PhotoMOS RELAYS RF (Radio Frequency) Type [1-Channel (Form A) Type] FEATURES 1. High frequency characteristics with low capacitance between output terminals Low capacitance: Typ. 5 pF (between output terminals) Isolation loss: 40 dB or more (at 1 MHz) 2. High sensitivity, high speed response Controls load current of 0.12 A (max.), with input current of 5 mA. Operate time is 100 µs (Typical) 3. Low-level off state leakage current PhotoMOS AQV22❍ types exhibit an OFF state leakage current in the order of 100 picoamperes at a load voltage of 80 V compared with several milliamperes in solid-state relay. 6.4±0.05 .252±.002 8.8±0.05 .346±.002 3.9±0.2 .154±.008 6.4±0.05 .252±.002 3.6±0.2 .142±.008 8.8±0.05 .346±.002 mm inch 1 6 2 5 3 4 4. Controls low-level analog signals PhotoMOS relay features extremely low closed-circuit offset voltages to enable control of small analog signals without distortion. 5. Low terminal electromotive force (Approx. 1 mV) 6. Small LED voltage drop on input side (Max. 1.5 V) TYPICAL APPLICATIONS • Measuring devices Scanner, IC checker, Board tester • Audio visual equipment CD, VCR TYPES Output rating* Type Part No. Through hole terminal Packing quantity Surface-mount terminal Load voltage Load current 40 V 80 mA AQV221 AQV221A AQV221AX AQV221AZ 80 V 50 mA AQV225 AQV225A AQV225AX AQV225AZ Tape and reel packing style Picked from the Picked from the 1/2/3-pin side 4/5/6-pin side Tube packing style AC/DC type Tube Tape and reel 1 tube contains 50 pcs. 1 batch contains 500 pcs. 1,000 pcs *Indicate the peak AC and DC values. Note: For space reasons, the package type indicator "X" and "Z" are omitted from the seal. RATING 1. Absolute maximum ratings (Ambient temperature: 25°C 77°F) Item Input LED forward current LED reverse voltage Peak forward current Power dissipation Load voltage (Peak AC) Continuous load current Output Type of Symbol connection IF VR IFP Pin VL A IL B C AQV221(A) AQV225(A) 50 mA 3V 1A 75 mW f = 100 Hz, Duty factor = 0.1% 40 V 0.08 A 0.09 A 0.12 A 80 V 0.05 A 0.06 A 0.075 A 0.18 A 0.15 A Peak load current Ipeak Power dissipation Total power dissipation I/O isolation voltage Pout PT Viso 230 mW 280 mW 1,500 V AC Operating Topr –40°C to +85°C –40°F to +185°F Storage Tstg –40°C to +100°C –40°F to +212°F Temperature limits 134 Remarks A connection: Peak AC, DC B, C connection: DC A connection: 100 ms (1 shot), VL = DC Non-condensing at low temperatures