P6KE200B 600 Watt Peak Power Transient Voltage Suppressors Unidirectional* The P6KE200B is designed to protect voltage sensitive components from high voltage, high energy transients. They have excellent clamping capability, high surge capability, low zener impedance and fast response time. These devices are ON Semiconductor’s exclusive, cost-effective, highly reliable Surmetic axial leaded package and is ideally-suited for use in communication systems, numerical controls, process controls, medical equipment, business machines, power supplies and many other industrial/consumer applications. http://onsemi.com Cathode Anode Specification Features: • • • • • • • • Working Peak Reverse Voltage Range – 171 V Peak Power – 600 Watts @ 1.0 ms ESD Rating of Class 3 (>16 KV) per Human Body Model Maximum Clamp Voltage @ Peak Pulse Current Low Leakage < 5.0 µA above 171 V Maximum Temperature Coefficient Specified UL 497B for Isolated Loop Circuit Protection Response Time is typically < 1.0 ns AXIAL LEAD CASE 59–09 PLASTIC Mechanical Characteristics: CASE: Void-free, Transfer-molded, Thermosetting plastic FINISH: All external surfaces are corrosion resistant and leads are L P6KE 200B YYWW readily solderable MAXIMUM LEAD TEMPERATURE FOR SOLDERING: 230C, 1/16″ from the case for 10 seconds POLARITY: Cathode indicated by polarity band MOUNTING POSITION: Any L = Assembly Location P6KE200B = Device Code YY = Year WW = Work Week MAXIMUM RATINGS Rating Symbol Value Unit Peak Power Dissipation (Note 1) @ TL ≤ 25°C PPK 600 Watts Steady State Power Dissipation @ TL ≤ 75°C, Lead Length = 3/8″ Derated above TL = 75°C PD 5.0 Watts 50 mW/°C Thermal Resistance, Junction–to–Lead RJL 15 °C/W Forward Surge Current (Note 2) @ TA = 25°C IFSM 100 Amps TJ, Tstg – 55 to +150 °C Operating and Storage Temperature Range ORDERING INFORMATION Device Package Shipping P6KE200B Axial Lead 1000 Units/Box P6KE200BRL Axial Lead 5000 Tape & Reel 1. Nonrepetitive current pulse per Figure 3 and derated above TA = 25°C per Figure 2. 2. 1/2 sine wave (or equivalent square wave), PW = 8.3 ms, duty cycle = 4 pulses per minute maximum. Semiconductor Components Industries, LLC, 2002 January, 2002 – Rev. 0 1 Publication Order Number: P6KE200B/D P6KE200B ELECTRICAL CHARACTERISTICS (TA = 25°C unless I otherwise noted, VF = 3.5 V Max. @ IF (Note 6) = 50 A) Symbol IPP Maximum Reverse Peak Pulse Current VC Clamping Voltage @ IPP VRWM IR VBR IT VBR IF Parameter VC VBR VRWM Working Peak Reverse Voltage V IR VF IT Maximum Reverse Leakage Current @ VRWM Breakdown Voltage @ IT Test Current Maximum Temperature Coefficient of VBR IF Forward Current VF Forward Voltage @ IF IPP Uni–Directional TVS ELECTRICAL CHARACTERISTICS (TA = 25°C unless otherwise noted, VF = 3.5 V Max. @ IF (Note 6) = 50 A) Device Device Marking P6KE200B P6KE200B Breakdown Voltage VRWM (Note 3) IR @ VRWM Volts µA Min Nom 171 5 190 200 VBR (Note 4) (Volts) VC @ IPP (Note 5) IPP VBR @ IT VC Max mA Volts A %/°C 210 1 274 2.2 0.108 3. A transient suppressor is normally selected according to the maximum working peak reverse voltage (VRWM), which should be equal to or greater than the dc or continuous peak operating voltage level. 4. VBR measured at pulse test current IT at an ambient temperature of 25°C. 5. Surge current waveform per Figure 3 and derate per Figures 1 and 2. 6. 