ETC 2SC5226-4

Ordering number:EN5032A
NPN Epitaxial Planar Silicon Transistor
2SC5226
VHF to UHF Wide-Band Low-Noise
Amplifier Applications
Features
Package Dimensions
· Low noise : NF=1.0dB typ (f=1GHz).
· High gain : S21e2=12dB typ (f=1GHz).
· High cutoff frequency : fT=7GHz typ.
unit:mm
2059B
0.425
[2SC5226]
0.3
0.2
0.15
3
1
2
0.65 0.65
0.425
2.1
1.250
0 to 0.1
0.3
0.6
0.9
2.0
1 : Base
2 : Emitter
3 : Collector
SANYO : MCP
Specifications
Absolute Maximum Ratings at Ta = 25˚C
Parameter
Symbol
Conditions
Ratings
Unit
Collector-to-Base Voltage
VCBO
20
V
Collector-to-Emitter Voltage
VCEO
VEBO
10
V
2
V
Collector Current
IC
70
mA
Collector Dissipation
PC
Tj
150
mW
Junction Temperature
150
˚C
Storage Temperature
Tstg
–55 to +150
˚C
Emitter-to-Base Voltage
Electrical Characteristics at Ta = 25˚C
Parameter
Symbol
Ratings
Conditions
min
typ
max
Unit
Collector Cutoff Current
ICBO
VCB=10V, IE=0
1.0
µA
Emitter Cutoff Current
IEBO
10
µA
DC Current Gain
60*
Gain-Bandwidth Product
hFE
fT
VEB=1V, IC=0
VCE=5V, IC=20mA
VCE=5V, IC=20mA
5
Output Capacitance
Cob
VCB=10V, f=1MHz
0.75
Reverse Transfer Capacitance
Cre
VCB=10V, f=1MHz
0.5
pF
12
dB
Forward Transfer Gain
Noise Figure
| S21e |2(1) VCE=5V, IC=20mA, f=1GHz
| S21e |2(2) VCE=2V, IC=3mA, f=1GHz
NF
* : The 2SC5226 is classified by 20mA hFE as follows :
9
3
120
90
4
180
7
1.0
135
GHz
1.2
8
VCE=5V, IC=7mA, f=1GHz
60
270*
5
270
pF
dB
1.8
dB
Marking : LN
hFE rank : 3, 4, 5
Any and all SANYO products described or contained herein do not have specifications that can handle
applications that require extremely high levels of reliability, such as life-support systems, aircraft’s
control systems, or other applications whose failure can be reasonably expected to result in serious
physical and/or material damage. Consult with your SANYO representative nearest you before using
any SANYO products described or contained herein in such applications.
SANYO assumes no responsibility for equipment failures that result from using products at values that
exceed, even momentarily, rated values (such as maximum ratings, operating condition ranges,or other
parameters) listed in products specifications of any and all SANYO products described or contained
herein.
SANYO Electric Co.,Ltd. Semiconductor Bussiness Headquaters
TOKYO OFFICE Tokyo Bldg., 1-10, 1 Chome, Ueno, Taito-ku, TOKYO, 110-8534 JAPAN
22299TS (KOTO) TA-0079 No.5032–1/5
DC Current Gain,hFE
Gain Bandwidth Product, fT – GHz
2SC5226
Collector Current, IC – mA
Output Capacitance, Cob – pF
Reverse Transfer Capacitance, Cre – pF
Collector Current, IC – mA
Collector-to-Base Voltage, VCB – V
Noise Figure, NF – dB
Forward Transfer Gain, S21e2 – dB
Collector-to-Base Voltage, VCB – V
Collector Current, IC – mA
Collector Dissipation, PC – mW
Collector Current, IC – mA
Ambient Temperature, Ta – °C
No.5032–2/5
2SC5226
S Parameters
No.5032–3/5
2SC5226
S parameters (Common emitter)
VCE=5V, IC=7mA, ZO=50Ω
Freq (MHz)
| S11 |
∠ S11
| S21 |
∠ S21
| S12 |
∠ S12
| S22 |
∠ S22
100
0.720
–46.0
17.973
148.5
0.030
68.5
0.880
–23.6
200
0.612
–80.9
13.927
127.3
0.047
57.1
0.697
–37.6
400
0.497
–121.3
8.656
105.0
0.066
51.3
0.479
–47.6
600
0.456
–143.5
6.080
92.8
0.079
52.9
0.382
–50.5
800
0.440
–157.6
4.725
84.3
0.094
55.4
0.339
–51.8
1000
0.436
–167.5
3.864
77.0
0.110
56.8
0.323
–53.4
1200
0.434
–176.1
3.258
70.3
0.126
57.9
0.312
–55.8
1400
0.433
176.6
2.847
64.5
0.143
58.4
0.304
–58.3
1600
0.433
170.9
2.329
57.4
0.160
58.9
0.296
–62.0
1800
0.434
165.0
2.252
54.2
0.178
58.6
0.293
–65.0
2000
0.439
159.6
2.057
49.2
0.197
58.1
0.294
–68.1
∠ S11
| S21 |
∠ S21
| S12 |
∠ S12
| S22 |
∠ S22
VCE=5V, IC=20mA, ZO=50Ω
Freq (MHz)
| S11 |
100
0.481
–78.8
29.795
132.9
0.022
63.9
