Philips Components Preliminary specification 2222 808 ..... ∅5 mm Film dielectric trimmers FEATURES QUICK REFERENCE DATA • Housing diameter 5 mm • Top and bottom or top adjustment • Round or hexagonal head • Vertical version. DESCRIPTION VALUE Cmin /Cmax 0.35/1.5 to 4/27 pF Rated voltage (DC) 150 V Test voltage (DC) for 1 minute 300 V Maximum contact resistance 10 mΩ APPLICATIONS Minimum insulation resistance 10000 MΩ • For consumer and industrial equipment. Tan δ at Cmax, 1 MHz: DESCRIPTION The vanes of the trimmer are stacked on a sturdy plastic base. The colour of the base indicates the maximum capacitance (see Tables 4, 5 and 6). The dielectric is a film of polypropylene (PP) or polytetrafluorethylene (PTFE) for the standard versions and polycarbonate (PC) for the economic and hexagonal head versions. The dielectric supports the vanes in such a way that good stability is ensured and no microphony can occur. Flux absorption between the vanes is prevented. Cleaning with solvents is not advised. For outline drawings and dimensions see Figs 1 and 2. PC ≤70 × 10−4 PP, PTFE ≤10 × 10−4 Category temperature range: PP −40 to +70 °C PC, PTFE −40 to +85 °C Climatic category (IEC 60068): PP 40/070/21 PC, PTFE 40/085/21 Minimum storage temperature −55 °C Related specification IEC 60418-1 and 4 MECHANICAL DATA DESCRIPTION Effective angle of rotation 180° Operating torque: Cmax < 20 pF 1 to 15 mNm Cmax ≥ 20 pF 1 to 25 mNm Maximum axial thrust QUALITY LEVEL Sampling and data evaluation for quality level in accordance with “MIL-STD-105D” and “IEC 60410”: <0.15% major defects <0.65% minor defects. Each capacitor is tested for minimum Cmax and is also subjected to the full test voltage. 1998 Mar 27 VALUE 6 2N Philips Components Preliminary specification 2222 808 ..... ∅5 mm Film dielectric trimmers ∅2.2 0.6(1) 0.5 handbook, full pagewidth H 0.4 +0.2 0 (1) +0.1 0.3 0 3 ±0.5 1.15 max. 2.2 ±0.2 5.6 ±0.2 W 3 +0.7 −0.5 CCB130 1.6 ±0.2 L 5.1 ±0.2 a. Dimensional outlines. P handbook, halfpage 1.3 CCB131 b. Hole pattern. Dimensions in mm. For dimensions H, W and L, see Tables 1 and 2. For dimension P, see Table 3. (1) The position of the shaft is not relative to the position of the vanes. Fig.1 Trimmers 2222 808 ..... series, with round head. 1998 Mar 27 7 Philips Components Preliminary specification 2222 808 ..... ∅5 mm Film dielectric trimmers 1.91 0.6 0.65 2.1 handbook, full pagewidth H 3 ±0.5 1.15 max. 2.2 ±0.2 5.6 ±0.2 W L a. Dimensional outlines. P handbook, halfpage 1.3 CCB131 b. Hole pattern. Dimensions in mm. For dimensions H, W and L, see Table 2. For dimension P, see Table 3. Fig.2 Trimmers 2222 808 ..... series, with hexagonal head. 1998 Mar 27 8 CCB132 Philips Components Preliminary specification 2222 808 ..... ∅5 mm Film dielectric trimmers Table 1 Standard versions; capacitance and relevant physical dimensions; see Fig.1 Cmin /Cmax (pF) Hmax (mm) Wmax (mm) Lmax (mm) 0.35/1.5 7.0 5.5 7.3 1.5/5 7.0 5.5 7.3 3/10 7.0 5.5 7.3 3/15 8.8 5.5 7.3 4/20 8.8 5.5 7.3 4/27 9.0 6.2 7.8 Table 2 Hexagonal and economic versions; relevant physical dimensions; see Fig.2 Hmax (mm) Wmax (mm) Lmax (mm) Hexagonal 9.7 5.5 7.3 Round 7.7 5.5 7.3 TYPE OF HEAD MOUNTING PACKAGING The trimmer has a lead pitch