ETC SRMB2.5-SC

Imaging
D A T A S H E E T
Lighting
Telecom
Fiber-Optic Receiver Modules
InGaAs PIN Photodiode Receivers
SRMB2.5
Fiber-Optic Receiver Modules
Description
The SRMB series incorporates a
high-speed InGaAs PIN photodiode
with a silicon transimpedance
amplifier in a coaxial package for
digital communication applications.
The SRMB series conforms to
Synchronous Optical Network
(SONET) requirements for OC-48
(2.5 Gbps) receivers used in 1550 nm
long-range, intermediate-range and
short-range applications. Receiver
modules are available in industrystandard FC or SC receptacles, or in
fibered packages with either
multi-mode or single-mode pigtail.
Committed to supplying the highest quality
products, PerkinElmer Optoelectronics is
certified to meet ISO 9001. The SRMB
series is designed to satisfy Telcordia
quality specification GR-468-CORE.
All devices undergo periodic process
qualification programs to assure high
reliability.
Applications
• SONET transmission equipment
• Fiber channel, Ethernet
• Digital video transmission
equipment/CATV
Features
•
•
•
•
•
InGaAs PIN detector
Low-noise transimpedance amplifier
2.5 Gbps
Fibered and connectorized modules
High reliability
.
www.perkinelmer.com/opto
SRMB2.5
Typical Connection Circuitry
PIN
DESCRIPTION
1
O/P +
2
+Vdd
3
O/P -
4
GND
Specifications
Test conditions: T=22° C, Vdd = 5 Volts, RL = 50 Ohms AC. Limits applicable at 22° C (case temperature).
PARAMETER
SRMB2.5
Units
Min Typ Max
Bandwidth (-3dB, 50 Ohms)
1700 1950
MHz
Responsivity, single-ended (1300 nm)
0.9
KV/W
Effective transimpedance
Sensitivity (BER=10-10)
-24
Overload
0
1.1
1.3
kOhms
-25
dBm
dBm
Output offset voltage
4.7
Volts
Output impedance
50
Ohms
TIA supply current
45
65
mA
225
325
mW
TIA power dissipation
Note:
Consult PerkinElmer Optoelectronics for typical performance characteristics over the operating temperature range.
01-009:070202/2
www.perkinelmer.com/opto
SRMB2.5
Package Outline
0.75
3.90
12.7/14.2
BALL
Ø5.45
0.48
4 PL
LENS
Ø4.71
Ø1.55
PIGTAIL
SC
RECEPTACLE
01-009:070202/3
www.perkinelmer.com/opto
SRMB2.5
Package Outline
ST
RECEPTACLE
FC
RECEPTACLE
Maximum Ratings
Ordering Guide
Supply Voltage (Vdd)
Optical power
Fiber bend radius
Operating case temp.
Storage temperature
7 Volts
2 mW
30 mm min.
-40/85° C
-40/85° C
Receptacle version
Pigtail version
Ball Lens Only
Generic type: PP
SRMB2.5-PP
Generic type:
SRMB2.5-FFCC
SRMB2.5
Receptacle type (PP)
Fiber type (FF)
FC: FC Receptacle
SC: SC Receptacle
ST: ST Receptacle
09: 9/125/900 µm
50: 50/125/900 µm
62: 62.5/125/900 µm
Connector type (CC)
FC: FC connector
SC: SC connector
PerkinElmer Optoelectronics reserves the right to change or amend specifications
and/or configurations at any time without notice.
Canada:
USA:
Europe:
Asia:
PerkinElmer Optoelectronics
22001 Dumberry Road
Vaudreuil, Québec, J7V-8P7
Canada
Phone: (450) 424-3300
Fax: (514) 693-2210
PerkinElmer Optoelectronics
44370 Christy Street
Fremont, CA
94538-3180
Phone: (510) 979-6500
Fax: (510) 687-1152
PerkinElmer Optoelectronics GmbH
Wenzel-Jaksch-Str.31
65199 Wiesbaden
Phone: +49 611 492 534
Fax: +49 611 492 578
PerkinElmer Optoelectronics
47 Ayer Rajah Crescent #06-12
Singapore 139947
Phone: +65 775 2022
Fax: 65 775 1008
.
© 2001 PerkinElmer inc. All rights reserved.
01-009:070202/4
www.perkinelmer.com/opto