B07 Miniature Series 07 General Purpose Filter/Regulator 1/8" and 1/4" Port Sizes ● Compact design ● Full flow gauge ports ● Low torque, non-rising adjusting knob ● Snap action knob locks pressure setting when pushed in ● Standard relieving models allow reduction of outlet pressure even when the system is dead-ended ● Protects air operated devices by removing liquid and solids contaminants ● Screw-on bowl reduces maintenance time ● Can be disassembled without the use of tools or removal from the air line Technical Data Fluid: Compressed air Maximum pressure: Transparent bowl: 10 bar (145 psig) Metal bowl: 17 bar (250 psig) Operating temperature:* Transparent bowl: -20° to +50°C (0° to +125°F) Metal bowl: -20° to +65°C (0° to +150°F) Ordering Information See Ordering Information on the following pages. * Air supply must be dry enough to avoid ice formation at temperatures below +2°C (+35°F) Particle removal: 5 µm or 40 µm filter element Air quality: Within ISO 8573-1, Class 3 and Class 5 (particulates) Typical flow at 10 bar (100 psig) inlet pressure, 6,3 bar (90 psig) set ISO Symbols pressure and a droop of 1 bar (15 psig) from set: 1/8" Ports: 6 dm3/s (13 scfm) with 5 µm element 1/4" Ports: 6 dm3/s (13 scfm) with 5 µm element Nominal bowl size: 31 ml (1 oz) Gauge ports: 1/8" PTF with PTF main ports Automatic Drain 1/8" ISO Rc with ISO Rc main ports Relieving 1/8" ISO Rc with ISO G main ports Drain connection: 1/8" pipe Automatic drain operation: Spitter type drain operates momentarily when a rapid change in air flow occurs or when the supply pressure is reduced. Materials: Body: Zinc Automatic Drain Bonnet: Acetal Non-relieving Valve: Brass/nitrile Valve seat: Acetal Bowl: Transparent: Polycarbonate Metal: Zinc Element: Sintered polypropylene Elastomers: Nitrile 1/97 Our policy is one of continuous research and development. We reserve the right to amend, without notice, the specifications given in this document. Manual Drain Relieving Manual Drain Non-relieving N/AL.8.300.300.01 B07 Typical Performance Characteristics PORT SIZE: 1/4" RANGE: 0,3 to 7 bar (5 to 100 psi) ELEMENT: 40 µm bar g psig FLOW CHARACTERISTICS INLET PRESSURE: 10 bar g (145 psig) 8 OUTLET PRESSURE 100 6 80 60 4 40 2 20 0 0 0 2 0 4 4 8 6 8 12 16 10 20 dm3/s 24 scfm AIR FLOW Ordering Information. Models listed include ISO G threads, transparent bowl, relieving diaphragm, automatic drain, 40 µm element, 0,3 to 7 bar (5 to 100 psig) outlet pressure adjustment range* . Port Size G1/8 G1/4 Flow† dm3/s (scfm) 6,2 dm3/s (13) 6,5 dm3/s (14) Model Number B07-101-A3KG B07-201-A3KG Weight kg (lbs) 0,26 (0.57) 0,26 (0.57) † Typical flow with 7 bar (100 psig) inlet pressure, 6,3 bar (90 psig) set pressure and a 1 bar (14.5 psig) droop from set. Alternative Models B 0 7 - ★ ★ ★- ★ ★ ★ ★ Port Size 1/8" 1/4" Bowl Transparent Transparent Metal Metal Metal Metal Substitute 1 2 Relief Type Relieving Non-relieving Relieving Non-relieving Relieving Non-relieving Gauge Without Without Without Without Without Without Substitute 01 03 33 35 05** 07** * Outlet pressure can be adjusted to pressures in excess of, and less than, those specified. Do not use these units to control pressures outside of the specified ranges. ** When specifying 10 bar (145 psig) unit, eg. B07-205-A3MG, also note correct code at 5th and 6th digits. Threads PTF ISO Rc taper ISO G parallel Substitute A B G Outlet Pressure Adjustment Ranges* 0.1 to 0.7 bar (1 to 10 psig) 0.3 to 3.5 bar (5 to 50 psig) 0.3 to 7 bar (5 to 100 psig) 0.3 to 10 bar (5 to 145 psig) Substitute A E K M** Element 5 µm 40 µm Substitute 1 3 Drain Automatic Manual Substitute A M Accessories Wall Mounting Bracket and Panel Nut for P1H Unit Plastic: 18-025-003 N/AL.8.300.300.02 Panel Nut Tamper Resistant Field Modification Ø 40 mm Pressure Gauge R1/8 Connection 1/8"PTF Connection Plastic: 2962-89 Metal: 2962-04 Knob and screw: 18-001-092 Screw only: 6097-08 2 bar (30 psig): 4 bar (60 psig): 10 bar (150 psig): 25 bar (350 psig): — 18-013-990 18-013-989 18-013-908 18-013-214 18-013-211 18-013-212 — Our policy is one of continuous research and development. We reserve the right to amend, without notice, the specifications given in this document. 1/97 B07 Dimensions mm (inches) 41 (1.63) 54 (2.13) 38 (1.50) Panel mounting hole diameter 30 mm (1.19") Panel thickness 0 to 6 mm (0 to 0.25") 38 (1.50) 68 (2.67) 28 (1.12) 160 (6.29) 210 (8.26)* 164 (6.44) 214 (8.41)* 68 (2.67) 28 (1.1) 28 (1.12) 28 (1.1) Automatic Drain Manual Drain * Minimum clearance to remove bowl Bracket Mounting Bracket Kit Reference Use 3mm (1/8") screws to mount bracket to wall. Part Number 18-025-003 63 (2.47) 28 to 44 (1.09 to 1.73) Item All models 38 (1.50) 24 (0.93) 46 (1.81) 6 (0.22) 38 (1.49) 7 (0.29) Service Kits Item Type Relieving models, 40 µm element Service kit Non-relieving models, 40 µm element Manual Replacement drains Automatic Part number 3820-14 3820-13 773-03 3654-02 Service kit includes slip ring, diaphragm, valve seat with o-ring, valve, valve spring, element, element gasket, and bowl o-ring. 1/97 Our policy is one of continuous research and development. We reserve the right to amend, without notice, the specifications given in this document. N/AL.8.300.300.03 B07 Warning These products are intended for use in industrial compressed air systems only. Do not use these products where pressures and temperatures can exceed those listed under ‘Technical Data’. Before using these products with fluids other than those specified, for non-industrial applications, life-support systems, or other applications not within published specifications, consult NORGREN. Through misuse, age, or malfunction, components used in fluid power systems can fail in various modes. The system designer is warned to consider the failure modes of all component parts used in fluid power systems and to provide adequate safeguards to prevent personal injury or damage to equipment in the event of such failure. System designers must provide a warning to end users in the system instructional manual if protection against a failure mode cannot be adequately provided. System designers and end users are cautioned to review specific warnings found in instruction sheets packed and shipped with these products. Water vapor will pass through these units and will condense into liquid if air temperature drops in the downstream system. Install an air dryer if water condensation could have a detrimental effect on the application. N/AL.8.300.300.04 Our policy is one of continuous research and development. We reserve the right to amend, without notice, the specifications given in this document. 1/97