of 5.08 mm or 5.6 mm and can be mounted on printed-circuit boards with a minimum hole diameter of 1.25 mm. Bulk packaged in cardboard boxes lined with expanded plastic, 1000 units per box. 1998 Mar 27 9 Philips Components Preliminary specification 2222 808 ..... ∅5 mm Film dielectric trimmers ORDERING INFORMATION Table 3 Selection chart; see Figs 1 and 2 CATALOGUE NUMBER 2222 808 ..... Cmin /Cmax (pF) TOP AND BOTTOM ADJUSTMENT (P = 5.6 mm) TOP ADJUSTMENT ONLY (P = 5.6 mm) TOP ADJUSTMENT ONLY (P = 5.08 mm) Standard versions: polytetrafluorethylene, round head 0.35/1.5 22158 − − Standard versions: polypropylene, round head 1.5/5 23508 − 20508 3/10 23109 − 20109 3/15 23159 − 20159 4/20 23209 − 20209 4/27 23279 − 20279 Economic versions: polycarbonate, round head 1.5/7 − 20126 − 1.6/15 − 20127 − 3/20 − 20123 − 3.5/27 − 20128 − Economic versions: polycarbonate, hexagonal head 1.5/7 − 21708 − 1.6/15 − 21159 − 3/20 − 21209 − 3.5/27 − 21279 − 1998 Mar 27 10 Philips Components Preliminary specification 2222 808 ..... ∅5 mm Film dielectric trimmers ELECTRICAL DATA Table 4 Standard versions with round head GUARANTEED MAX. Cmin / MIN. Cmax at 200 kHz (pF) tan δ at Cmax × 10−4 1 MHz 100 MHz TEMP. COEFF.(1) (10−6/K) MIN. fres at Cmax (MHz) COLOUR SMALLEST OF PACKAGING BASE QUANTITY 0.35/1.5 ≤10 − −450 ±550 − − 1000 1.5/5 ≤10 ≤25 −200 ±550 700 grey 1000 3/10 ≤10 ≤25 −250 ±550 500 yellow 1000 3/15 ≤10 ≤25 −250 ±550 400 blue 1000 4/20 ≤10 ≤25 −250 ±400 300 green 1000 4/27 ≤10 ≤25 −250 ±400 300 red 1000 CATALOGUE NUMBER 2222 808 22158 2222 808 20508 2222 808 23508 2222 808 20109 2222 808 23109 2222 808 20159 2222 808 23159 2222 808 20209 2222 808 23209 2222 808 20279 2222 808 23279 Note 1. C: 60% to 80% of Cmax; Tamb: from +20 °C to +70 °C. Table 5 Economic versions with round head REFERENCE Cmin /Cmax (pF) tan δ at Cmax × 10−4 (1 MHz) TEMP. COEFF. (10−6/K) COLOUR OF BASE SMALLEST PACKAGING QUANTITY CATALOGUE NUMBER 1.5/7 ≤70 −50 ±550 grey 1000 2222 808 20126 1.6/15 ≤70 −50 ±550 blue 1000 2222 808 20127 3/20 ≤70 −50 ±550 green 1000 2222 808 20123 3.5/27 ≤70 −100 ±400 red 1000 2222 808 20128 Table 6 Versions with hexagonal head REFERENCE Cmin /Cmax (pF) tan δ at Cmax × 10−4 (1 MHz) TEMP. COEFF. (10−6/K) COLOUR OF BASE SMALLEST PACKAGING QUANTITY CATALOGUE NUMBER 1.5/7 ≤70 −50 ±550 grey 1000 2222 808 21708 1.6/15 ≤70 −50 ±550 blue 1000 2222 808 21159 3/20 ≤70 −50 ±550 green 1000 2222 808 21209 3.5/27 ≤70 −100 ±400 red 1000 2222 808 21279 1998 Mar 27 11 Philips Components Preliminary specification 2222 808 ..... ∅5 mm Film dielectric trimmers TESTS AND REQUIREMENTS Table 7 Test procedures and requirements IEC 60418-1 CLAUSE IEC 60068 TEST METHOD TEST PROCEDURE REQUIREMENTS 4.2 method of mounting method A 14 capacitance drift after TC measurement ∆C/C: ≤3% for Cmax ≤ 10 pF ∆C/C: ≤2% for Cmax > 10 pF 19 thrust axial thrust of 2 N ∆C/C: ≤0.4% 21 robustness of terminations: 21.1 Ua tensile 1N no damage 21.2 Ub bending 1 cycle no damage 22 Na rapid change of temperature 1 cycle; 0.5 hours at lower and 0.5 hours at upper category temperature ∆C/C: ≤2.5% 23 T soldering: Ta solderability solder bath immersion 3 mm; 235 °C; 2 s good wetting no mechanical damage Tb resistance to heat solder bath: 260 °C; 10 s no mechanical damage 24 Eb impact bump 4000 ±10 bumps; 40 g; 6 ms ∆C/C: ≤1%; no mechanical damage 25 Fc vibration frequency 10 to 55 Hz; amplitude 0.75 mm; 1.5 hours ∆C/C: ≤1%; no mechanical damage 26 26.1 ∆C/C: ≤4% climatic sequence: B dry heat 16 hours at upper category temperature tan δ for PP and PTFE foil: ≤15 × 10−4 tan δ for PC foil: ≤80 × 10−4 Rins: ≥10000 MΩ rotor contact R: ≤10 mΩ 26.2 D damp heat accelerated, first cycle 1 cycle; 24 hours; +40 °C; 95 to 100% RH voltage proof: 300 V for 1 minute 26.3 Aa cold 16 hours; −40 °C visual examination: no mechanical damage damp heat accelerated, remaining cycles 1 cycle; 24 hours; +40 °C; 95 to 100% RH operating torque: 1 to 20 mNm for Cmax < 20 pF; 1 to 30 mNm for Cmax ≥ 20 pF 26.5 1998 Mar 27 12 Philips Components Preliminary specification 2222 808 ..... ∅5 mm Film dielectric trimmers IEC 60418-1 CLAUSE IEC 60068 TEST METHOD 27 Ca TEST damp heat steady state PROCEDURE 21 days; +40 °C; 90 to 95% RH REQUIREMENTS ∆C/C: ≤3% tan δ for PP and PTFE foil: ≤15 × 10−4; tan δ for PC foil: ≤80 × 10−4 Rins: ≥10000 MΩ; rotor contact R: ≤10 mΩ voltage proof: 300 V for 1 minute visual examination: no mechanical damage operating torque: 1 to 20 mNm for Cmax < 20 pF; 1 to 30 mNm for Cmax ≥ 20 pF 29 mechanical endurance 10 cycles ∆C/C: ≤3% ∆C/C after axial thrust: ≤0.3%; rotor contact R: ≤10 mΩ voltage proof: 300 V for 1 minute visual examination: no mechanical damage operating torque: 0.5 to 22.5 mNm for Cmax < 20 pF; 0.5 to 30 mNm for Cmax ≥ 20 pF 1998 Mar 27 13 Philips Components Preliminary specification 2222 808 ..... ∅7.5 mm Film dielectric trimmers FEATURES QUICK REFERENCE DATA • Housing diameter 7.5 mm • For a basic grid of 2.54 mm (0.1") or 2.50 mm • Top and bottom or top adjustment • Vertical and horizontal versions • Round or hexagonal head. DESCRIPTION VALUE Cmin /Cmax 1.4/5.5 to 3/50 pF Rated voltage (DC) 250 V Test voltage (DC) for 1 minute 500 V Maximum contact resistance 10 mΩ Minimum insulation resistance 10000 MΩ Category temperature range: APPLICATIONS • For consumer and industrial equipment. PP −40 to +70 °C PE, PC, PTFE, PET −40 to +85 °C Climatic category (IEC 60068): PP DESCRIPTION The vanes of the trimmer are stacked on a sturdy plastic base. The colour of the base indicates the maximum capacitance (see Table 2). The dielectric is a film of polypropylene (PP), polyethylene (PE), polycarbonate (PC), polytetrafluorethylene (PTFE), or polyethyleneterephtalate (PET) which supports the vanes in such a way that good stability is ensured and no microphony can occur. 40/070/21 PE, PC, PTFE, PET 40/085/21 Minimum storage temperature −55 °C Related specification IEC 60418-1 and 4 MECHANICAL DATA DESCRIPTION Effective angle of rotation VALUE 180° Operating torque: Cmax < 33 pF 1 to 15 mNm Cmax ≥ 33 pF 1 to 25 mNm Maximum axial thrust 2N Flux absorption between the vanes is prevented. Cleaning with solvents is not advised. Versions are available with either a vertical spindle (see Fig.1), or a horizontal spindle (see Fig.2). Both versions have top adjustment by means of a screwdriver or trimming key and bottom adjustment by means of a key as shown in Fig.5. QUALITY LEVEL Sampling and data evaluation for quality level in accordance with “MIL-STD-105D” and “IEC 60410” : <0.15% major defects <0.65% minor defects. Each capacitor is tested for minimum Cmax and is also subjected to the full test voltage. For outline drawings and dimensions see Figs 1 and 2. 