Meggitt Citec Elastomer Sealed Trimmer SMD 9 3mm semi-sealed potentiometer Key features tiny 3mm square size • suited to dip and wave solder • latest cermet technology • SMD Trimmers suitable for solvent washing • delta terminals prevent solder bridging • type 3203 series super thin - only 2mm high • attractively priced • Consuming just 10.5mm2 of packed in standard 12mm tape • board, the 3203 has been developed specifically for a new generation of hand held equipment, where mixed Specification Electrical Resistance Range: Resistance Tolerance: Temperature Coefficient: Operating Voltage: Contact Resistance Variation: Power Rating: Effective Electrical Angle: 100R to 1M (1, 2, 5 in each decade) ± 25% ± 250ppm/°C at -20°C to +85°C 15V DC or AC RMS maximum 5% of nominal maximum 0.05 watts at 70°C 260° ± 20° Mechanical Rotational Torque: Mechanical Adjustment: 2 - 17mNm Continuous Environmental Temperature Range: Rotational Life: Load Life: Sealing: -20°C to + 85°C After 10 cycles R < ± 15% R < 5% after 500 hours For dip and wave solder, prior to adjustment technology and double sided component placement are unavoidable. These 3mm devices are just 2mm high and sealed for IR, vapour phase and full immersion wave soldering together with solvent board washing process. Dimensions Packaging: 1000 Pieces (7" Reel) How to Order 3203 X Common Part Orientation 3203 - 3mm Single Turn Trimmer X - Terminals 1 & 3 away from sprocket holes 102 P Resistance Value Tolerance The first two digits are significant figures of resistance value and the third one denotes the number of zeros following Example 1K :102 10K :103 100K:104 P - ± 25% Please Request Full Data Sheet F0710 MEGGITT ELECTRONIC COMPONENTS