ETC 2SC5066Y

Ordering number:EN4509
NPN Epitaxial Planar Silicon Transistor
2SC5069
Low-Frequency General-Purpose Amplifier,
Driver Applications
Package Dimensions
unit:mm
2038A
[2SC5069]
4.5
1.6
1.5
0.4
1.0
2.5
· High current capacity.
· Adoption of MBIT process.
· High DC current gain.
· Low collector-to-emitter saturation voltage.
· High VEBO.
0.5
3
1.5
2
4.25max
Features
1
0.4
3.0
1 : Base
2 : Collector
3 : Emitter
SANYO : PCP
(Bottom view)
0.75
Specifications
Absolute Maximum Ratings at Ta = 25˚C
Parameter
Symbol
Conditions
Ratings
Unit
Collector-to-Base Voltage
VCBO
30
V
Collector-to-Emitter Voltage
VCEO
VEBO
25
V
15
V
IC
2
A
ICP
4
A
Emitter-to-Base Voltage
Collector Current
Collector Current (Pulse)
Base Current
IB
Collector Dissipation
PC
Junction Temperature
Tj
Storage Temperature
Tstg
0.4
A
1.5
W
150
˚C
–55 to +150
˚C
Mounted on ceramic board (250mm2× 0.8mm)
Electrical Characteristics at Ta = 25˚C
Parameter
Symbol
Conditions
Collector Cutoff Current
ICBO
Emitter Cutoff Current
IEBO
VCB=20V, IE=0
VEB=10V, IC=0
DC Current Gain
hFE1
hFE2
VCE=5V, IC=500mA
VCE=5V, IC=1A
fT
VCE=10V, IC=50mA
VCB=10V, f=1MHz
Gain-Bandwidth Product
Output Capacitance
Cob
Ratings
min
800
typ
1500
max
Unit
100
nA
100
nA
3200
600
260
MHz
27
pF
Marking :CU
Any and all SANYO products described or contained herein do not have specifications that can handle
applications that require extremely high levels of reliability, such as life-support systems, aircraft’s
control systems, or other applications whose failure can be reasonably expected to result in serious
physical and/or material damage. Consult with your SANYO representative nearest you before using
any SANYO products described or contained herein in such applications.
SANYO assumes no responsibility for equipment failures that result from using products at values that
exceed, even momentarily, rated values (such as maximum ratings, operating condition ranges,or other
parameters) listed in products specifications of any and all SANYO products described or contained
herein.
SANYO Electric Co.,Ltd. Semiconductor Bussiness Headquaters
TOKYO OFFICE Tokyo Bldg., 1-10, 1 Chome, Ueno, Taito-ku, TOKYO, 110-8534 JAPAN
12599HA (KT)/42894MT (KOTO) BX-0115 No.4509–1/4
2SC5069
Parameter
Collector-to-Emitter Saturation Voltage
Base-to-Emitter Saturation Voltage
Symbol
VCE(sat)
VBE(sat)
Conditions
Ratings
min
typ
max
Unit
IC=1A, IB=20mA
0.15
0.5
V
IC=1A, IB=20mA
0.85
1.2
V
Collector-to-Base Breakdown Voltage
V(BR)CBO IC=10µA, IE=0
30
V
Collector-to-Emitter Breakdown Voltage
V(BR)CEO IC=1mA, RBE=∞
25
V
Emitter-to-Base Breakdown Voltage
V(BR)EBO
ton
15
Turn-ON Time
Strage Time
Fall Time
IE=10µA, IC=0
V
See specified Test Circuit
0.14
µs
tstg
See specified Test Circuit
1.35
µs
tf
See specified Test Circuit
0.1
µs
Switching Time Test Circuit
No.4509–2/4
2SC5069
No.4509–3/4
2SC5069
Specifications of any and all SANYO products described or contained herein stipulate the performance,
characteristics, and functions of the described products in the independent state, and are not guarantees
of the performance, characteristics, and functions of the described products as mounted in the customer's
products or equipment. To verify symptoms and states that cannot be evaluated in an independent device,
the customer should always evaluate and test devices mounted in the customer's products or equipment.
SANYO Electric Co., Ltd. strives to supply high-quality high-reliability products. However, any and all
semiconductor products fail with some probability. It is possible that these probabilistic failures could
give rise to accidents or events that could endanger human lives, that could give rise to smoke or fire,
or that could cause damage to other property. When designing equipment, adopt safety measures so
that these kinds of accidents or events cannot occur. Such measures include but are not limited to protective
circuits and error prevention circuits for safe design, redundant design, and structural design.
In the event that any or all SANYO products(including technical data,services) described or
contained herein are controlled under any of applicable local export control laws and regulations,
such products must not be expor ted without obtaining the expor t license from the authorities
concerned in accordance with the above law.
No part of this publication may be reproduced or transmitted in any form or by any means, electronic or
mechanical, including photocopying and recording, or any information storage or retrieval system,
or otherwise, without the prior written permission of SANYO Electric Co., Ltd.
Any and all information described or contained herein are subject to change without notice due to
product/technology improvement, etc. When designing equipment, refer to the "Delivery Specification"
for the SANYO product that you intend to use.
Information (including circuit diagrams and circuit parameters) herein is for example only ; it is not
guaranteed for volume production. SANYO believes information herein is accurate and reliable, but
no guarantees are made or implied regarding its use or any infringements of intellectual property rights
or other rights of third parties.
This catalog provides information as of January, 1999. Specifications and information herein are subject
to change without notice.
PS No.4509–4/4