1998 Mar 27 14 Philips Components Preliminary specification 2222 808 ..... ∅7.5 mm Film dielectric trimmers ROUND HEAD HEXAGONAL HEAD 0.6 30° ±5° ∅2.5 0.6 0.7 2.5 ±0.1 0.5 handbook, full pagewidth 10(1) max. Z 4 ±0.5 rotor (2×) stator 3 ±0.2 4.5 8 max. ±0.2 1.15 max. 7.6 ±0.1 2.2 ∅1.6 DETAIL Z turned 90° 0.95 ±0.2 Dimensions in mm. For hole pattern see Fig.3. (1) 11 max. for Cmax = 40 pF and 50 pF. CCB134 Fig.1 Trimmers 2222 808 ..... series, vertical version. 1998 Mar 27 15 0.6 ±0.1 0.5 ±0.15 Philips Components Preliminary specification 2222 808 ..... ∅7.5 mm Film dielectric trimmers ∅2.5 0.6 0.7 handbook, full pagewidth 10(1) max. 110° ±5° rotor (2×) Z 4 ±0.5 5 stator 0 −0.1 1.15 max. 4.5 ±0.2 7.6 ±0.1 8.6 max. 8.6 ±0.2 ∅1.6 DETAIL Z turned 90° 0.95 ±0.2 CCB135 Dimensions in mm. For hole pattern see Fig.4. (1) 11 max. for Cmax = 40 pF and 50 pF. Fig.2 Trimmers 2222 808 ..... series, horizontal version. 1998 Mar 27 16 0.6 ±0.1 0.5 ±0.15 Philips Components Preliminary specification 2222 808 ..... ∅7.5 mm Film dielectric trimmers 5.08 R 7.5 handbook, halfpage R R handbook, halfpage 5.08 2.5 1.3 S S CCB137 R 1.3 CCB136 Dimensions in mm. R = rotor, S = stator. The large hole is for bottom adjustment and the diameter is determined by user’s requirements. Dimensions in mm. R = rotor, S = stator. Fig.3 Hole pattern; see Fig.1. Fig.4 Hole pattern; see Fig.2. Adjustment For top adjustment a screwdriver or trimming key can be used; for bottom adjustment a key is required as shown in Fig.5. ∅3 +0.1 0 +0.1 0.7 0 ∅1.7 0.6 +0.2 0 handbook, halfpage 2 min. CCB138 Dimensions in mm. Fig.5 Bottom adjustment key. 1998 Mar 27 17 Philips Components Preliminary specification 2222 808 ..... ∅7.5 mm Film dielectric trimmers ORDERING INFORMATION Table 1 Selection chart CATALOGUE NUMBER 2222 808 ..... HORIZONTAL VERSION VERTICAL VERSION Cmin /Cmax (pF) ROUND HEAD HEXAGONAL HEAD ROUND HEAD TOP AND BOTTOM ADJUSTMENT TOP ADJUSTMENT ONLY TOP AND BOTTOM ADJUSTMENT TOP AND BOTTOM ADJUSTMENT 1.4/5.5 11558 00004 − 51558 2/9 00018 − − − 2/10 11109 00005 17109 51109 2/10 − 11004 − − 2/15 11159 − − − 2/18 00016 − − − 2.5/20 − 11006 − − 2.5/22 11229 00006 17229 51229 2.5/27 11279 − − 51279 3/33 11339 − − − 3/40 11409 − 17409 51409 3/50 11509 − 17509 51509 MOUNTING PACKAGING The trimmer can be mounted on printed-circuit boards with a grid of 2.50 mm or 2.54 mm and a minimum hole diameter of 1.25 mm. For hole patterns see Figs 3 and 4. Bulk packaged in cardboard boxes lined with expanded plastic. For smallest packaging quantity (SPQ) see Table 2. 1998 Mar 27 18 Electrical characteristics, smallest packaging quantities and catalogue numbers GUARANTEED SHAPE MAX. Cmin / MIN. Cmax SPINDLE OF FIG. at 200 kHz HEAD (pF) 1.4/5.5 2/9 vertical 1 1 top top + bottom vertical 1 top + bottom 1 top + bottom 1 top 1 top horizontal round 2 top + bottom vertical round 1 vertical round 1 round hexag. 