ETC HD74LV1GT04A

HD74LV1GT04A
Inverter
ADE-205-327E (Z)
6th. Edition
Jan. 2002
Description
The HD74LV1GT04A has an inverter in a 5 pin package. Low voltage and high speed operation is suitable
for the battery powered products (e.g., notebook computers), and the low power consumption extends the
battery life.
Features
• The basic gate function is lined up as hitachi uni logic series.
• Supplied on emboss taping for high speed automatic mounting.
• TTL compatible input level.
Supply voltage range : 4.5 to 5.5 V
Operating temperature range : –40 to +85°C
• All inputs VIH (Max.) = 5.5 V (@VCC = 0 V to 5.5 V)
All outputs VO (Max.) = 5.5 V (@VCC = 0 V)
• Output current ±12 mA (@VCC = 4.5 V to 5.5 V)
• All the logical input has hysteresis voltage for the slow transition.
• Package type
Package type
Package code
Package suffix
Taping code
CMPAK-5 pin
CMPAK-5
CM
E (3,000 pcs / Reel)
VSON-5 pin
TNP-5D
VS
E (3,000 pcs / Reel)
HD74LV1GT04A
Outline and Article Indication
• HD74LV1GT04A
Index band
Marking
T
5
= Control code
(
or blank)
CMPAK–5
• HD74LV1GT04A
Marking
T
VSON–5
Rev.5, Jan. 2002, page 2 of 9
5
= Control code
HD74LV1GT04A
Function Table
Input A
Output Y
H
L
L
H
H : High level
L : Low level
Pin Arrangement
NC
1
IN A
2
GND
3
5
VCC
4
OUT Y
(Top view)
Rev.5, Jan. 2002, page 3 of 9
HD74LV1GT04A
Absolute Maximum Ratings
Item
Supply voltage range
Input voltage range
*1
Output voltage range
*1, 2
Symbol
Ratings
Unit
VCC
–0.5 to 7.0
V
VI
–0.5 to 7.0
V
VO
–0.5 to VCC + 0.5
V
–0.5 to 7.0
Test Conditions
Output : H or L
VCC : OFF
Input clamp current
IIK
–20
mA
VI < 0
Output clamp current
IOK
±50
mA
VO < 0 or VO > VCC
Continuous output current
IO
±25
mA
VO = 0 to VCC
Continuous current through
VCC or GND
ICC or IGND
±50
mA
Maximum power dissipation
*3
at Ta = 25°C (in still air)
PT
200
mW
Storage temperature
Tstg
–65 to 150
°C
Notes:
The absolute maximum ratings are values which must not individually be exceeded, and
furthermore no two of which may be realized at the same time.
1. The input and output voltage ratings may be exceeded if the input and output clamp-current
ratings are observed.
2. This value is limited to 5.5 V maximum.
3. The maximum package power dissipation was calculated using a junction temperature of 150°C.
Recommended Operating Conditions
Item
Symbol
Min
Max
Unit
Supply voltage range
VCC
4.5
5.5
V
Input voltage range
VI
0
5.5
V
Output voltage range
VO
0
VCC
V
Output current
IOH
—
12
mA
VCC = 4.5 to 5.5 V
IOL
—
–12
mA
VCC = 4.5 to 5.5 V
VCC = 4.5 to 5.5 V
Input transition rise or fall rate ∆t / ∆v
0
20
ns / V
Operating free-air temperature Ta
–40
85
°C
Note: Unused or floating inputs must be held high or low.
Rev.5, Jan. 2002, page 4 of 9
Conditions
HD74LV1GT04A
Electrical Characteristic
• Ta = –40 to 85°C
Item
Symbol VCC (V) *
Min
Typ
Max
Unit Test condition
Input voltage
VIH
4.5 to 5.5
2.0
—
—
V
VIL
4.5 to 5.5
—
—
0.8
Hysteresis voltage VH
5.0
—
0.15
—
V
VT – VT
Output voltage
Min to Max
VCC–0.1
—
—
V
IOH = –50 µA
4.5
3.8
—
—
IOH = –12 mA
Min to Max
—
—
0.1
IOL = 50 µA
4.5
—
—
0.55
IOL = 12 mA
VOH
VOL
+
–
Input current
IIN
0 to 5.5
—
—
±1
µA
VIN = 5.5 V or GND
Quiescent
supply current
ICC
5.5
—
—
10
µA
VIN = VCC or GND,
IO = 0
∆ICC
5.5
—
—
1.5
mA
One input VIN = 3.4 V,
other input VCC or GND
IOFF
0
—
—
5
µA
VI or VO = 0 to 5.5 V
5.0
—
3.0
—
pF
VIN = VCC or GND
Output leakage
current
Input capacitance CIN
Note: For conditions shown as Min or Max, use the appropriate values under recommended operating
conditions.
Switching Characteristics
• VCC = 5.0 ± 0.5 V
Item
Symbol
Ta = 25°C
Ta = –40 to 85°C Unit Test
Min
Typ
Max
Min
Max
Propagation
tPLH
—
5.0
7.0
1.0
8.0
delay time
tPHL
—
8.0
10.5
1.0
12.0
ns
FROM
TO
Conditions (Input)
(Output)
CL = 15 pF
Y
A
CL = 50 pF
Operating Characteristics
• CL = 50 pF
Item
Power dissipation
capacitance
Symbol
CPD
VCC (V)
5.0
Ta = 25°C
Min
Typ
Max
—
10.0
—
Unit
Test Conditions
pF
f = 10 MHz
Rev.5, Jan. 2002, page 5 of 9
HD74LV1GT04A
Test Circuit
VCC
Output
Input
Pulse
generator
50 Ω
CL
Note: CL includes probe and jig capacitance.
