10/100BASE-T SINGLE PORT TRANSFORMER MODULES With Various Transmit Turns Ratios Meets all IEEE 802.3 and ANSI X3.263 standards including 350 µH OCL with 8 mA bias Designed for use with transceivers from AMD, Kendin Semiconductor, and Quality Semiconductor IC grade transfer-molded package suitable for reflow soldering temperatures up to 235°C Patented Interlock base construction for high reliability Electrical Specifications @ 25°C — Operating Temperature 0°C to 70°C Part Number H1013 H1015 H1033 H1035 H1043 H1081 H1093 H1119 Turns Ratio (±5%) Receive 1:1 1:1 1:1 1:1 1:1 1:1 1:1 1:1 Transmit 2:1 2:1 2:1 2:1 1.25:1 1: 2 2:1 1: 2 Insertion Loss 100 KHz-100 MHz (dB MAX) Return Loss (db MIN) 30 MHz -16 -16 -16 -16 -16 -18 -16 -16 -1.0 -1.0 -1.0 -1.0 -1.0 -2.0 -1.0 -2.0 Crosstalk (dB MIN) 60 MHz -12 -12 -12 -12 -12 -12 -12 -11 80 MHz -10 -10 -10 -10 -10 -11 -10 -10 30 MHz -45 -45 -45 -45 -45 -45 -45 -45 60 MHz -38 -38 -38 -38 -38 -38 -38 -38 Hipot (Vrms MIN) 100 MHz -34 -34 -34 -34 -34 -34 -34 -34 1500 1500 1500 1500 1500 1500 1500 1500 U.S. Patent No. 5,015,981 NOTE: The H1093 has been optimized for use with the Kendin KS8761. Mechanical H1013, H1015, H1033, H1035, H1043, H1081, H1093, H1119 .700 17,78 H1XXX Date Code Country of Origin .395 .500 10,03 12,70 .040 1,02 Suggested Pad Layout 1.000 ± .005 25,40 0,13 .230 5,84 Dimensions: Inches mm Unless otherwise specified, all tolerances are ± .010 0,25 .540 13,72 .100 2,54 .018 TYP 0,46 NOTE .004/0,10 16 SURFACES .100 2,54 .100 TYP 2,54 .700 17,78 .005 0,13 0°-8° .025 MIN 0,64 NOTE: Pin 4 is omitted on the H1015. U.S: 619 674 8100 • U.K: 44 1483 401700 • France: 33 3 84 35 04 04 • Taiwan: 886 2 2698 0228 • Singapore: 65 287 8998 • http://www.pulseeng.com PRELIMINARY H314.P (4/99) 10/100BASE-T SINGLE PORT TRANSFORMER MODULES With Various Transmit Turns Ratios Schematics H1015 H1013, H1033, H1043, H1093 H1035, H1081, H1119 TRANSMIT 3 11 8 3 2 6 2 9 7 5 3 10 1 7 1 11 12 RECEIVE RECEIVE RECEIVE 6 7 12 15 11 15 14 10 14 12 14 15 16 10 16 16 2 TRANSMIT TRANSMIT 1 5 6 NOTE: The H1081 incorporates an autotransformer, so there is no connection to the TX transformer center tap. Tape and Reel Specifications o .059 1,50 .157 3,99 .079 2,01 .004 0,10 .000 0,00 .069 1,75 .795 20,19 .740 18,80 5 MAX. DRAFT ANGLE 8 1.59 1.73 .012 40,39 43,94 0,30 1.13 28,70 .945 24,00 .230 5,84 .270 6,86 Weight . . . . . . . . . . .3.00 grams Tape & Reel . . . . . . . . .350/reel Tube . . . . . . . . . . . . . . .20/tube NOTE: Modules are packaged in tubes, unless Tape & Reel is specified. Please add the suffix “T” such as H1013T for Tape & Reel orders. For More Information : Corporate (U.S.A.) U.K. (Northern Europe) France (Southern Europe) Taiwan (Northern Asia) Singapore (Southern Asia) 12220 World Trade Drive San Diego, CA 92128 Tel: 619 674 8100 FAX: 619 674 8262 Quick-Facts: 619 674 9672 http://www.pulseeng.com 1 & 2 Huxley Road The Surrey Research Park Guildford, Surrey GU2 5RE United Kingdom Tel: 44 1483 401700 FAX: 44 1483 401701 Zone Industrielle F-39270 Orgelet France Tel: 33 3 84 35 04 04 FAX: 33 3 84 25 46 41 3F-4, No. 81, Sec. 1 HsinTai Wu Road Hsi-Chih, Taipei Hsien Taiwan Tel: 886 2 2698 0228 FAX: 886 2 2698 0948 150 Kampong Ampat #07-01/02 KA Centre Singapore 368324 Tel: 65 287 8998 FAX: 65 280 0080 Distributor Performance warranty of products offered on this data sheet is limited to the parameters specified. Data is subject to change without notice. Other brand and product names mentioned herein may be trademarks or registered trademarks of their respective owners. Printed on recycled paper. ©1999, Pulse Engineering, Inc. PRELIMINARY H314.P (4/99)