2/10 PE ≤10 ≤25 PTFE ≤10 ≤15 grey 1400 2222 808 00004 −150 ±800 400 yellow 1400 2222 808 00018 1400 2222 808 00005 19 ≤10 ≤25 −250 ±800 480 yellow top PC ≤70 ≤100 −150 ±800 250 yellow 1000 2222 808 11004 top + bottom PP ≤10 ≤25 −250 ±600 450 blue 1400 2222 808 11159 −250 ±350 350 green 1400 2222 808 00016 250 green 1000 2222 808 11006 1400 2222 808 17109 1200 2222 808 51109 round 1 top + bottom PTFE ≤10 ≤15 round 1 top PET ≤160 − vertical round 1 top + bottom 1 top vertical hexag. 1 top horizontal round 2 top + bottom vertical round 1 top + bottom horizontal round 2 top + bottom vertical round 1 top + bottom vertical round 1 top + bottom vertical hexag. 0 ±1100 1400 2222 808 11229 PP ≤10 ≤25 −200 ±500 350 green 1400 2222 808 00006 1400 2222 808 17229 1200 2222 808 51229 1400 2222 808 11279 PC ≤70 − −50 ±500 350 red PP ≤10 − −250 ±350 300 brown 1400 2222 808 11339 1200 2222 808 51279 1400 2222 808 11409 −50 ±400 top + bottom 1200 2222 808 51409 vertical round 1 top + bottom 1400 2222 808 11509 vertical hexag. 1 top 2 top + bottom PC ≤70 − −50 ±500 300 250 violet black 1400 2222 808 17409 1400 2222 808 17509 1200 2222 808 51509 Preliminary specification − top 2 horizontal round PC ≤70 1 horizontal round 2222 808 ..... ∅7.5 mm 3/50 850 PP vertical 3/40 −250 ±350 1400 2222 808 11109 vertical 3/33 CATALOGUE NUMBER 1200 2222 808 51558 2/18 2.5/27 MIN. fres COL. at Cmax OF SPQ (MHz) BASE 1400 2222 808 11558 2.5/20 2.5/22 TEMP. COEFF. (10−6/K) top + bottom 2 round DIEL. 1 MHz 100 MHz horizontal round vertical 2/15 round ADJ. MODE tan δ at Cmax × 10−4 Philips Components Table 2 Film dielectric trimmers 1998 Mar 27 ELECTRICAL DATA Philips Components Preliminary specification 2222 808 ..... ∅7.5 mm Film dielectric trimmers TESTS AND REQUIREMENTS Table 3 Test procedures and requirements IEC 60418-1 CLAUSE IEC 60068 TEST METHOD TEST PROCEDURE REQUIREMENTS 4.2 method of mounting method A 14 capacitance drift after TC measurement ∆C/C: ≤1% for Cmax < 40 pF; ∆C/C: ≤2.5% for Cmax ≥ 40 pF 19 thrust axial thrust of 2 N ∆C/C: ≤0.3% 21 robustness of terminations: 21.1 Ua tensile 1N no damage 21.2 Ub bending 1 cycle no damage 22 Na rapid change of temperature 1 cycle; 0.5 hours at lower and 0.5 hours at upper category temperature ∆C/C: ≤2% 23 T soldering: Ta solderability solder bath immersion 3 mm; 235 °C; 2 s good wetting no mechanical damage Tb resistance to heat solder bath: 260 °C; 10 s no mechanical damage 24 Eb impact bump 4000 ±10 bumps; 40 g; 6 ms ∆C/C: ≤0.6%; no mechanical damage 25 Fc vibration frequency 10 to 55 Hz; amplitude 0.35 mm; 1.5 hours ∆C/C: ≤0.6%; no mechanical damage 26 26.1 ∆C/C: ≤4 climatic sequence: B dry heat 16 hours at upper category temperature tan δ: ≤10 × 10−4 for Cmax < 27 pF; tan δ: ≤70 × 10−4 for Cmax ≥ 27 pF; tan δ: ≤80 × 10−4 for Cmax ≥ 40 pF Rins: ≥10000 MΩ; rotor contact R: ≤10 mΩ 26.2 D damp heat accelerated, first cycle 1 cycle; 24 hours; +40 °C; 95 to 100% RH voltage proof: 500 V for 1 minute 26.3 Aa cold 16 hours; −40 °C visual examination: no mechanical damage damp heat accelerated, remaining cycles 1 cycle; 24 hours; +40 °C; 95 to 100% RH operating torque: 1 to 15 mNm for Cmax < 33 pF; 1 to 25 mNm for Cmax ≥ 33 pF 26.5 1998 Mar 27 20 Philips Components Preliminary specification 2222 808 ..... ∅7.5 mm Film dielectric trimmers IEC 60418-1 CLAUSE