .....................................................................................................................................................18
2-1
Part Names and Functions of IE-V850ES-G1 on Front Side...........................................................................21
2-2
TRGOUT Signal Connector.............................................................................................................................22
2-3
Part Names and Functions of IE-V850ES-G1 on Back Side ...........................................................................23
2-4
Part Names and Functions of Board ...............................................................................................................24
2-5
Cover Open/Close Procedure 1 (Removing Front Cover 1)............................................................................25
2-6
Cover Open/Close Procedure 1 (After Front Cover 1 Is Removed) ................................................................26
2-7
Cover Open/Close Procedure 2 (Loosening Screws) .....................................................................................27
2-8
Cover Open/Close Procedure 2 (Pulling up Front Cover 2) ............................................................................28
2-9
Cover Open/Close Procedure 2 (After Front Cover Is Pulled up) ...................................................................29
3-1
Rear View of PC..............................................................................................................................................31
3-2
Inserting PC Interface Board ...........................................................................................................................31
3-3
Connection of PC Interface Board and PC Interface Cable ............................................................................32
3-4
Connection of External Logic Probe................................................................................................................33
3-5
External Logic Probe Connector Pins .............................................................................................................34
3-6
Connection of Power Supply Cable.................................................................................................................35
3-7
PC Interface Cable Connection.......................................................................................................................36
User’s Manual U16313EJ1V0UM
9
LIST OF TABLES
Figure No.
Title
Page
3-1
Pins of External Logic Probe Connector..........................................................................................................34
3-2
Electrical Characteristics of External Logic Probe Connector .........................................................................34
4-1
Factory Settings of Switches ...........................................................................................................................39
10
User’s Manual U16313EJ1V0UM
CHAPTER 1 OVERVIEW
The IE-V850ES-G1 is an in-circuit emulator that efficiently debugs hardware and software during the development
of systems that employ V850ES microcontrollers.
This in-circuit emulator incorporates functions such as a break/trace function using events, a coverage function for
program performance evaluation, and a timer/counter function.
To perform debugging, the emulation board (sold separately) corresponding to the relevant device must be
connected.
User’s Manual U16313EJ1V0UM
11
CHAPTER 1 OVERVIEW
1.1
Hardware Configuration
In-circuit emulator (IE-V850ES-G1)
Separately sold hardware
12
Emulation board
(IE-70xxxx-G1-EM1)
The IE-V850ES-G1 can be used as an in-circuit
emulator of each V850ES device by connecting this
board.
A probe cable is supplied with the board (except
some emulation boards).
Probe socket
(EV-70xxxxXXxx)
Deducated probe socket
PC interface board
IE-70000-CD-IF-A
IE-70000-PCI-IF-A
These boards are used to connect the IE-V850ESG1 to a personal computer. These boards are
added into the expansion slot of a personal
computer.
IE-70000-PCI-IF-A: For PCI bus
IE-70000-CD-IF-A: For PCMCIA socket
User’s Manual U16313EJ1V0UM
CHAPTER 1 OVERVIEW
1.2
Features
{ Maximum operating frequency: 20 MHz
{
A configuration that provides the highest possible equivalence with the target device is realized by omitting
buffers between signal lines.
{ The following pins can be masked (although these differ depending on the emulation board to be used).
RESET, NMI, WAIT, HLDRQ
{ The dimensions and environmental conditions for operation are as follows.
Parameter
Value
Maximum operating frequency
20 MHz
Supply voltage
AC 100 to 240 V
Power consumption
50 W (max.)
External dimensions
(Refer to APPENDIX A DIMENSIONS)
Height
210 mm
Width
105 mm
Depth
249 mm
Weight
2400 g
Operating temperature range
0 to 40°C
Storage temperature range
0 to 45°C
Ambient humidity range
10 to 80% RH
User’s Manual U16313EJ1V0UM
13
CHAPTER 1 OVERVIEW
1.3
Function Specifications
Item
Emulation memory capacity
Execution/pass detection coverage
memory capacity
Specification
Internal ROM
1 MB
External memory
4 MB
Internal ROM
1 MB
External memory
In ROMless mode
2 MB
When using iROM
1 MB
Trace memory capacity
168 bits × 32 Kframes
Time measurement function
Measurement enabled with time tag or
three timers
External logic probe
8-bit external trace possible
Trace/break event setting possible
Break function
Event break
Step execution break
Forced break
Fail safe break
• Illegal access to peripheral I/O
• Access to guard space
• Write into ROM space
Caution
14
Some of the functions may not be supported depending on the debugger used.
