MICROCIRCUIT DATA SHEET Original Creation Date: 01/07/98 Last Update Date: 01/22/98 Last Major Revision Date: 01/07/98 CN54F86-X REV 0A0 QUAD 2-INPUT EXCLUSIVE OR GATE General Description This device contains four indepentent gates, each of which performs the logic exclusive-OR function. Industry Part Number NS Part Numbers 54F86 54F86DC Prime Die M086 Processing Subgrp Description (blank) 1 2 3 4 5 6 7 8A 8B 9 10 11 Quality Conformance Inspection (blank) 1 Static tests at Static tests at Static tests at Dynamic tests at Dynamic tests at Dynamic tests at Functional tests at Functional tests at Functional tests at Switching tests at Switching tests at Switching tests at Temp ( oC) +25 +70 0 +25 +70 0 +25 +70 0 +25 +70 0 MICROCIRCUIT DATA SHEET CN54F86-X REV 0A0 (Absolute Maximum Ratings) (Note 1) Storage Temperature -65 C to +150 C Ambient Temperature under Bias -55 C to +125 C Junction Temperature under Bias -55 C to +175 C Vcc Pin Potential to Ground Pin -0.5V to +7.0V Input Voltage (Note 2) -0.5V to +7.0V Input Current (Note 2) -30 mA to +5.0mA Voltage Applied to Output in HIGH State (with Vcc=0V) Standard Output TRI-STATE Output Current Applied to Output in LOW State (Max) -0.5V to Vcc -0.5V to +5.5V twice the rated Iol(mA) Note 1: Note 2: Absolute Maximum ratings are those values beyond which the device may be damaged or have its useful life impaired. Functional operation under these conditions is not implied. Either voltage limit or current limit is sufficient to protect inputs. Recommended Operating Conditions Free Air Ambient Temperature 0 C to +70 C Supply Voltage +4.5V to +5.5V 2 MICROCIRCUIT DATA SHEET CN54F86-X REV 0A0 Electrical Characteristics DC PARAMETER (The following conditions apply to all the following parameters, unless otherwise specified.) DC: VCC 4.5V to 5.5V, Temp range: 0 C to +70 C SYMBOL PARAMETER CONDITIONS NOTES PINNAME MIN MAX UNIT SUBGROUPS IIH Input High Current VCC=5.5V, VM=2.7V, VINL=0.0V 1, 2 INPUTS 5.0 uA 1, 2, 3 IBVI Input High Current VCC=5.5V, VM=7.0V, VINL=0.0V 1, 2 INPUTS 7.0 uA 1, 2, 3 IIL Input LOW Current VCC=5.5V, VM=0.5V 1, 2 INPUTS -0.6 mA 1, 2, 3 VOL Output LOW Voltage VCC=4.5V, VIH=2.0V, IOL=20mA 1, 2 OUTPUTS 0.5 V 1, 2, 3 VOH Output HIGH Voltage VCC=4.5V, VIL=0.8V, IOH=-1.0mA, VIH=2.0V 1, 2 OUTPUTS 2.5 V 1, 2, 3 VCC=4.75V, VIL=0.8V, IOH=-1.0mA, VIH=2.0V 1, 2 OUTPUTS 2.7 V 1, 2, 3 IOS Short Circuit Current VCC=5.5V, VINL=0.0V, VINH=5.5V, VM=0.0V 1, 2 OUTPUTS -60 -150 mA 1, 2, 3 VCD Input Clamp Diode Voltage VCC=4.5V, IM=-18mA 1, 2 INPUTS -1.2 V 1, 2, 3 ICCH Supply Current VCC=5.5V, VINL=0.0V, VINH=5.5V 1, 2 VCC 18 mA 1, 2, 3 ICCL Supply Current VCC=5.5V, VINH=5.5V 1, 2 VCC 28 mA 1, 2, 3 ICEX Output HIGH Leakage Current VCC=5.5V, VINH=5.5V, VINL=0.0V, VM=5.5V 1, 2 OUTPUTS 100 uA 1, 2, 3 VID Input Leakage Test VCC=0V, IID=1.9uA 1, 2 INPUTS V 1, 2, 3 IOD Output Leakage Circuit Current VCC=0V, VIOD=0.15V 1, 2 OUTPUTS 4.75 uA 1, 2, 3 VIL Input Low Voltage Recognized as a LOW signal 3 INPUTS 0.8 V 1, 2, 3 VIH Input High Voltage Recognized as a HIGH signal 3 INPUTS V 1, 2, 3 3 4.75 2.0 MICROCIRCUIT DATA SHEET CN54F86-X REV 0A0 Electrical Characteristics AC PARAMETER (The following conditions apply to all the following parameters, unless otherwise specified.) AC: CL=50pf, RL=500 OHMS, TR=2.5ns, TF=2.5ns SYMBOL tpLH(1) tpHL(1) tpLH(2) tpHL(2) PINNAME CONDITIONS NOTES Propagation Delay An/Bn to On (UNUSED LOW) VCC=5.0V @25C, VCC=4.5V & 5.5V @ 0C / +70C 1, 2 3.0 5.5 ns 9 1, 2 3.0 6.5 ns 10, 11 Propagation Delay An/Bn to On (UNUSED LOW) VCC=5.0V @25C, VCC=4.5V & 5.5V @ 0C / +70C 1, 2 3.0 5.5 ns 9 1, 2 3.0 6.5 ns 10, 11 Propagation Delay An/Bn to On (UNUSED HIGH) VCC=5.0V @25C, VCC=4.5V & 5.5V @ 0C / +70C 1, 2 3.5 7.0 ns 9 1, 2 3.5 8.0 ns 10, 11 Propagation Delay An/Bn to On (UNUSED HIGH) VCC=5.0V @25C, VCC=4.5V & 5.5V @ 0C / +70C 1, 2 3.0 6.5 ns 9 1, 2 3.0 7.5 ns 10, 11 Note 1: Note 2: Note 3: MIN MAX UNIT SUBGROUPS PARAMETER Screen tested 100% on each device at +75C temperature, subgroups 2, 8A & 10. Sample tested (Method 5005, Table 1) on each MFG. lot at +75C temperature, subgroups 2, 8A & 10. Guaranteed by applying specific input condition and testing VOL & VOH. 4 MICROCIRCUIT DATA SHEET CN54F86-X REV 0A0 Revision History Rev ECN # 0A0 M0002716 01/22/98 Rel Date Originator Changes Donald B. Miller Initial MDS Release, revision 0A0. 5