MICROCIRCUIT DATA SHEET Original Creation Date: 09/26/97 Last Update Date: 07/30/99 Last Major Revision Date: 09/26/97 MV54ACT109-X REV 0A0 Dual JK Positive Edge-Triggered Flip-Flop General Description The ACT109 consists of two high-speed completely independent transition clocked JK flip-flops. The clocking operation is independent of rise and fall times of the clock waveform. The JK design allows operation as a D flip-flop (refer ACT74 data sheet) by connecting the J and K inputs together. Asynchronous Inputs: LOW input to SD (Set) sets Q to HIGH level LOW input to CD (Clear) sets Q to LOW level Clear and Set are independent of clock. Simultaneous LOW on CD an SD makes both Q and Q HIGH Industry Part Number NS Part Numbers 54ACT109 54ACT109E-QMLV* 54ACT109ERQMLV* 54ACT109J-QMLV** 54ACT109JRQMLV** 54ACT109W-QMLV*** 54ACT109WRQMLV*** Prime Die J109 Controlling Document 5962-88534 Processing Subgrp Description MIL-STD-883, Method 5004 1 2 3 4 5 6 7 8A 8B 9 10 11 Quality Conformance Inspection MIL-STD-883, Method 5005 1 Static tests at Static tests at Static tests at Dynamic tests at Dynamic tests at Dynamic tests at Functional tests at Functional tests at Functional tests at Switching tests at Switching tests at Switching tests at Temp ( oC) +25 C +125 C -55 C +25 C +125 C -55 C +25 C +125 C -55 C +25 C +125 C -55 C MICROCIRCUIT DATA SHEET MV54ACT109-X REV 0A0 Features - Outputs source/sink 24 mA ACT109 has TTL-compatible inputs Standard Military Drawing (SMD) - ACT109: 5962-8853401V2A*, VCA**, VDA*** - ACT109: 5962R8853401V2A*, VCA**, VDA*** 2 MICROCIRCUIT DATA SHEET MV54ACT109-X REV 0A0 (Absolute Maximum Ratings) (Note 1) Supply Voltage (Vcc) -0.5V to +7.0V DC Input Vi = Vi = DC Input Diode Current (Iik) -0.5V Vcc +0.5V Voltage (Vi) -20 mA +20 mA -0.5V to Vcc +0.5V DC Output Diode Current (Iok) Vo = -0.5V Vo = Vcc +0.5V DC Output Voltage (Vo) -20 mA +20 mA -0.5V to Vcc +0.5V DC Output Source or Sink Current (Io) +50 mA DC Vcc or Ground Current per Output Pin (Icc or Ignd) +50 mA Storage Temperature (Tstg) -65 C to +150 C Junction Temperature(Tj) 175 C Thermal Resistance, junction-to-case (jc) See MIL-STD-1835 Maximum Power Dissipation (pd) 500 mW Lead Temperature (soldering, 10 seconds) +300 C Note 1: Absolute maximum ratings are those values beyond which damage to the device may occur. The databook specifications should be met, without exception, to ensure that the system design is reliable over its power supply, temperature and output/input loading variables. National does not recommend operation of FACT TM circuits outside databook specifications. Recommended Operating Conditions Supply Voltage (Vcc) 4.5V to 5.5V Input Voltage (Vi) 0V to Vcc Output Voltage (Vo) 0V to Vcc Operating Temperature (Ta) -55 C to + 125 C Minimum Input Edge Rate (Delta V/Delta t) AC Devices Vin from 0.8V to 2.0V Vcc @ 4.5V, 5.5V Maximum High Level Output Current (Ioh) 125 mV/ns -24 mA Maximum Low Level Output Current (Iol) +24 mA 3 MICROCIRCUIT DATA SHEET MV54ACT109-X REV 0A0 Electrical Characteristics DC PARAMETERS (The following conditions apply to all the following parameters, unless otherwise specified.) DC: VCC 4.5V to 5.5V, Temp. Range: -55C to 125C. SYMBOL IIH IIL VOL PARAMETER High level input Current Low level input Current Low level output Voltage CONDITIONS NOTES VCC=5.5V, VM=5.5V PINNAME MIN MAX UNIT SUBGROUPS 1, 2 INPUT 0.1 uA 1 1, 2 INPUT 1.0 uA 2, 3 1, 2 INPUT -0.1 uA 1 1, 2 INPUT -1.0 uA 2, 3 VCC=4.5V, VIH=2.0V, VIL=0.8V, IOL=50.0uA 1, 2 OUTPUT .10 V 1, 2, 3 VCC=5.5V, VIH=2.0V, VIL=0.8V, IOL=50.0uA 1, 2 OUTPUT .10 V 1, 2, 3 VCC=4.5V, VINH=4.5V, VIH=2.0V, VIL=0.8V, IOL=24.0mA 1, 2 OUTPUT .36 