User’s Manual U16313EJ1V0UM
CHAPTER 1 OVERVIEW
1.4
Hardware Configuration
The basic hardware configuration of the IE-V850ES-G1 is as follows.
Figure 1-1. Basic Hardware Configuration
V850ES in-circuit emulator
IE-V850ES-G1 (emulator main unit)
Trace memory
iROM memory
Coverage memory
Emulation CPU
Host
machine
Emulation memory
CLK
Emulation board
I/O chip
OSC
Probe
Target system
User’s Manual U16313EJ1V0UM
15
CHAPTER 1 OVERVIEW
1.5
System Configuration
The system configuration when connecting the emulation board to the IE-V850ES-G1, which is then connected to
a personal computer (PC-9800 series, PC/AT
TM
or compatibles) is illustrated below.
Figure 1-2. System Configuration
<7>
<10>
[Magnified drawing: example of use of
connector for target connection]
<6>
<1>
<8>
<9>
Target
system
<11>
<2>
<12>
<8>
<4>
<5>
<3>
<9>
Target system
Remark
<1>
Personal computer (PC-9800 series, PC/AT or compatibles)
<2>
Debugger (sold separately), device file (available separately)
<3>
PC interface board
Note 1
(IE-70000-PCI-IF-A, IE-70000-CD-IF-A: Sold separately)
<4>
Two types of PC interface cables (included)
<5>
IE-V850ES-G1 (this product)
<6>
Emulation board (sold separately)
<7>
Prove cable
<8>
Conversion adapter
<9>
Target connector
Note 2
Note 2
Note 2
<10> Three types of power cables (included)
<11> External logic probe (included)
<12> External logic clip (included)
Notes 1. The device file can be downloaded from the website of NEC Electronics (http://www.necel.com/micro).
2. For the probe cable, conversion adapter, and target connector, refer to the user’s manual of the
emulation board.
16
User’s Manual U16313EJ1V0UM
CHAPTER 1 OVERVIEW
1.6
Contents in Carton
The carton of the IE-V850ES-G1 contains a main unit, guarantee card, packing list, and accessory bag.
Make sure that the accessory bag includes this manual and cables. In case of missing or damaged contents,
please contact an NEC Electronics sales representative or an NEC Electronics distributor.
Figure 1-3. Contents in Carton
<1> IE-V850ES-G1
<4> Packing list
<3> Guarantee card
<2> Accessory bag
<1> IE-V850ES-G1 × 1
<2> Accessory bag × 1
<3> Guarantee card × 1
<4> Packing list × 1
User’s Manual U16313EJ1V0UM
17
CHAPTER 1 OVERVIEW
Check that the accessory bag contains this manual, an accessory list, and the following accessories.
(a) PC interface cable (for PCI bus, for PCMCIA): × 1 each
(b) Power cable:
3 types, × 1 each
(c) External logic probe:
×1
(d) External logic clips:
1 set (10 clips)
Figure 1-4. Accessories
(a) PC interface cable
(for PCI bus, for PCMCIA)
(b) Power cable
(c) External logic prove
18
(d) External logic clips
User’s Manual U16313EJ1V0UM
CHAPTER 1 OVERVIEW
1.7
Setup
The following two system configurations for the IE-V850ES-G1 are possible, depending on the purpose.
This section describes the setup procedure according to each purpose as follows.
Step
Reference section
1.7.1 When using the emulator on a stand-alone basis for performing software debugging
(1)
Connect interface board to PC
3.1 Connection to Personal Computer
Before connecting, turn off the PC.
(2)
Connect emulation board
Refer to the user’s manual of the emulation board
(3)
Set operation clock of emulator
Refer to the user’s manual of the emulation board
(4)
Connect PC interface cable
3.4 Cable Connections
Connect cable.
(5)
Power up PC, then IE-V850ES-G1
3.5 System Power-on and Power-off
User’s Manual U16313EJ1V0UM
19
CHAPTER 1 OVERVIEW
1.7.2 When performing hardware debugging with target system
(1)
Connect interface board to PC
3.1 Connection to Personal Computer
Before connecting, turn off the PC.