IEC 60068 TEST METHOD 27 Ca TEST damp heat steady state PROCEDURE 21 days; +40 °C; 90 to 95% RH REQUIREMENTS ∆C/C: ≤5% tan δ: ≤30 × 10−4 for Cmax < 27 pF; tan δ: ≤70 × 10−4 for Cmax ≥ 27 pF; tan δ: ≤80 × 10−4 for Cmax ≥ 40 pF Rins: ≥10000 MΩ; rotor contact R: ≤10 mΩ voltage proof: 500 V for 1 minute visual examination: no mechanical damage operating torque: 1 to 15 mNm for Cmax < 33 pF; 1 to 25 mNm for Cmax ≥ 33 pF 29 mechanical endurance 10 cycles ∆C/C: ≤1.5% ∆C/C after axial thrust: ≤0.3%; rotor contact R: ≤10 mΩ voltage proof: 500 V for 1 minute visual examination: no mechanical damage operating torque: 1 to 15 mNm for Cmax < 33 pF; 1 to 25 mNm for Cmax ≥ 33 pF 1998 Mar 27 21 Philips Components Preliminary specification 2222 808 ..... ∅10 mm Film dielectric trimmers FEATURES QUICK REFERENCE DATA • Housing diameter 10 mm • For a basic grid of 2.54 mm (0.1") or 2.50 mm • Top and bottom or top adjustment • Vertical and horizontal versions • Round or hexagonal head. DESCRIPTION VALUE Cmin /Cmax 2.5/15 to 7/105 pF Rated voltage (DC) 150 V Test voltage (DC) for 1 minute 300 V Maximum contact resistance 10 mΩ Minimum insulation resistance 10000 MΩ Category temperature range: APPLICATIONS • For consumer and industrial equipment. DESCRIPTION The vanes of the trimmer are stacked on a sturdy plastic base. The colour of the base indicates the maximum capacitance (see Table 2). The dielectric is a film of polypropylene (PP), polycarbonate (PC) or polytetrafluorethylene (PTFE), which supports the vanes in such a way that good stability is ensured and no microphony can occur. Flux absorption between the vanes is prevented. Cleaning with solvents is not advised. Versions are available with either a vertical spindle (see Figs 1 and 2), or a horizontal spindle (see Fig.3). Both versions have top adjustment by means of a screwdriver or trimming key and bottom adjustment by means of a key as shown in Fig.7. PP −40 to +70 °C PC, PTFE −40 to +85 °C Climatic category (IEC 60068): PP 40/070/21 PC, PTFE 40/085/21 Minimum storage temperature −55 °C Related specification IEC 60418-1 and 4 MECHANICAL DATA DESCRIPTION Effective angle of rotation 180° Operating torque 2 to 25 mNm Maximum axial thrust 2N QUALITY LEVEL Sampling and data evaluation for quality level in accordance with “MIL-STD-105D” and “IEC 60410” : <0.15% major defects <0.65% minor defects. Each capacitor is tested for minimum Cmax and is also subjected to the full test voltage. For outline drawings and dimensions see Figs 1, 2 and 3. 1998 Mar 27 VALUE 22 Philips Components Preliminary specification 2222 808 ..... ∅10 mm Film dielectric trimmers ROUND HEAD EXTENDED HEXAGONAL HEAD ∅2.5 ∅2 0.6 1 handbook, full pagewidth 5.8 0.7 15.3 11 max. 0 −1 Z 4 ±0.5 rotor (2×) 1.15 max. stator 3 ±0.2 10.6 5 max. ±0.1 10 0 −0.2 2.5 0.4 max. ∅1.6 5.85 ±0.2 DETAIL Z turned 90° 0.65 ±0.2 CCB140 0.6 ±0.1 0.5 ±0.15 Dimensions in mm. Hole pattern 5 mm × 10 mm; see Fig.4. Fig.1 Trimmers 2222 808 ..... series, vertical version. 