LSI7002XP Fibre Channel: Single, Dual, & Quad PCI-X Host Adapters KEY APPLICATIONS • Storage Area Networks (SANs) • Server to storage interconnect • SAN clustering FEATURES • 64 bit/133 MHz PCI-X architecture • PCI 2.2 compliant • One, two, or four independent full duplex 2 Gbit/s ports – Up to 400 MBps throughput • Auto negotiation of Fibre Channel bit rate (1 or 2Gbit/s) • Supports all FC topologies • Supports Fibre Channel Class 2 and 3 service • SNIA HBA API compliant MAXIMIZE YOUR THROUGHPUT WITH LSI LOGIC’S INDUSTRY LEADING PCI-X, 2 GBIT/S FIBRE CHANNEL ADAPTERS Designed for data mining, video and media streaming, and high availability applications, LSI Logic’s family of PCI-X, 64-bit, 133 MHz Fibre channel host adapters provides industry-leading 2 Gbit/s Fibre Channel performance for high band-width applications and offers total bus throughput. LSI Logic’s LSI7402XP quad port PCI-X host adapter incorporates two LSIFC929X dual channel 2Gbit/s Fibre Channel controller devices, and a 133 MHz PCI-X bridge chip. LSI Logic’s LSIFC929X, the highest performance dual channel controller available, incorporates LSI Logic’s Fusion-MPT architecture for maximum performance with minimum host overhead. The LSI7402XP maximizes your only PCI-X slot and offers increased connectivity by offering four independent fibre channels on one host bus adapter. LSI Logic also offers the LSI7202XP dual channel, 2Gbit/s PCI-X host adapter and the LSI7102XP single channel, 2Gbit/s PCI-X host adapter. Both host bus adapters are designed in the Low Profile PCI form factor making them the right choice for 1U and 2U rackmount and standard servers. LSI Logic’s PCI-X host adapter family supports switched fabric, arbitrated loop and point to point topologies. Drivers for all major operating systems are available at http://www.storageio.lsilogic.com. Connectors • LC, multi-mode, SFP FUSION-MPT ARCHITECTURE ® Driver Support • Windows NT & 2000, Solaris X86 & SPARC, Netware, and Linux Visual Indicators • Single multicolor LED per channel – Link Based on industry standard ARM technology, the LSI Logic 2 Gbit product family incorporates Fusion-MPT architecture, a single binary device driver for Fibre Channel, SCSI and emerging interface technologies such as InfiniBand, Serial ATA and others. Thinner drivers allow for better and more versatile performance while adding value at the firmware level. Fusion-MPT provides the flexibility and rich feature set to make options like Integrated Mirroring possible for boot volume protection at no additional cost. L S I 7 0 0 2 X P FA M I LY O R D E R I N G I N F O R M AT I O N – Activity LSI7402XP-LC Quad port, LC, SFP, multi-mode optics – Fault LSI7202XP-LC Dual port, LC, SFP, multi-mode optics LSI7102XP-LC Single port, LC SFP, multi-mode optics LSI7002XP Fibre Channel: Single, Dual, & Quad PCI-X Host Adapters For more information please visit the LSI Logic web site at: Serial NVRAM Optical Interface SFP Optical Interface SFP Flash 1 MB http://storageio.lsilogic.com LSI Logic Corporation North American Headquarters LSIFC929X Fibre Channel Protocol Chip SSRAM 1 MB Milpitas, CA Tel: 866 574 5741 Host Adapter Group Southborough, MA Tel: 888 429 0425 LSI Logic’s dual channel native PCI-X host adapter block diagram. FAX: 508 485 0303 LSI Logic Europe Ltd. Technical Specifications European Headquarters Data Transfers 400 MBps per channel, full-duplex Protocols SCSI, IP Topology Point-to-point, arbitrated loop, switched fabric (FL-port, F-port) Tel: 44 1344 426544 Class of Service Class 2, Class 3 Fax: 44 1344 481039 Compliance ANSI Fibre Channel Standards: FC-PH, FC-AL2, FC-FCP, FC-PLDA, FC-FLA, FCA-IP, IETF-IPFC, FC-Tape PCI 2.2 and 99 compliant LSI Logic KK Headquarters Size 6.875” x 4.2”: LSI7402XP 6.6” x 2.53”: LSI7102XP and LSI7202XP Tel: 81 3 5463 7165 PCI Form Factor Short card PCI 2.2: LSI7402XP Low profile PCI2.2: MD2, LSI7102XP and LSI7202XP PCI Bus 64-bit, 133 MHz max (backwards compatible with 32-bit, 66 MHz buses) PCI Modes Bus Master DMA PCI Card Types 3.3 V signaling United Kingdom Tokyo, Japan Fax 81 3 5463 7820 ISO 9001 Certified The LSI Logic logo design and Fusion-MPT are trademarks or registered trademarks of LSI Logic Corporation. All other brand and product names may be trademarks of their respective companies. PCI Voltage 3.3 V ±5% PCI Power 15 W/7.5 W (depending on board type) Bracket Standard height External Connectors LC, multi-mode optics, SFP Agency Approvals CE, VCCI, Canada, C-Tick, FCC class B, UL 94VO Environments Operating Temperature 0°C to 55°C -40°C to +105°C Relative Humidity 5 to 90% non-condensing 5 to 90% non-condensing Max Dew Point +32°C Storage LSI Logic Corporation reserves the right to make changes to any products and services herein at any time without notice. LSI Logic does not assume any responsibility or liability arising out of the application or use of any product or service described herein, except as expressly agreed to in writing by LSI Logic; nor does the purchase, lease, or use of a product or service from LSI Logic convey a license under any patent rights, copyrights, trademark rights, or any other of the intellectual property rights of LSI Logic or of third parties. Copyright ©2002 by LSI Logic Corporation. All rights reserved. Order No. S20099 02/02-1M – Printed in USA 2