(2)
Connect emulation board
Refer to the user’s manual of the emulation board
(3)
Set operation clock of emulator
Refer to the user’s manual of the emulation board
(4)
Connect PC interface cable
3.4 Cable Connections
Connect cable.
(5)
Connect IE-V850S-G1 to target system
3.2 Connection to Target System
(6)
Power up PC, then IE-V850ES-G1, then target
system
3.5 System Power-on and Power-off
Caution
Before turning on the power of the target system, make sure that the power of the IE-V850ESG1 is turned on. If the target system is turned on while the IE-V850ES-G1 is off, the target
system or the IE-V850ES-G1 may be damaged.
20
User’s Manual U16313EJ1V0UM
CHAPTER 2 PART NAMES AND FUNCTIONS
This chapter describes the name and function of each part of the IE-V850ES-G1, as well as switch settings.
2.1
Part Names and Functions of IE-V850ES-G1
Figure 2-1 Part Names and Functions of IE-V850ES-G1 on Front Side
TRGOUT signal connector
External logic probe connector
LEDs
Probe access
Ventilation
(1) LEDs
• Power (red): Turns on/off when the power switch is turned on/off.
ON: Lit
OFF: Off
• TARGET (amber): Indicates the status of the target power supply.
Power supplied to target: Lit
Power not supplied to target: Off
• STATUS (green): Indicates various statuses of the emulator.
Indication varies depending on the emulation board to be connected.
For details, refer to the user’s manual of the emulation board.
User’s Manual U16313EJ1V0UM
21
CHAPTER 2 PART NAMES AND FUNCTIONS
(2) External logic probe connector
Connect the external logic probe (included) to this connector.
(3) TRGOUT signal connector
This connector comprises the TRGOUT signal output and GND pins.
Figure 2-2. TRGOUT Signal Connector
GND pin
TRGOUT signal output pin
(open-drain output, 5 V tolerant)
22
User’s Manual U16313EJ1V0UM
CHAPTER 2 PART NAMES AND FUNCTIONS
Figure 2-3. Part Names and Functions of IE-V850ES-G1 on Back Side
Fan
Connector for PC interface
Power switch
Power cable jack
Fuse holder
Reset switch
(1) Power switch
This is the main power supply switch of the emulator.
I: ON
O: OFF
(2) Fuse holder
Set the fuse here.
Rating: 250 V, 3.15 A
(3) Power cable jack
Connect the power cable (included) here.
(4) Connector for PC interface
Connect the PC interface cable (included) here.
(5) Reset switch
This is the switch for resetting the IE-V850ES-G1.
User’s Manual U16313EJ1V0UM
23
CHAPTER 2 PART NAMES AND FUNCTIONS
Figure 2-4. Part Names and Functions of Board
CN2
CN3
˚PD703191
JP7
JP5
FPGA
JP4
JP3
FPGA
CN1
JP6
(1) Jumpers (JP3 to JP7)
Jumper setting is not required. Do not change the factory settings.
If the user’s manual of the emulation board describes the setting of JP3 to JP7 of the IE-V850ES-G1, follow the
setting described in the manual.
(2) Connectors for connecting emulation board (CN1 to CN3)
These connectors are for connecting the emulation board (sold separately).
2.2
Clock Settings
For the operation clock settings of the IE-V850ES-G1, refer to the user’s manual of each emulation board.
2.3
CPU Operating Voltage Range
For the CPU operating voltage range, refer to the user’s manual of each emulation board.
24
User’s Manual U16313EJ1V0UM
CHAPTER 2 PART NAMES AND FUNCTIONS
2.4
Cover Open/Close Procedure
2.4.1 Removing probe and replacing clock module
<1> Place your fingers at the positions indicated by the arrows below and pull front cover 1.
Figure 2-5. Cover Open/Close Procedure 1 (Removing Front Cover 1)
Front cover 1
User’s Manual U16313EJ1V0UM
25
CHAPTER 2 PART NAMES AND FUNCTIONS
<2> Remove the probe or change the clock in the status shown below.
Figure 2-6. Cover Open/Close Procedure 1 (After Front Cover 1 Is Removed)
Front cover 1
26
User’s Manual U16313EJ1V0UM
CHAPTER 2 PART NAMES AND FUNCTIONS
2.4.2 Replacing board
<1> Remove front cover 1 following the procedures described in 2.4.1 Removing probe and replacing clock
module.
<2> Loosen the two screws indicated by the arrows below.