V 1 1, 2 OUTPUT .50 V 2, 3 1, 2 OUTPUT .36 V 1 1, 2 OUTPUT .50 V 2, 3 1.65 V 1, 2, 3 VCC=5.5V, VM=0.0V VCC=5.5V, VINH=5.5V, VIH=2.0V, VIL=0.8V, IOL=24.0mA VIOL Dynamic Output current LOW VCC=5.5V, VINH=5.5V, VIH=2.0V, VIL=0.8V, IOL=50.0mA 1, OUTPUT 2, 5 VOH High Level Output Voltage VCC=4.5V, VIH=2.0V, VIL=0.8V, IOH=-50.0uA 1, 2 OUTPUT 4.40 V 1, 2, 3 VCC=5.5V, VIH=2.0V, VIL=0.8V, IOH=-50.0uA 1, 2 OUTPUT 5.40 V 1, 2, 3 VCC=4.5V, VINH=4.5V VIH=2.0V, VIL=0.8V, IOH=-24.0mA 1, 2 OUTPUT 3.86 V 1 1, 2 OUTPUT 3.70 V 2, 3 1, 2 OUTPUT 4.86 V 1 1, 2 OUTPUT 4.70 V 2, 3 3.85 V 1, 2, 3 VCC=5.5V, VINH=5.5V, VIH=2.0V, VIL=0.8V, IOH=-24.0mA VIOH Dynamic Output Current HIGH VCC=5.5V, VIHN=5.5V, VIH=2.0V, VIL=0.8V, IOH=-50.0mA 1, OUTPUT 2, 5 ICCH Supply Current Outputs HIGH VCC=5.5V, VINL=0.0V 1, 2 VCC 100 nA 1 1, 2 VCC 40 uA 2, 3 1, 2 VCC 100 nA 1 1, 2 VCC 40 uA 2, 3 1, 2 VCC 100 nA 1 1, 2 VCC 40 uA 2, 3 1, 2 VCC 1.0 mA 1 1, 2 VCC 1.6 mA 2, 3 1.50 V 1 ICCL ICCF ICCT VIC+ Supply Current Outputs LOW Supply Current Functional Supply Current per Input Positive Input Clamp Voltage VCC=5.5V, VINH=5.5V, VINL=0.0V VCC=5.5V, VINH=5.5V, VINL=0.0V VCC=5.5V, VIHT=VCC-2.1 VCC=0.0V, IM=1.0 mA 8, 9 INPUT 4 0.40 MICROCIRCUIT DATA SHEET MV54ACT109-X REV 0A0 Electrical Characteristics DC PARAMETERS(Continued) (The following conditions apply to all the following parameters, unless otherwise specified.) DC: VCC 4.5V to 5.5V, Temp. Range: -55C to 125C. SYMBOL VIC- PARAMETER Negative Input Clamp Voltage CONDITIONS NOTES VCC=Open, IM=-1.0 mA PINNAME 8, 9 INPUT MIN -0.40 MAX -1.5 UNIT SUBGROUPS V 1 AC PARAMETERS (The following conditions apply to all the following parameters, unless otherwise specified.) AC: CL=50pf, RL=500 OHMS, TRISE=3.0ns, TFALL=3.0ns, Temp Range: -55C to 125C. tpLH(1) tpHL(1) tpLH(2) tpHL(2) Propagation Delay Propagation Delay Propagation Delay Propagation Delay VCC=4.5V VCC=4.5V VCC=4.5V VCC=4.5V 3, CP to 4, 7 Q/Q 1.5 11.0 ns 9 3, CP to 4, 7 Q/Q 1.5 14.0 ns 10, 11 3, CP to 4, 7 Q/Q 1.5 10.0 ns 9 3, CP to 4, 7 Q/Q 1.5 12.0 ns 10, 11 3, CD/SD 4, 7 to Q/Q 1.5 9.5 ns 9 3, CD/SD 4, 7 to Q/Q 1.5 11.5 ns 10, 11 3, CD/SD 4, 7 to Q/Q 1.5 10.0 ns 9 3, CD/SD 4, 7 to Q/Q 1.5 12.5 ns 10, 11 ts(H/L) Setup Time HIGH or LOW VCC=4.5V 6 Jn/Kn to CP 5.5 ns 9, 10, 11 th(H/L) Hold Time HIGH or LOW VCC=4.5V 6 Jn/Kn to CP 2.0 ns 9, 10, 11 tw(H/L) CP Pulse Width VCC=4.5V 6 CP or CD or SD 5.0 ns 9, 10, 11 tw(L) CP Pulse Width VCC=4.5V 6 CD or SD to CP 6.5 ns 9 6 CD or SD to CP 7.0 ns 10, 11 trec Recovery Time VCC=4.5V 6 CD or SD to CP 0.5 ns 9, 10, 11 FMAX Maximum Clock Frequency VCC=4.5V 6 CP 95 MHz 9 6 CP 85 MHZ 10, 11 Note 1: SCREEN TESTED 100% ON EACH DEVICE AT +25C & +125C TEMPERATURE, SUBGROUPS 1, 2, 7, & 8. 5 MICROCIRCUIT DATA SHEET MV54ACT109-X REV 0A0 (Continued) Note 2: Note 3: Note 4: Note Note Note Note Note 5: 6: 7: 8: 9: SAMPLE TESTED (METHOD 5005, TABLE 1) ON EACH MFG. LOT AT +25C, +125C, & -55C TEMPERATURE, SUBGROUPS A1, 2, 3, 7 & 8. SCREEN TESTED 100% ON EACH DEVICE AT +25C TEMPERATURE ONLY, SUBGROUP A9. SAMPLE TESTED (METHOD 5005, TABLE 1) ON EACH MFG. LOT AT +25C, +125C, & -55C TEMPERATURE, SUBGROUPS A9, 10, & 11. TRANSMISSION LINE DRIVING TEST, GUARDBAND LIMITS SET FOR +25C, 2 MSEC DURATION MAX. GUARANTEED BUT NOT TESTED (DESIGN CHARACTERIZATION) MIN LIMITS GUARANTEED FOR 5.5V BY GUARDBANDING 4.5V MIN. LIMITS. SCREEN TESTED 100% ON EACH DEVICE AT +25C TEMPERATURE ONLY, SUBGROUP A1. SAMPLE TESTED (METHOD 5005, TABLE 1) AT +25C TEMPERATURE ONLY, SUBGROUP A1. 6 MICROCIRCUIT DATA SHEET MV54ACT109-X REV 0A0 Revision History Rev ECN # 0A0 M0002546 07/30/99 Rel Date Originator Changes Linda Collins Initial MDS Release 7