0.707
–38.2
200
0.420
–119.2
19.008
112.2
0.033
60.8
0.470
–51.1
400
0.391
–151.6
10.416
95.4
0.052
64.7
0.296
–55.3
600
0.386
–166.4
7.084
86.6
0.071
67.2
0.236
–56.1
800
0.381
–175.9
5.407
80.1
0.092
68.4
0.213
–56.6
1000
0.382
178.2
4.401
74.1
0.114
67.8
0.208
–57.9
1200
0.385
172.1
3.701
68.5
0.134
66.8
0.204
–60.7
1400
0.388
166.7
3.217
63.6
0.156
65.6
0.202
–63.5
1600
0.390
162.1
2.839
58.8
0.176
64.0
0.199
–67.9
1800
0.391
156.7
2.534
54.3
0.197
62.4
0.197
–71.2
2000
0.394
152.1
2.319
50.1
0.219
60.6
0.197
–74.2
VCE=2V, IC=3mA, ZO=50Ω
Freq (MHz)
| S11 |
∠ S11
| S21 |
∠ S21
| S12 |
∠ S12
| S22 |
∠ S22
100
0.858
–32.4
9.413
157.2
0.040
72.6
0.945
–16.5
200
0.782
–60.7
8.187
138.5
0.070
59.2
0.833
–29.3
400
0.653
–101.1
5.855
113.8
0.101
44.5
0.637
–43.2
600
0.588
–126.5
4.337
98.4
0.114
39.1
0.515
–50.0
800
0.557
–143.7
3.444
87.7
0.122
38.0
0.454
–53.8
1000
0.543
–156.3
2.871
78.5
0.130
38.6
0.426
–57.1
1200
0.536
–166.8
2.446
70.5
0.137
40.3
0.407
–60.3
1400
0.533
–175.5
2.145
63.5
0.146
42.5
0.393
–63.8
1600
0.527
177.0
1.904
57.1
0.155
45.0
0.382
–68.0
1800
0.525
170.3
1.714
51.7
0.168
47.3
0.379
–72.0
2000
0.528
163.8
1.564
45.9
0.183
49.2
0.378
–75.8
No.5032–4/5
2SC5226
Specifications of any and all SANYO products described or contained herein stipulate the performance,
characteristics, and functions of the described products in the independent state, and are not guarantees
of the performance, characteristics, and functions of the described products as mounted in the customer's
products or equipment. To verify symptoms and states that cannot be evaluated in an independent device,
the customer should always evaluate and test devices mounted in the customer's products or equipment.
SANYO Electric Co., Ltd. strives to supply high-quality high-reliability products. However, any and all
semiconductor products fail with some probability. It is possible that these probabilistic failures could
give rise to accidents or events that could endanger human lives, that could give rise to smoke or fire,
or that could cause damage to other property. When designing equipment, adopt safety measures so
that these kinds of accidents or events cannot occur. Such measures include but are not limited to protective
circuits and error prevention circuits for safe design, redundant design, and structural design.
In the event that any or all SANYO products(including technical data,services) described or
contained herein are controlled under any of applicable local export control laws and regulations,
such products must not be expor ted without obtaining the expor t license from the authorities
concerned in accordance with the above law.
No part of this publication may be reproduced or transmitted in any form or by any means, electronic or
mechanical, including photocopying and recording, or any information storage or retrieval system,
or otherwise, without the prior written permission of SANYO Electric Co., Ltd.
Any and all information described or contained herein are subject to change without notice due to
product/technology improvement, etc. When designing equipment, refer to the "Delivery Specification"
for the SANYO product that you intend to use.
Information (including circuit diagrams and circuit parameters) herein is for example only ; it is not
guaranteed for volume production. SANYO believes information herein is accurate and reliable, but
no guarantees are made or implied regarding its use or any infringements of intellectual property rights
or other rights of third parties.
This catalog provides information as of February, 1999. Specifications and information herein are subject
to change without notice.
PS No.5032–5/5