NUF2101W1T1 Advance Information USB Filter with ESD Protection This device is designed for applications requiring Line Termination, EMI Filtering and ESD Protection. It is intended for use in downstream USB 1.1 ports, Cellular phones, Wireless equipment and computer applications. This device offers an integrated solution in a small package (SC-88, Case 419B) reducing PCB space and cost. Features: • Provides USB Line Termination, Filtering and ESD Protection • Single IC Offers Cost Savings by Replacing 4 Resistors, • • • 2 Capacitors, and 5 TVs diodes Bi-directional EMI Filtering Prevents Noise from Entering/Leaving the System IEC61000-4-2 ESD Protection for USB Port ESD Ratings: Machine Model = C ESD Ratings: Human Body Model = 3B http://onsemi.com SCHEMATIC RS D+OUT D+IN 1 6 15 k VBUS 2 5 15 k D- IN D- OUT 4 3 Benefits: • SC-88 Package Minimizes PCB Space • Integrated Circuit Increases System Reliability versus Discrete • Component Implementation TVs Devices Provide ESD Protection That is Better than a Discrete Implementation because the Small IC minimizes Parasitic Inductances D+OUT PD 225 mW GND TJ(max) 125 °C Operating Temperature Range TJ -55 to +125 °C Storage Temperature Range Tstg -55 to +125 °C Lead Solder Temperature (10 second duration) TL 260 °C This document contains information on a new product. Specifications and information herein are subject to change without notice. Semiconductor Components Industries, LLC, 2003 1 2 3 D- OUT TBD d TBD d Unit February, 2003 - Rev. 0 6 1 Value Maximum Junction Temperature 3 PINOUT AND MARKING DIAGRAM Symbol Steady State Power 2 SC-88 CASE 419B PLASTIC MAXIMUM RATINGS (TA = 25°C) Rating 4 1 Typical Applications: • USB Hubs • Computer Motherboards 5 6 5 4 D+IN VBUS D- IN = Specific Device Code = Date Code ORDERING INFORMATION Device Package Shipping NUF2101W1T1 SC-88 3000/Tape & Reel Publication Order Number: NUF2101W1T1/D NUF2101W1T1 ELECTRICAL CHARACTERISTICS (TA = 25°C) Device Device Marking VRWM (Volts) Min Max Max IR @ VRWM = 5.25 V VBUS to GND (A) NUF2101W1T1 TBD 5.25 6.0 8.0 5.0 VBR @ 1 mA (Volts) Pull-down Resistor Rpd (k) Max IR @ VRWM = 3.3 V VBUS Pin (A) Typical Line Capacitance (pF) (Notes 2, 3) Min Nom Max Min Nom Max 1.0 50 27 30 33 13.5 15 16.5 Series Resistor RS () (Note 1) 1. For other RS values (i.e. RS = 30 ) contact your local ON Semiconductor sales representative. 2. Measured at 25°C, VR = 0 V, f = 1 MHz, Pins 2, 3, 4 or 5 to GND with Pin 1 also grounded. 3. For other capacitance values contact your local ON Semiconductor sales representative. TYPICAL CHARACTERISTICS 10 50 0 40 -10 -20 30 P = -25 dBm Vdc = 0 V 10 (dB) (dB) -30 -40 0 -50 -10 -60 -20 -70 -30 -80 -40 -90 P = -25 dBm Vdc = 0 V 20 0.1 1 10 (MHz) 100 -50 1000 Figure 1. Analog Cross-talk (D+ to D-) 0.1 1 10 (MHz) 100 Figure 2. Insertion Loss Characteristics http://onsemi.com 2 1000 NUF2101W1T1 OUTLINE DIMENSIONS USB Filter with ESD Protection SC-88 CASE 419B-02 ISSUE N NOTES: 1. DIMENSIONING AND TOLERANCING PER ANSI Y14.5M, 1982. 2. CONTROLLING DIMENSION: INCH. 3. 419B-01 OBSOLETE, NEW STANDARD 419B-02. A G 6 5 4 1 2 3 DIM A B C D G H J K N S -B- S D 6 PL 0.2 (0.008) M B M N J C H K http://onsemi.com 3 INCHES MIN MAX 0.071 0.087 0.045 0.053 0.031 0.043 0.004 0.012 0.026 BSC --0.004 0.004 0.010 0.004 0.012 0.008 REF 0.079 0.087 MILLIMETERS MIN MAX 1.80 2.20 1.15 1.35 0.80 1.10 0.10 0.30 0.65 BSC --0.10 0.10 0.25 0.10 0.30 0.20 REF 2.00 2.20 NUF2101W1T1 ON Semiconductor and are registered trademarks of Semiconductor Components Industries, LLC (SCILLC). SCILLC reserves the right to make changes without further notice to any products herein. SCILLC makes no warranty, representation or guarantee regarding the suitability of its products for any particular purpose, nor does SCILLC assume any liability arising out of the application or use of any product or circuit, and specifically disclaims any and all liability, including without limitation special, consequential or incidental damages. “Typical” parameters which may be provided in SCILLC data sheets and/or specifications can and do vary in different applications and actual performance may vary over time. All operating parameters, including “Typicals” must be validated for each customer application by customer’s technical experts. SCILLC does not convey any license under its patent rights nor the rights of others. SCILLC products are not designed, intended, or authorized for use as components in systems intended for surgical implant into the body, or other applications intended to support or sustain life, or for any other application in which the failure of the SCILLC product could create a situation where personal injury or death may occur. Should Buyer purchase or use SCILLC products for any such unintended or unauthorized application, Buyer shall indemnify and hold SCILLC and its officers, employees, subsidiaries, affiliates, and distributors harmless against all claims, costs, damages, and expenses, and reasonable attorney fees arising out of, directly or indirectly, any claim of personal injury or death associated with such unintended or unauthorized use, even if such claim alleges that SCILLC was negligent regarding the design or manufacture of the part. SCILLC is an Equal Opportunity/Affirmative Action Employer. PUBLICATION ORDERING INFORMATION Literature Fulfillment: Literature Distribution Center for ON Semiconductor P.O. Box 5163, Denver, Colorado 80217 USA Phone: 303-675-2175 or 800-344-3860 Toll Free USA/Canada Fax: 303-675-2176 or 800-344-3867 Toll Free USA/Canada Email: [email protected] JAPAN: ON Semiconductor, Japan Customer Focus Center 2-9-1 Kamimeguro, Meguro-ku, Tokyo, Japan 153-0051 Phone: 81-3-5773-3850 Email: [email protected] ON Semiconductor Website: http://onsemi.com For additional information, please contact your local Sales Representative. N. American Technical Support: 800-282-9855 Toll Free USA/Canada http://onsemi.com 4 NUF2101W1T1/D