Figure 2-7. Cover Open/Close Procedure 2 (Loosening Screws)
User’s Manual U16313EJ1V0UM
27
CHAPTER 2 PART NAMES AND FUNCTIONS
<3> Grip and pull up front cover 2 with the hinge installed on the rear panel as the center, and rotate the casing
main unit as shown.
Figure 2-8. Cover Open/Close Procedure 2 (Pulling up Front Cover 2)
Front cover 2
28
User’s Manual U16313EJ1V0UM
CHAPTER 2 PART NAMES AND FUNCTIONS
<4> Remove the six screws on the board indicated by the arrows and replace the board.
For replacement of the emulation board, refer to the user’s manual of each emulation board.
Figure 2-9. Cover Open/Close Procedure 2 (After Front Cover Is Pulled up)
2.4.3 Closing cover
Close the cover in the reverse procedure as that used when opening the cover.
User’s Manual U16313EJ1V0UM
29
CHAPTER 3 CONNECTION OF COMPONENTS
The IE-V850ES-G1 enables debugging and programming of target devices by connecting several components
and configuring the desired system.
This chapter describes the various components and their connection. Read this chapter when connecting system
components. For the sequence of system configuration, refer to 1.7 Setup.
For the details on software startup, refer to the user’s manual of the debugger that is used.
3.1
Connection to Personal Computer
3.1.1 Overview of connection
The IE-V850ES-G1 can use a personal computer (PC-9800 series, or PC/AT compatible) as the host machine.
The connection to each type of personal computer is described below.
(1) Desktop PC
When using a desktop PC, insert the following PC interface board in the external expansion slot of the desktop
PC and connect the computer to the IE-V850ES-G1.
• IE-70000-PCI-IF-A: For PCI bus (can also be used in a PC98-NX series, PC/AT or compatible)
(2) Notebook-type personal computer
When using a notebook-type personal computer, insert the interface card (IE-70000-CD-IF-A: Sold separately) in
the PC card slot of the computer and connect the computer to the IE-V850ES-G1.
3.1.2 Connection procedure
(1) Powering off
Perform connection while the power of each unit is off.
Before connecting, turn off the power of the IE-V850ES-G1 and the PC.
(2) PC interface board setting
When the IE-70000-PCI-IF-A is shipped, an 8-bit connector board is premounted. However, when the IEV850ES-G1 is connected, this must be changed to a 32-bit connector board.
The 32-bit connector board is supplied with the IE-70000-PCI-IF-A. For details, refer to the IE-70000-PCI-IF-A
User’s Manual.
30
User’s Manual U16313EJ1V0UM
CHAPTER 3 CONNECTION OF COMPONENTS
3.1.3 Insertion of PC interface board
The following describes the settings and connection of an IBM PC/AT (including its compatibles) and the IE70000-PCI-IF-A.
Figures 3-1 and 3-2 show how to mount the PC interface board.
<1> Before starting, turn off the power of the PC.
<2> Remove the casing of the PC.
<3> Remove the cover of the PCI bus slot.
Figure 3-1. Rear View of PC
Remove the cover
<4> Insert the PC interface board.
<5> Fix the PC interface board by fastening the screws.
Figure 3-2. Inserting PC Interface Board
Fasten the screws
<6> Replace the casing of the PC.
User’s Manual U16313EJ1V0UM
31
CHAPTER 3 CONNECTION OF COMPONENTS
3.1.4 Connection of PC interface cable
Figure 3-3 shows how to connect the PC interface cable.
Connect the PC interface cable (for PCI bus) supplied with the IE-V850ES-G1 to the PC interface connector of the
PC interface board.
Figure 3-3. Connection of PC Interface Board and PC Interface Cable
PC interface connector
PC interface cable
32
User’s Manual U16313EJ1V0UM
CHAPTER 3 CONNECTION OF COMPONENTS
3.2
Connection to Target System
For how to connect the IE-V850ES-G1 and target system, refer to the user’s manual of the emulation board.
3.3
Connection of External Logic Probe
When using the external logic probe, connect it to the external logic probe connector of the IE-V850ES-G1.
Connect the external logic clips to the tips of the external logic probe.