• Waveforms
tr
tf
90%
Input
3V
90%
1.5 V
1.5 V
10%
10%
GND
VOH
50%
Output
50%
VOL
t PHL
t PLH
Notes: 1. Input waveform : PRR ≤ 1 MHz, Zo = 50 Ω, tr ≤ 3 ns, tf ≤ 3 ns.
2. The output are measured one at a time with one transition per measurement.
Rev.5, Jan. 2002, page 6 of 9
HD74LV1GT04A
Package Dimensions
As of July, 2001
(0.65)
1.25 ± 0.1
(0.65)
0 – 0.1
(0.2)
2.0 ± 0.2
0.9 ± 0.1
(0.425)
5 – 0.2 ± 0.05
+ 0.1
0.15– 0.05
2.1 ± 0.3
1.3 ± 0.2
(0.425)
Unit: mm
Hitachi Code
JEDEC
JEITA
Mass (reference value)
CMPAK-5(T)
—
Conforms
0.006 g
Rev.5, Jan. 2002, page 7 of 9
HD74LV1GT04A
1.6 ± 0.05
(0.1)
0.2
Unit: mm
0.5
+0.1
0.12 –0.05
1.0 ± 0.1
0.6 MAX
0.5
(0.1)
1.2 ± 0.1
0.2
1.6 ± 0.05
As of July, 2001
+0.1
5 – 0.2 –0.05
Hitachi Code
JEDEC
JEITA
Mass (reference value)
Rev.5, Jan. 2002, page 8 of 9
TNP-5D


0.002 g
HD74LV1GT04A
Disclaimer
1. Hitachi neither warrants nor grants licenses of any rights of Hitachi’s or any third party’s patent,
copyright, trademark, or other intellectual property rights for information contained in this document.
Hitachi bears no responsibility for problems that may arise with third party’s rights, including
intellectual property rights, in connection with use of the information contained in this document.
2. Products and product specifications may be subject to change without notice. Confirm that you have
received the latest product standards or specifications before final design, purchase or use.
3. Hitachi makes every attempt to ensure that its products are of high quality and reliability. However,
contact Hitachi’s sales office before using the product in an application that demands especially high
quality and reliability or where its failure or malfunction may directly threaten human life or cause risk
of bodily injury, such as aerospace, aeronautics, nuclear power, combustion control, transportation,
traffic, safety equipment or medical equipment for life support.
4. Design your application so that the product is used within the ranges guaranteed by Hitachi particularly
for maximum rating, operating supply voltage range, heat radiation characteristics, installation
conditions and other characteristics. Hitachi bears no responsibility for failure or damage when used
beyond the guaranteed ranges. Even within the guaranteed ranges, consider normally foreseeable
failure rates or failure modes in semiconductor devices and employ systemic measures such as failsafes, so that the equipment incorporating Hitachi product does not cause bodily injury, fire or other
consequential damage due to operation of the Hitachi product.
5. This product is not designed to be radiation resistant.
6. No one is permitted to reproduce or duplicate, in any form, the whole or part of this document without
written approval from Hitachi.
7. Contact Hitachi’s sales office for any questions regarding this document or Hitachi semiconductor
products.
Sales Offices
Hitachi, Ltd.
Semiconductor & Integrated Circuits
Nippon Bldg., 2-6-2, Ohte-machi, Chiyoda-ku, Tokyo 100-0004, Japan
Tel: (03) 3270-2111 Fax: (03) 3270-5109
URL
http://www.hitachisemiconductor.com/
For further information write to:
Hitachi Semiconductor
(America) Inc.
179 East Tasman Drive
San Jose,CA 95134
Tel: <1> (408) 433-1990
Fax: <1>(408) 433-0223
Hitachi Europe Ltd.
Electronic Components Group
Whitebrook Park
Lower Cookham Road
Maidenhead
Berkshire SL6 8YA, United Kingdom
Tel: <44> (1628) 585000
Fax: <44> (1628) 585200
Hitachi Asia Ltd.
Hitachi Tower
16 Collyer Quay #20-00
Singapore 049318
Tel : <65>-538-6533/538-8577
Fax : <65>-538-6933/538-3877
URL : http://semiconductor.hitachi.com.sg
Hitachi Europe GmbH
Electronic Components Group
Dornacher Straße 3
D-85622 Feldkirchen
Postfach 201, D-85619 Feldkirchen
Germany
Tel: <49> (89) 9 9180-0
Fax: <49> (89) 9 29 30 00
Hitachi Asia Ltd.
(Taipei Branch Office)
4/F, No. 167, Tun Hwa North Road
Hung-Kuo Building
Taipei (105), Taiwan
Tel : <886>-(2)-2718-3666
Fax : <886>-(2)-2718-8180
Telex : 23222 HAS-TP
URL : http://www.hitachi.com.tw
Hitachi Asia (Hong Kong) Ltd.
Group III (Electronic Components)
7/F., North Tower
World Finance Centre,
Harbour City, Canton Road
Tsim Sha Tsui, Kowloon Hong Kong
Tel : <852>-(2)-735-9218
Fax : <852>-(2)-730-0281
URL : http://semiconductor.hitachi.com.hk
Copyright © Hitachi, Ltd., 2002. All rights reserved. Printed in Japan.
Colophon 5.0
Rev.5, Jan. 2002, page 9 of 9