1/2 sine wave (or equivalent square wave), PW = 8.3 ms, duty cycle = 4 pulses per minute maximum. http://onsemi.com 2 PPK , PEAK POWER (kW) 100 NONREPETITIVE PULSE WAVEFORM SHOWN IN FIGURE 3 10 1 0.1 0.1 µs 1 µs 10 µs 100 µs 1 ms PEAK PULSE DERATING IN % OF PEAK POWER OR CURRENT @ TA = 25 C P6KE200B 10 ms 100 80 60 40 20 0 0 25 50 PEAK VALUE – IPP VALUE (%) HALF VALUE – PULSE WIDTH (tp) IS DEFINED AS THAT POINT WHERE THE PEAK CURRENT DECAYS TO 50% OF IPP. IPP 2 50 tP 0 0 1 2 3 t, TIME (ms) 200 Figure 2. Pulse Derating Curve PD, STEADY STATE POWER DISSIPATION (WATTS) Figure 1. Pulse Rating Curve 100 100 125 150 175 TA, AMBIENT TEMPERATURE (C) tP, PULSE WIDTH tr ≤ 10 µs 75 4 3/8″ 3/8″ 5 4 3 2 1 0 Figure 3. Pulse Waveform 0 25 50 75 100 125 150 175 TL, LEAD TEMPERATURE C) 200 Figure 4. Steady State Power Derating http://onsemi.com 3 P6KE200B OUTLINE DIMENSIONS Transient Voltage Suppressors – Axial Leaded 600 Watt Peak Power AXIAL LEAD CASE 59–09 ISSUE R NOTES: 1. DIMENSIONING AND TOLERANCING PER ANSI Y14.5M, 1982. 2. CONTROLLING DIMENSION: INCH. 3. 59-04 OBSOLETE, NEW STANDARD 59-09. 4. 59-03 OBSOLETE, NEW STANDARD 59-10. 5. ALL RULES AND NOTES ASSOCIATED WITH JEDEC DO-41 OUTLINE SHALL APPLY. 6. POLARITY DENOTED BY CATHODE BAND. 7. LEAD DIAMETER NOT CONTROLLED WITHIN F DIMENSION. B K D DIM A B D K A INCHES MIN MAX 0.228 0.299 0.102 0.142 0.028 0.034 1.000 --- MILLIMETERS MIN MAX 5.80 7.60 2.60 3.60 0.71 0.86 25.44 --- K ON Semiconductor and are trademarks of Semiconductor Components Industries, LLC (SCILLC). SCILLC reserves the right to make changes without further notice to any products herein. SCILLC makes no warranty, representation or guarantee regarding the suitability of its products for any particular purpose, nor does SCILLC assume any liability arising out of the application or use of any product or circuit, and specifically disclaims any and all liability, including without limitation special, consequential or incidental damages. “Typical” parameters which may be provided in SCILLC data sheets and/or specifications can and do vary in different applications and actual performance may vary over time. All operating parameters, including “Typicals” must be validated for each customer application by customer’s technical experts. SCILLC does not convey any license under its patent rights nor the rights of others. SCILLC products are not designed, intended, or authorized for use as components in systems intended for surgical implant into the body, or other applications intended to support or sustain life, or for any other application in which the failure of the SCILLC product could create a situation where personal injury or death may occur. Should Buyer purchase or use SCILLC products for any such unintended or unauthorized application, Buyer shall indemnify and hold SCILLC and its officers, employees, subsidiaries, affiliates, and distributors harmless against all claims, costs, damages, and expenses, and reasonable attorney fees arising out of, directly or indirectly, any claim of personal injury or death associated with such unintended or unauthorized use, even if such claim alleges that SCILLC was negligent regarding the design or manufacture of the part. SCILLC is an Equal Opportunity/Affirmative Action Employer. PUBLICATION ORDERING INFORMATION Literature Fulfillment: Literature Distribution Center for ON Semiconductor P.O. Box 5163, Denver, Colorado 80217 USA Phone: 303–675–2175 or 800–344–3860 Toll Free USA/Canada Fax: 303–675–2176 or 800–344–3867 Toll Free USA/Canada Email: [email protected] JAPAN: ON Semiconductor, Japan Customer Focus Center 4–32–1 Nishi–Gotanda, Shinagawa–ku, Tokyo, Japan 141–0031 Phone: 81–3–5740–2700 Email: [email protected] ON Semiconductor Website: http://onsemi.com For additional information, please contact your local Sales Representative. N. American Technical Support: 800–282–9855 Toll Free USA/Canada http://onsemi.com 4 P6KE200B/D