Figure 3-4. Connection of External Logic Probe
External logic clip
External logic probe
External logic probe connector
User’s Manual U16313EJ1V0UM
33
CHAPTER 3 CONNECTION OF COMPONENTS
Figure 3-5. External Logic Probe Connector Pins
<1>
·
·
·
·
·
·
<10>
Table 3-1. Pins of External Logic Probe Connector
Pin No.
<1>
<2>
<3>
<4>
<5>
<6>
<7>
<8>
Description
Bit 0
Bit 1
Bit 2
Bit 3
Bit 4
Bit 5
Bit 6
Bit 7
<9>
No connection
Table 3-2. Electrical Characteristics of External Logic Probe Connector
34
Parameter
Min. [V]
Max. [V]
Input voltage, high
Target voltage × 0.7
Target voltage
Input voltage, low
0
Target voltage × 0.3
User’s Manual U16313EJ1V0UM
<10>
GND
CHAPTER 3 CONNECTION OF COMPONENTS
3.4
Cable Connections
3.4.1 Connection of power supply cable
Connect the connector of the power supply cable (included) to the power supply cable jack on the main unit of the
IE-V850ES-G1.
Figure 3-6. Connection of Power Supply Cable
Power switch
Power supply cable jack
Power supply cable (included)
User’s Manual U16313EJ1V0UM
35
CHAPTER 3 CONNECTION OF COMPONENTS
3.4.2 PC interface cable connection
Connect the PC interface cable to the PC interface connector of the IE-V850ES-G1.
Figure 3-7. PC Interface Cable Connection
PC interface
connector
PC interface cable
(included)
36
User’s Manual U16313EJ1V0UM
CHAPTER 3 CONNECTION OF COMPONENTS
3.4.3 External logic probe connection
When using the external logic probe, connect it to the external logic probe connector.
For details, refer to the emulation board user’s manual.
3.4.4 Additional information
The IE-V850ES-G1 can perform real-time tracing of the emulation CPU bus cycle. For details of this function,
refer to the debugger user’s manual.
(1) Any eight signals can be traced in real-time.
(2) Tracer start/stop is enabled using any eight signals.
(3) Break setting is enabled using any eight signals.
Cautions 1. Connect the external logic probe only to a TTL-level signal line. High level and low level
cannot be detected correctly if connected to lines other than TTL-level signal lines. Note that
the sensor of the IE-V850ES-G1 and emulation board may be damaged by an excessive
voltage level.
2. When connecting the external logic probe, use the included external logic clips.
Procedure
(1) Turn off the power of the target system.
(2) Turn off the power of the IE-V850ES-G1.
(3) Connect the external logic probe to any device on the target system.
(4) Connect the GND of the external logic probe to the GND of the target system.
User’s Manual U16313EJ1V0UM
37
CHAPTER 3 CONNECTION OF COMPONENTS
3.5
System Power-on and Power-off
After connecting the IE-V850ES-G1 and each system component (PC, target system, etc.), start up and shut down
the system using the following procedure.
3.5.1 Power-on procedure
Cautions 1. Make sure that the IE-V850ES-G1 is correctly connected to the PC.
2. If the IE-V850ES-G1 is powered on or the system is terminated using a procedure other than
the following, the IE-V850ES-G1 or the target system may be damaged.
(1) Turn on the power switch of the PC.
(2) Turn on the power switch of the IE-V850ES-G1.
Set the power switch to “ON” after connecting the power cable to the power jack of the IE-V850ES-G1 and the
plug to the power outlet.
(3) Turn on the power of the target system.
(4) Start the debugger.
3.5.2 Power-off procedure
(1) Terminate the debugger.
(2) Turn off the power switch of the target system.
(3) Turn off the power switch of the IE-V850ES-G1.
(4) Turn off the power switch of the PC.
38
User’s Manual U16313EJ1V0UM
CHAPTER 4 FACTORY SETTINGS
This chapter describes the switch settings when the product is shipped.
4.1
Factory Settings
Table 4-1. Factory Settings of Switches
Setting
Description
Power switch
OFF
Power off
Jumper (JP3)
Shorted
Leave the setting.
Jumper (JP4)
Open
Leave the setting.
Jumper (JP5)
Shorted
Leave the setting.
Jumper (JP6)
Shorted
Leave the setting.
Jumper (JP7)
Open
Leave the setting.
User’s Manual U16313EJ1V0UM
39
APPENDIX A DIMENSIONS
18
249
108.6
40
User’s Manual U16313EJ1V0UM
3.6
105
231.6
210
3.6