1998 Mar 27 23 Philips Components Preliminary specification 2222 808 ..... ∅10 mm Film dielectric trimmers ROUND HEAD EXTENDED HEXAGONAL HEAD ∅2.5 ∅2 0.6 1 handbook, full pagewidth 5.8 0.7 15.3 11 max. 0 −1 Z 4 ±0.5 rotor (2×) 3 ±0.2 1.15 max. 10.6 5 max. ±0.1 10 0 −0.2 5.85 ±0.2 2.5 ∅1.6 DETAIL Z turned 90° 0.85 max. 0.6 ±0.1 CCB141 0.5 ±0.15 Dimensions in mm. Hole pattern 7.5 mm × 5 mm; see Fig.5. Fig.2 Trimmers 2222 808 ..... series, vertical version. 1998 Mar 27 24 stator Philips Components Preliminary specification 2222 808 ..... ∅10 mm Film dielectric trimmers ROUND HEAD EXTENDED HEXAGONAL HEAD ∅2.5 ∅2 0.6 1 handbook, full pagewidth 5.8 0.7 15.3 11 max. 0 −1 4.8 ±0.2 110° ±5° Z stator rotor (2×) 3 0.2 3.1 ±0.3 6.5 ±0.1 1.15 max. 4 ±0.5 11 max. 5 ±0.1 10 0 −0.2 2.5 ∅1.6 DETAIL Z turned 90° 0.85 max. Dimensions in mm. Hole pattern 5 mm × 10 mm; see Fig.6. CCB142 0.6 ±0.1 0.5 ±0.15 Fig.3 Trimmers 2222 808 ..... series, horizontal version. 1998 Mar 27 25 Philips Components Preliminary specification 2222 808 ..... ∅10 mm Film dielectric trimmers 10 5 5 handbook, halfpage R R handbook, halfpage R R 2.5 7.5 1.3 5 S S CCB143 CCB144 1.3 Dimensions in mm. R = rotor, S = stator. The large hole is for bottom adjustment and the diameter is determined by user’s requirements. Dimensions in mm. R = rotor, S = stator. Fig.4 Hole pattern; see Fig.1. Fig.5 Hole pattern; see Fig.2. Adjustment For top adjustment a screwdriver or trimming key can be used; for bottom adjustment a key is required as shown in Fig.7. 10 5 R handbook, halfpage R ∅3 +0.1 0 +0.1 0.7 0 ∅1.7 1.3 5 0.6 S +0.2 0 handbook, halfpage CCB145 2 min. CCB138 Dimensions in mm. R = rotor, S = stator. Dimensions in mm. Fig.6 Hole pattern; see Fig.3. 1998 Mar 27 Fig.7 Bottom adjustment key. 26 Philips Components Preliminary specification 2222 808 ..... ∅10 mm Film dielectric trimmers ORDERING INFORMATION Table 1 Selection chart CATALOGUE NUMBER 2222 808 ..... HORIZONTAL VERSION Cmin /Cmax (pF) HOLE PATTERN 5 mm × 10 mm ROUND HEAD HEX HEAD VERTICAL VERSION HOLE PATTERN 5 mm × 10 mm ROUND HEAD TOP AND BOTTOM ADJUSTMENT HEX. HEAD HOLE PATTERN 7.5 mm × 5 mm ROUND HEAD HEX. HEAD ROUND HEAD TOP ADJUSTMENT TOP AND BOTTOM ADJUSTMENT 2.5/15 61159 − 31159 − 32159 − − 3/22.5 61229 − 31229 − 32229 − − 5.5/40 61409 − 31409 − 32409 − − 5.5/50 − − 01029 − 01006 − − 5.5/65 61659 64659 31659 34659 32659 − 01001 6/80 61809 64809 31809 34809 32809 35809 − 7/105 61101 64101 31101 − 32101 − − 6/120 − − 31121 − − − − MOUNTING PACKAGING The trimmer can be mounted on printed-circuit boards with a grid of 2.50 mm or 2.54 mm and a minimum hole diameter of 1.25 mm. For hole patterns see Figs 4, 5 and 6. Bulk packaged in cardboard boxes lined with expanded plastic. For smallest packaging quantities (SPQ) see Table 2. 1998 Mar 27 27 Electrical characteristics and catalogue numbers GUARANTEED MAX. Cmin / SHAPE MIN. Cmax SPINDLE OF FIG. at 200 kHz HEAD (pF) 2.5/15 vertical round horizontal 3/22.5 vertical round horizontal 5.5/40 vertical round horizontal 5.5/50 vertical round 28 5.5/65 6/80 1 MHz 100 MHz TEMP. COEFF. (10−6/K) MIN. fres COL. at Cmax OF SPQ (MHz) BASE top + bottom PP ≤10 ≤25 −200 ±700 420 blue top + bottom PP ≤10 ≤25 −200 ±700 200 green top + bottom PP ≤10 ≤25 −200 ±400 200 grey top + bottom PTFE ≤10 ≤25 −200 ±400 170 yellow PP ≤10 ≤25 −200 ±500 170 yellow top + bottom PC ≤70 − −50 ±400 170 red top + bottom PC ≤70 − −50 ±400 170 violet top + bottom PC ≤70 − −50 ±400 