SURFACE MOUNT LED LAMP 0805 Chip Type - Water Clear PACKAGE DIMENSIONS 0.087 (2.2) 0.071 (1.8) Red Orange Yellow QTLP630C-R QTLP630C-E QTLP630C-Y Water Clear Water Clear Water Clear R0.008 (0.2) 0.057 (1.45) 0.041 (1.05) FEATURES TOP CATHODE MARK • Ultra-miniature and extremely low profile 0.012 (0.3) 2X 0.055 (1.4) • Industrial standard footprint • AlInGaP technology • Wide viewing angle of 140° 0.047 (1.2) 0.041 (1.05) • Water clear optics 0.024 (0.6) • Available in 0.42” (12mm) width SIDE tape on 7” (178mm) diameter. 0.016 (0.4) 2X • Moisture-proof packaging 0.047 (1.2) DESCRIPTION These surface mount lamps are designed to fit industry standard profile and footprint for ultra-miniature chip type 0805. The low profile and 140° viewing angle, moisture-proof packaging makes this chip type LED ideal for panel illumination, push-button backlighting and membrane switch applications. BOTTOM NOTE: Dimensions are in inches (mm). ABSOLUTE MAXIMUM RATINGS Parameter Continuous Forward Current - IF Peak Forward Current - IF (f = 1.0 KHz, Duty Factor = 1/10) (TA = 25°C unless otherwise specified) Red Orange Yellow QTLP630C-R QTLP630C-E QTLP630C-Y 30 30 20 mA 160 160 200 mA Units Reverse Voltage - VR (IR = 10 µA) 5 5 5 V Power Dissipation - PD 85 100 100 mW Operating Temperature - TOPR -40 to +100 °C Storage Temperature - TSTG -40 to +100 °C Wave 260 for 5 sec °C Reflow 260 for 10 sec Lead Soldering Time - TSOL 1 of 5 3/10/00 300043A SURFACE MOUNT LED LAMP Round Top (1206) Chip Type - Water Clear Red Orange Yellow ELECTRICAL / OPTICAL CHARACTERISTICS Part Number QTLP630C-R QTLP630C-E QTLP630C-Y Water Clear Water Clear Water Clear (TA =25°C) Red Orange Yellow QTLP630C-R QTLP630C-E QTLP630C-Y Condition Luminous Intensity (mcd) IF = 20mA Minimum 15 20 25 Typical 30 40 50 2.4 2.8 2.8 Forward Voltage (V) IF = 20mA Maximum Typical Peak Wavelength (nm) 1.9 2.1 2.1 630 620 590 IF = 20mA Spectral Line Half Width (nm) 20 18 15 IF = 20mA Viewing Angle (°) 140 140 140 IF = 20mA TYPICAL PERFORMANCE CURVES 100 2.5 RELATIVE LUMNOUS INTENSITY (NORMALIZED AT 20 mA) IF - FORWARD CURRENT (mA) 90 80 70 60 50 40 30 20 10 1.5 2.0 2.5 3.0 VF - FORWARD VOLTAGE (V) Fig. 1 Forward Current vs. Forward Voltage 2 of 5 1.5 1.0 0.5 0.0 0 1.0 2.0 0 10 20 30 40 50 IF - DC FORWARD CURRENT (mA) Fig. 2 Relative Luminous Intensity vs. DC Forward Current 3/10/00 300043A SURFACE MOUNT LED LAMP Round Top (1206) Chip Type - Water Clear Red Orange Yellow QTLP630C-R QTLP630C-E QTLP630C-Y Fig. 1 Forward Current vs. Forward Voltage TYPICAL PERFORMANCE CURVES Water Clear Water Clear Water Clear Fig. 2 Relative Luminous Intensity vs. DC Forward Current 0˚ 10˚ 20˚ RELATIVE INTENSITY 1.0 YELLOW ORANGE 30˚ RED 40˚ 1.0 0.5 0.9 50˚ 0.8 60˚ 70˚ 0.7 80˚ 90˚ 0 550 600 650 0.5 700 WAVELENGTH - nm 0.3 0.1 0.2 0.4 0.6 REL. LUMINOUS INTENSITY (%) Fig. 4 Radiation Diagram Fig. 3 Relative Intensity vs Peak Wavelength IF - FORWARD CURRENT (mA) 50 40 RED, ORANGE 30 YELLOW 20 10 0 -25 0 25 50 75 80 100 AMBIENT TEMPERATURE TA (˚C) Fig.5 Forward Current vs. Ambient Temperature 3 of 5 3/10/00 300043A SURFACE MOUNT LED LAMP Round Top (1206) Chip Type - Water Clear Red Orange Yellow QTLP630C-R QTLP630C-E QTLP630C-Y Water Clear Water Clear Water Clear RECOMMENDED PRINTED CIRCUIT BOARD PATTERN 0.043 (1.1) 0.049 (1.25) 0.049 (1.25) 0.043 (1.1) RECOMMENDED IR REFLOW SOLDERING PROFILE 5 sec MAX soldering time 240° C MAX +5° C/s MAX -5° C/s MAX 60 - 120 sec Preheating 120 - 150° C MAX 4 of 5 3/10/00 300043A SURFACE MOUNT LED LAMP Round Top (1206) Chip Type - Water Clear DISCLAIMER FAIRCHILD SEMICONDUCTOR RESERVES THE RIGHT TO MAKE CHANGES WITHOUT FURTHER NOTICE TO ANY PRODUCTS HEREIN TO IMPROVE RELIABILITY, FUNCTION OR DESIGN. FAIRCHILD DOES NOT ASSUME ANY LIABILITY ARISING OUT OF THE APPLICATION OR USE OF ANY PRODUCT OR CIRCUIT DESCRIBED HEREIN; NEITHER DOES IT CONVEY ANY LICENSE UNDER ITS PATENT RIGHTS, NOR THE RIGHTS OF OTHERS. LIFE SUPPORT POLICY FAIRCHILD’S PRODUCTS ARE NOT AUTHORIZED FOR USE AS CRITICAL COMPONENTS IN LIFE SUPPORT DEVICES OR SYSTEMS WITHOUT THE EXPRESS WRITTEN APPROVAL OF THE PRESIDENT OF FAIRCHILD SEMICONDUCTOR CORPORATION. As used herein: 1. Life support devices or systems are devices or systems which, (a) are intended for surgical implant into the body, or (b) support or sustain life, and (c) whose failure to perform when properly used in accordance with instructions for use provided in the labeling, can be reasonably expected to result in a significant injury of the user. www.fairchildsemi.com 5 of 5 2. A critical component in any component of a life support device or system whose failure to perform can be reasonably expected to cause the failure of the life support device or system, or to affect its safety or effectiveness. © 2000 Fairchild Semiconductor Corporation 3/10/00 300043A