ETC 260019

DISCRETE LEDs - Ø 5mm Ultra-Violet
Cathode
0.4
1.0
Wide viewing angle
•
Also available in ball
lens style
(part no 260018)
Anode
370nm peak
wavelength
Ø 5.4
Ø 4.7
Ø 4.0
1.0
14.5 ± 0.5
•
•
Ø 0.5
(2.5)
260019 SERIES
Cathode
3.6± 0.4
MLQ = 50
Dimensions in mm (Typical)
Tolerance +/- 0.2 UOS
Not to Scale
Ordering Information & Typical Technical Characteristics (Ta = 25°C)
Mean Time Between Failure = 100,000 Hours. * Duty Cycle <=1/10, Pulse Width <= 10msec
PART NUMBER
COLOUR
TYP. FWD
VOLTAGE
Vf @ Iopr
MAX FWD
VOLTAGE
Vf @ Iopr
FORWARD
CURRENT
lopr
MAX REV
CURRENT
I r(Vr =5V)
OPTICAL
POWER
Po
SPECTRUM
HALF WIDTH
∆λ
VIEWING
ANGLE
2θ 1/2
STANDARD INTENSITY
OPTICAL / ELECTRICAL CHARACTERISTICS (Ta = 25 oC)
-
260019
Ultra-Violet
3.9
UNITS
Water Clear
V
PART NUMBER
COLOUR
FORWARD
CURRENT
Iopr max
10
85
1
12
110
V
mA
µA
mW
nm
deg
PEAK FWD
CURRENT
I fp
*
REVERSE
VOLTAGE
Vr max
POWER
DISSIPATION
P dmax
PEAK
WAVELENGTH
Typ. λp
OPERATING
TEMP
T opr
STORAGE
TEMP
T stg
STANDARD INTENSITY
ABSOLUTE MAXIMUM- RATINGS (Ta = 25oC)
260019
Ultra-Violet
15
30
UNITS
Water Clear
mA
mA
Vdc
60
370
-30 to +80
-40 to +100
mW
nm
°C
°C
PRECAUTIONS FOR HANDLING ELECTROSTATIC SENSITIVE LEDs
Static Electricity and Surge
Static electricity and surge will damage the LED and a high standard of care must be taken during handling. It is recommended that a wristband, conductive mat or
anti-electrostatic glove is used when handling the LEDs. All devices, equipment (e.g. soldering iron points) and machinery must be properly grounded.
SAFETY PRECAUTIONS FOR HANDLING HIGH BRIGHTNESS LEDs
Invisible Laser Radiation : Avoid direct eye exposure to UV light
Please refer to European Standard BSEN 100015-1 1992
for further information.
© Marl Optosource 2000
Datasheet Reference 30/99 Issue 02
Marl Optosource • Fax: +44 (0)1229 580012 •
email: [email protected]
•
website: www.optosource.com
• Telephone +44 (0)1229 582430