170 violet top top + bottom 800 800 700 800 800 700 800 800 700 800 800 800 800 800 700 700 600 800 700 800 700 700 600 800 800 700 600 800 CATALOGUE NUMBER 2222 808 31159 2222 808 32159 2222 808 61159 2222 808 31229 2222 808 32229 2222 808 61229 2222 808 31409 2222 808 32409 2222 808 61409 2222 808 01029 2222 808 01006 2222 808 01001 2222 808 31659 2222 808 32659 2222 808 34659 2222 808 61659 2222 808 64659 2222 808 31809 2222 808 34809 2222 808 32809 2222 808 35809 2222 808 61809 2222 808 64809 2222 808 31101 2222 808 32101 2222 808 61101 2222 808 64101 2222 808 31121 Preliminary specification 6/120 DIEL. 2222 808 ..... ∅10 mm 7/105 round round vertical round hexag. round horizontal hexag. round hexag. vertical round hexag. round horizontal hexag. round vertical round round horizontal hexag. vertical round 1 2 3 1 2 3 1 2 3 1 2 2 1 2 1 3 3 1 1 2 2 3 3 1 2 3 3 2 ADJ. MODE tan δ at Cmax × 10−4 Philips Components Table 2 Film dielectric trimmers 1998 Mar 27 ELECTRICAL DATA Philips Components Preliminary specification 2222 808 ..... ∅10 mm Film dielectric trimmers TESTS AND REQUIREMENTS Table 3 Test procedures and requirements IEC 60418-1 CLAUSE IEC 60068 TEST METHOD TEST PROCEDURE REQUIREMENTS 4.2 method of mounting method A 14 capacitance drift after TC measurement ∆C/C: ≤4.5% for Cmax < 40 pF; ∆C/C: ≤2.5% for Cmax ≥ 40 pF 19 thrust axial thrust of 2 N ∆C/C: ≤0.3% 21 robustness of terminations: 21.1 Ua tensile 1N no damage 21.2 Ub bending 1 cycle no damage 22 Na rapid change of temperature 1 cycle; 0.5 hours at lower and 0.5 hours at upper category temperature ∆C/C: ≤1.5% 23 T soldering: Ta solderability solder bath immersion 3 mm; 235 °C; 2 s good wetting no mechanical damage Tb resistance to heat solder bath: 260 °C; 10 s no mechanical damage 24 Eb impact bump 4000 ±10 bumps; 40 g; 6 ms ∆C/C: ≤0.4%; no mechanical damage 25 Fc vibration frequency 10 to 55 Hz; amplitude 0.35 mm; 1.5 hours ∆C/C: ≤0.8%; no mechanical damage 26 26.1 ∆C/C: ≤3% for Cmax < 80 pF; ∆C/C: ≤6% for Cmax ≥ 80 pF climatic sequence: B dry heat 16 hours at upper category temperature tan δ: ≤15 × 10−4 for Cmax < 80 pF; tan δ: ≤80 × 10−4 for Cmax ≥ 80 pF Rins: ≥10000 MΩ; rotor contact R: ≤10 mΩ 26.2 D damp heat accelerated, first cycle 1 cycle; 24 hours; +40 °C; 95 to 100% RH voltage proof: 300 V for 1 minute 26.3 Aa cold 16 hours; −40 °C visual examination: no mechanical damage damp heat accelerated, remaining cycles 1 cycle; 24 hours; +40 °C; 95 to 100% RH operating torque: 2 to 35 mNm 26.5 1998 Mar 27 29 Philips Components Preliminary specification 2222 808 ..... ∅10 mm Film dielectric trimmers IEC 60418-1 CLAUSE IEC 60068 TEST METHOD 27 Ca TEST damp heat steady state PROCEDURE 21 days; +40 °C; 90 to 95% RH REQUIREMENTS ∆C/C: ≤3% for Cmax < 100 pF; ≤3.5% for Cmax ≥ 100 pF tan δ: ≤20 × 10−4 for Cmax < 80 pF; tan δ: ≤80 × 10−4 for Cmax ≥ 80 pF Rins: ≥10000 MΩ; rotor contact R: ≤10 mΩ voltage proof: 300 V for 1 minute visual examination: no mechanical damage operating torque: 2 to 35 mNm 29 mechanical endurance 10 cycles ∆C/C: ≤1% ∆C/C after axial thrust: ≤0.4%; rotor contact R: ≤10 mΩ voltage proof: 300 V for 1 minute visual examination: no mechanical damage operating torque: 1.5 to 37 mNm 1998 Mar 27 30