SVR1118 SERIES SOLID STATE DEVICES, INC. 14830 Valley View Blvd * La Mirada, Ca 90638 Phone: (562) 404-7855 * Fax: (562) 404-1773 [email protected] * www.ssdi-power.com 800 mAmps /2.5 thru 5Volts FIXED LOW DROPOUT LINEAR VOLTAGE REGULATOR Designer's Data Sheet Part Number /Ordering Information 1/ SVR1118 - 2.5 J DB H Screening 2/: _ = Not Screened H = High Rel Level K = Space Level R = Radiation Tolerant Lead Bend: 3/ _ = Straight DB = Down Bend UB = Up Bend Z = Z Bend Package: 4/ J = TO-257 G = CerPack S.5 = SMD.5 -28= LCC 28 Voltage: 2.5 = 2.5V 2.85= 2.85V 5 = 5V FEATURES: • • • • • • • • • • • • • MAXIMUM RATINGS Replacement for LT1118 Seres Eutectic Die Attach Regulates While Sourcing or Sinking Current 600: :A Quiescent Current Ultra Low Power Shutdown Mode Stable for Any CLOAD P 0.22: :F Fast Settling Time 1V Dropout Voltage Isolated Hermetically Sealed Power Package 150oC Operating Temperature Custom Lead Forming Available Class H or K (Space) Screening Available Radiation Tolerant Devices are Available SYMBOL VALUE UNITS Supply Voltage VCC 15 V Input Voltage VIN -0.2 to 7 V VOUT -0.2 to VCC + 0.5 V Operating Temperature TO P -55 to +150 o Storage Temperature TSTG -65 to +150 o Output Voltage TO-257 (J): CerPack (G): SMD.5 (S.5): FOR PACKAGE OUTLINE REQUEST FOLLOWING DOCUMENTS C C LCC 28 (-28): PIN ASSIGNMENT DOCUMENT PACKAGE Vout Gnd Vin TO-257 (J, JDB, JUB) 60-0149-504 TO-257 (J) Pin 1 Pin 2 Pin 3 CerPack (G, GZB) 60-0149-366 CerPack (G) Pin 1 Base Pin 2 SMD.5 (S.5) 60-0149-507 SMD.5 (S.5) Pin 2 Pin 1 Pin 3 LCC28 (-28) 60-0149-342 LCC 28 (-28) 1, 15 - 28 5 - 11 2, 3, 13, 14 PACKAGE NOTE: All specifications are subject to change without notification. SCD's for these devices should be reviewed by SSDI prior to release. DATA SHEET #: SVR005A SVR1118 SERIES SOLID STATE DEVICES, INC. 14830 Valley View Blvd * La Mirada, Ca 90638 Phone: (562) 404-7855 * Fax: (562) 404-1773 [email protected] * www.ssdi-power.com 4/ to SYMBOL MIN TYP MAX UNITS VIN = 5V VIN = 0V * * VIN VIN --- 0.6 1.0 1.0 10 mA :A Input Low Level Input High Level * * 0.4 -- 1.4 1.4 -2 V V No Load All Operating Conditions 5/ SVR1118-2.85 No Load All Operating Conditions 5/ SVR1118-5 No Load All Operating Conditions 5/ 25 * 25 * 25 * VOUT 2.47 2.45 2.82 2.79 4.95 4.90 2.5 2.5 2.85 2.85 5.0 5.0 2.53 2.55 2.88 2.91 5.05 5.10 V V V V V V (4.2V # VIN # 15V) (4.75V # VIN # 15V) (6.5V # VIN # 20V) * * * ª VOUT ª VIN ---- ---- 6.0 6.0 10 mV mV mV (0#IOUT#800mA) (-400mA#IOUT#0) (0#IOUT#800mA) (-400mA#IOUT#0) (0#IOUT#800mA) (-400mA#IOUT#0) * * * * * * ------- ------- 10 10 10 10 25 25 mV mV mV mV mV mV (IOUT = 100mA) (IOUT = 800mA) 25 25 --- 0.85 1.0 1.1 1.3 V V (fRIPPLE = 120Hz, VRIPPLE = 0.5VP-P, ªV=2V) 25 25 60 80 -- dB Load Transient Settling Time ªV = 25V; CLOAD =1:F (0#IOUT#800mA) (-400mA#IOUT#0) 25 25 --- 5 5 --- :sec Output Short Circuit Current (VOUT = 0) (VOUT = VIN) 800 -- 1200 -700 -- 400 mA mA Electrical Characteristics Quiescent Current Quiescent Current in Shutdoun Enable Input Threshholds Output Voltage SVR1118-2.5 Line Regulation (IOUT = 0A) SVR1118-2.5 SVR1118-2.85 SVR1118-5 Load Regulation 6/ SVR1118-2.5 SVR1118-2.85 SVR1118-5 Dropout Voltage 7/ Ripple Rejection ª VOUT ª IOUT ªV ISC + ISC - Thermal Shutdown Junction Temperature No Load -- 170 -- Enable Turn-On Delay No Load -- 50 -- o C :sec NOTES: * Full Temperature Range 1/ For Ordering Information, Price, and Availability Contact Fac- 5/ All Operating Conditions include the combined effects of Load tory. Current, Input Voltage, and Temperature over each parameter’s full range. 2/ Screening per MIL-PRF-19500. 3/ For Package Outlines and Lead Bend Options Contact Factory 6/ Load and Line Regulation are tested at a constant junction temperature by low duty cycle pulse testing. 4/ Unless Otherwise Specified, testing done at VCC = 5V 7/ Dropout Voltage is defined as a minimum Input to Output (for SVR1118-2.5 and SVR1118-2.85) and at VCC = 7V Voltage measured while sourcing the specified current. (for SVR1118-5); CLOAD = 1:F; ILOAD = 0.