0.5µm CMOS Gate Array CMOS-N5 Family New s t c u Prod Features The CMOS-N5 family is a channel-less type gate array that provides high speed operation with a 5-V power supply voltage. Drastic cost reductions have been achieved compared with the conventional CMOS-6 and CMOS-8 families thanks to higher integration by the adoption of 0.5 µm technology (2-layer wiring), and lowering the package assembly cost. Moreover, the 3-V power supply voltage is supported for the CMOS-N5 family. NEW CMOS-6 Family CMOS-N5 Family CMOS-8 Family [Integration] • 3K to 120K gates (number of integrated gates) • 2K to 86K gates (number of usable gates) [Package] • QFP (Fine pitch) 160 to 304 pins • TQFP 48 to 80 pins • LQFP 44 to 160 pins [High-speed operation] (preliminary) • tPD = 0.26 ns (2-input NAND (power gate), fanout = 2, standard wiring length) • Operating frequency: 60 MHz max. [Function blocks] • CPU peripheral block • RAM block (1 port/2 ports) • Oscillation block • CTS block [Test design] • Scan path test 2 Pamphlet A13629EJ5V1PF Product Overview Product type list Product name Note 1 Number of integrated gates Number of usable gates Note 2 Note 3 Number of pads µPD65880 µPD65881 µPD65882 µPD65883 µPD65884 3456 5880 13952 25344 33864 2764 4704 11161 20275 27091 72 88 120 160 184 Internal gate 0.46 ns (fanout = 2, wiring length=2mm) Power gate 0.30 ns (fanout = 2, wiring length=2mm) Input buffer 0.33 ns (fanout = 2, wiring length=2mm) Output buffer 1.30 ns (CL = 15 pF) Output drive capability IOL = 3, 6, 9, 12, 18, 24 mA Power supply voltage 5 V ± 10 % (CMOS level) Product name Note 1 Number of integrated gates Number of usable gates Note 4 Note 3 Number of pads µPD65885 µPD65887 µPD65889 µPD65890 µPD65893 40768 56496 76000 99528 123384 28537 39547 53200 69669 86368 244 284 324 372 412 Internal gate 0.46 ns (fanout = 2, wiring length=2mm) Power gate 0.30 ns (fanout = 2, wiring length=2mm) Input buffer 0.33 ns (fanout = 2, wiring length=2mm) Output buffer 1.30 ns (CL = 15 pF) Output drive capability IOL = 3, 6, 9, 12, 18, 24 mA Power supply voltage 5 V ± 10 % (CMOS level) Notes 1. 2-input NAND conversion 2. Cell utilization rate 80 % 3. Including power supply and GND pins. The number of pins that can actually be used differs depending on the type of package. 4. Cell utilization rate 70 % Pamphlet A13629EJ5V1PF 3 Package list (1) Package QFP (FP) TQFP LQFP Remark 4 Number of pins Lead pitch (mm) Body height (mm) Body size (mm) 160 0.5 2.7 24 × 24 208 0.5 3.2 28 × 28 240 0.5 3.2 32 × 32 304 0.5 3.7 40 × 40 48 0.5 1.0 7×7 64 0.65 1.0 12 × 12 80 0.5 1.0 12 × 12 44 0.8 1.4 10 × 10 100 0.5 1.4 14 × 14 160 0.5 1.4 24 × 24 FP : Fine pitch Pamphlet A13629EJ5V1PF Package list (2) µPD65880 µPD65881 µPD65882 µPD65883 µPD65884 160-pin QFP (FP) – – – – – 208-pin QFP (FP) – – – – – 240-pin QFP (FP) – – – – – 304-pin QFP (FP) – – – – – Master name 48-pin TQFP – 64-pin TQFP – 80-pin TQFP – – 44-pin LQFP – 100-pin LQFP – – 160-pin LQFP – – – – µPD65885 µPD65887 µPD65889 µPD65890 µPD65893 – – – Master name 160-pin QFP (FP) 208-pin QFP (FP) 240-pin QFP (FP) – 304-pin QFP (FP) – – – 48-pin TQFP – – – – – 64-pin TQFP – – – 80-pin TQFP – – – – – – – – 44-pin LQFP – – 100-pin LQFP 160-pin LQFP Remark : Released – – – : Not to be supported Blank : Under consideration Pamphlet A13629EJ5V1PF FP : Fine pitch 5 Development Tools Easy interface with your EWS or PC Users can choose the following tools to their environment. Caution Some functions may not be supported. Make it sure before use. OPENCADTM V5.4 Configuration Tool Function NEC Tool Function simulator – Interface Data • Netlist PWC/EDIF(2.0.0)/ VdrawTM Schematic editor Logic synthesis Gate level simulator • Test pattern V.sim ALBA STANote 1 Tiara Fault simulator Note 2 C.FGRADETM – ® ModelSim/Verilog-XL/NC-Verilog/ VCS Formality ®/TuxedoTM-LEC – Design for test NC-VerilogTM/VCSTM Design Compiler TM Formal verifier ModelSimTM/Verilog-XLTM/ VerilogTM HDL – Note 1 Commercially Available Tool Interface • Delay information file PrimeTime® – TESTACT/NEC_SCAN/ • Constraints file NEC_BSCAN/NEC_BIST/ TM TestCompiler /TestgenTM FastScanTM/TetraMaxTM TESTBUS Floor planner Note 3 ace_floorplan – galet_floorplan Placement and Routing Note 3 Gate EnsembleTM Galet Silicon EnsembleTM Notes 1. Sign-off tool 2. Tool not supported in the HPTM version 3. Stand-alone tool Remark Platform: SUNTM(SolarisTM)/HP(HP-UXTM) GUI : X11R5/MotifTM 1.2 C.FGRADE, OPENCAD, Vdraw and V.sim are trademarks of NEC Corporation. Design Compiler is a registered trademark of Synopsys, Inc. in Japan. PrimeTime and Formality are registered trademarks of Synopsys, Inc. in the USA. Testgen, TetraMAX, TestCompiler and VCS are trademarks of Synopsys, Inc. Gate Ensemble, Silicon Ensemble, NC-Verilog, Verilog, and Verilog-XL are trademarks of Cadence Design Systems, Inc. ModelSim is a trademark of Model Technology, Inc. Tuxedo is a trademark of Verplex System, Inc. FastScan is a trademark of Mentor Graphics, Inc. SUN and Solaris are trademarks of SUN Microsystems, Inc. HP and HP-UX are trademarks of Hewlett-Packard Co. Motif is a trademark of Open Software Foundation, Inc. (OSF). 6 Pamphlet A13629EJ5V1PF The export of this product from Japan is regulated by the Japanese government. To export this product may be prohibited without governmental license, the need for which must be judged by the customer. The export or re-export of this product from a country other than Japan may also be prohibited without a license from that country. Please call an NEC sales representative. • The information in this document is current as of February, 2001. The information is subject to change without notice. For actual design-in, refer to the latest publications of NEC's data sheets or data books, etc., for the most up-to-date specifications of NEC semiconductor products. Not all products and/or types are available in every country. Please check with an NEC sales representative for availability and additional information. • No part of this document may be copied or reproduced in any form or by any means without prior written consent of NEC. NEC assumes no responsibility for any errors that may appear in this document. • NEC does not assume any liability for infringement of patents, copyrights or other intellectual property rights of third parties by or arising from the use of NEC semiconductor products listed in this document or any other liability arising from the use of such products. No license, express, implied or otherwise, is granted under any patents, copyrights or other intellectual property rights of NEC or others. • Descriptions of circuits, software and other related information in this document are provided for illustrative purposes in semiconductor product operation and application examples. The incorporation of these circuits, software and information in the design of customer's equipment shall be done under the full responsibility of customer. NEC assumes no responsibility for any losses incurred by customers or third parties arising from the use of these circuits, software and information. • While NEC endeavours to enhance the quality, reliability and safety of NEC semiconductor products, customers agree and acknowledge that the possibility of defects thereof cannot be eliminated entirely. To minimize risks of damage to property or injury (including death) to persons arising from defects in NEC semiconductor products, customers must incorporate sufficient safety measures in their design, such as redundancy, fire-containment, and anti-failure features. • NEC semiconductor products are classified into the following three quality grades: "Standard", "Special" and "Specific". The "Specific" quality grade applies only to semiconductor products developed based on a customer-designated "quality assurance program" for a specific application. The recommended applications of a semiconductor product depend on its quality grade, as indicated below. Customers must check the quality grade of each semiconductor product before using it in a particular application. "Standard": Computers, office equipment, communications equipment, test and measurement equipment, audio and visual equipment, home electronic appliances, machine tools, personal electronic equipment and industrial robots "Special": Transportation equipment (automobiles, trains, ships, etc.), traffic control systems, anti-disaster systems, anti-crime systems, safety equipment and medical equipment (not specifically designed for life support) "Specific": Aircraft, aerospace equipment, submersible repeaters, nuclear reactor control systems, life support systems and medical equipment for life support, etc. The quality grade of NEC semiconductor products is "Standard" unless otherwise expressly specified in NEC's data sheets or data books, etc. If customers wish to use NEC semiconductor products in applications not intended by NEC, they must contact an NEC sales representative in advance to determine NEC's willingness to support a given application. (Note) (1) "NEC" as used in this statement means NEC Corporation and also includes its majority-owned subsidiaries. (2) "NEC semiconductor products" means any semiconductor product developed or manufactured by or for NEC (as defined above). M8E 00. 4 Pamphlet A13629EJ5V1PF 7 For further information, please contact: NEC Corporation NEC Building 7-1, Shiba 5-chome, Minato-ku Tokyo 108-8001, Japan Tel: 03-3454-1111 http://www.ic.nec.co.jp/ [North & South America] [Europe] NEC Electronics Inc. 2880 Scott Blvd. Santa Clara, CA 95050-2554, U.S.A. Tel: 408-588-6000 800-366-9782 Fax: 408-588-6130 800-729-9288 http://www.necel.com/ NEC Electronics (Germany) GmbH Kanzlerstr. 2, 40472 Düsseldorf, Germany Tel: 0211-650302 Fax: 0211-6503490 http://www.nec.de/ NEC do Brasil S.A. Electron Devices Division Rodovia Presidente Dutra, Km 214 07210-902-Guarulhos-SP Brasil Tel: 011-6462-6810 Fax: 011-6462-6829 Munich Office Arabellastr. 17 81925 München, Germany Tel: 089-921003-0 Fax: 089-92100315 Stuttgart Office Industriestr. 3 D-70565 Stuttgart, Germany Tel: 0711-99010-0 Fax: 0711-99010-19 Hannover Office Podbielskistr. 164 D-30177 Hannover, Germany Tel: 0511-33402-0 Fax: 0511-33402-34 Benelux Office Boschdijk 187a 5612 HB Eindhoven, The Netherlands Tel: 040-2445845 Fax: 040-2444580 Scandinavia Office P.O. Box 134 18322 Taeby, Sweden Tel: 08-6380820 Fax: 08-6380388 NEC Electronics (UK) Limited Cygnus House, Sunrise Parkway, Linford Wood, Milton Keynes, MK14 6NP, U.K. Tel: 01908-691-133 Fax: 01908-670-290 NEC Electronics (France) S.A. 9, rue Paul Dautier-B.P. 52 78142 Velizy-Villacoublay Cédex France Tel: 01-3067-5800 Fax: 01-3067-5899 Madrid Office Juan Esplandiu, 15 28007 Madrid, Spain Tel: 091-504-2787 Fax: 091-504-2860 NEC Electronics Italiana s.r.l. Via Fabio Filzi, 25/A, 20124 Milano, Italy Tel: 02-667541 Fax: 02-66754299 [Asia & Oceania] NEC Electronics Hong Kong Limited 12/F., Cityplaza 4, 12 Taikoo Wan Road, Hong Kong Tel: 2886-9318 Fax: 2886-9022/9044 Seoul Branch 10F, ILSONG Bldg., 157-37, Samsung-Dong, Kangnam-Ku Seoul, the Republic of Korea Tel: 02-528-0303 Fax: 02-528-4411 NEC Electronics Taiwan Ltd. 7F, No. 363 Fu Shing North Road Taipei, Taiwan, R. O. C. Tel: 02-2719-2377 Fax: 02-2719-5951 NEC Electronics Singapore Pte. Ltd. 238A Thomson Road #12-01/10 Novena Square Singapore 307684 Tel: 253-8311 Fax: 250-3583 G01. 7 Document No. A13629EJ5V2PF00(5th edition) Date Published August 2001 N CP(K) © NEC Corporation 1998 Printed in Japan