IS/ISO 9002 Lic# QSC/L- 000019.2 Continental Device India Limited An IS/ISO 9002 and IECQ Certified Manufacturer PNP SILICON PLANAR EPITAXIAL TRANSISTORS BC212, BC212A, BC212B BC213, BC213A, BC213B, BC213C BC214, BC214B, BC214C TO-92 Plastic Package Silicon Small Signal General Purpose Amplifier ABSOLUTE MAXIMUM RATINGS (Ta=25ºC unless specified otherwise) DESCRIPTION SYMBOL BC212 BC213 BC214 UNITS Collector Emitter Voltage VCEO 50 30 30 V Collector Base Voltage VCBO 60 45 45 V Emitter Base Voltage VEBO 5 V Collector Current Continuous IC 100 mA Power Dissipation @ Ta=25ºC Derate Above 25ºC Power Dissipation @ Tc=25ºC Derate Above 25ºC Operating And Storage Junction Temperature Range PD Tj, Tstg 350 2.8 1 8 -55 to +150 mW mW/ºC W mW/ºC ºC THERMAL RESISTANCE Junction to ambient Rth(j-a) 357 ºC/W Junction to case Rth(j-c) 125 ºC/W Continental Device India Limited PD Data Sheet Page 1 of 4 PNP SILICON PLANAR EPITAXIAL TRANSISTORS BC212, BC212A, BC212B BC213, BC213A, BC213B, BC213C BC214, BC214B, BC214C TO-92 Plastic Package ELECTRICAL CHARACTERISTICS (Ta=25ºC Unless Specified Otherwise) DESCRIPTION SYMBOL TEST CONDITION MIN IC=2mA,IB=0 VCEO Collector Emitter Voltage BC212 50 BC213, BC214 30 VCBO IC=10µA.IE=0 Collector Base Voltage BC212 60 BC213, BC214 45 V I =10µA, I =0 Emitter Base Voltage 5 EBO E C VCB=30V,IE=0 ICBO Collector Cut off Current TYP MAX UNITS V V V V V 15 nA 15 nA Emitter Cut off Current DC Current Gain IEBO VEB=4V, IC=0 BC212, BC213 BC214 BC212 BC213 BC214 BC212, BC214 BC213 Collector Emitter Saturation Voltage hFE IC=10µA,VCE=5V VCE(sat) IC=10mA,IB=0.5mA 120 140 0.10 Base Emitter Saturation Voltage Base Emitter On Voltage VBE(sat) VBE(on) IC=100mA,IB=5mA* IC=100mA,IB=5mA* IC=2mA,VCE=5V 0.6 0.25 1.00 0.62 0.6 1.4 0.72 V V V MIN TYP MAX UNITS 6 MHz MHz MHz pF 10 dB 2 dB IC=2mA,VCE=5V IC=100mA,VCE=5V* ELECTRICAL CHARACTERISTICS (Ta=25ºC Unless Specified Otherwise) DESCRIPTION SYMBOL TEST CONDITION DYNAMICS CHARACTERISTICS Transition Frequency fT IC=10mA, VCE=5V BC212 BC213 f=50MHz BC214 Cob VCB=10V, IE=0 Output Capacitance Noise Figure BC212, BC213 NF IC=200µA, VCE=5V RS=2KW f=1KHz f=200HZ BC214 NF IC=200µA, VCE=5V RS=2KW f=30Hz to 15KHz Small Signal Current Gain | hfe | IC=2mA, VCE=5V BC212 f=1KHZ BC213 BC214 A B C *Pulse Condition: Pulse Width 300us, Duty Cycle 2%. Continental Device India Limited 40 100 60 80 140 Data Sheet 600 V 280 360 320 60 80 140 100 200 350 300 400 600 Page 2 of 4 BC212, BC212A, BC212B BC213, BC213A, BC213B, BC213C BC214, BC214B, BC214C TO-92 Plastic Package TO-92 Plastic Package B Ammo Pack Style Uncontrolled MECHANICAL DATA h P T h (p) A1 LABEL H1 Carrier Strip FLAT SIDE 183 mm A A W2 H0 L Wo W1 W 331m m t1 F1 t 1 F2 F 4 mm2 Do P2 Po K 2 D 3 D A A C 3 2 1 H F F ITEM 3 2 1 SEC AA G PIN CONFIGURATION 1. COLLECTOR 2. BASE 3. EMITTER Flat Side of Transistor and Adhesive Tape Visible 2000 pcs./Ammo Pack All dimensions in mm unless specified otherwise E Beyond 'L' Solderability Ensured D FEE Adhesive Tape on Top Side L Dimension With 'L' TO-92 Transistors on Tape and Ammo Pack DIM MIN. MAX. A B C D 4.32 4.45 3.18 0.41 5.33 5.20 4.19 0.55 E F G H 0.35 0.50 5 DEG 1.14 1.40 1.14 1.53 K L 12.70 1.982 All diminsions in mm. — 2.082 SYMBOL BODY WIDTH BODY HEIGHT BODY THICKNESS PITCH OF COMPONENT FEED HOLE PITCH A1 A T P Po FEED HOLE CENTRE TO COMPONENT CENTRE P2 DISTANCE BETWEEN OUTER LEADS COMPONENT ALIGNMENT TAPE WIDTH HOLD-DOWN TAPE WIDTH HOLE POSITION F h W Wo W1 HOLD-DOWN TAPE POSITION LEAD WIRE CLINCH HEIGHT COMPONENT HEIGHT LENGTH OF SNIPPED LEADS FEED HOLE DIAMETER TOTAL TAPE THICKNESS LEAD - TO - LEAD DISTANCEF1, W2 Ho H1 L Do t F2 CLINCH HEIGHT PULL - OUT FORCE H2 (P) SPECIFICATION REMARKS MIN. NOM. MAX. TOL . 4.0 4.8 5.2 4.8 4.2 3.9 12.7 ±1 12.7 ±0.3 CUMULATIVE PITCH ERROR 1.0 mm/20 PITCH 6.35 ±0.4 TO BE MEASURED AT BOTTOM OF CLINCH +0.6 5.08 -0.2 0 1 AT TOP OF BODY 18 ±0.5 6 ±0.2 9 +0.7 -0.5 0.5 ±0.2 16 ±0.5 23.25 11.0 4 ±0.2 1.2 t1 0.3 - 0.6 2.54 +0.4 -0.1 3 6N NOTES 1. MAXIMUM ALIGNMENT DEVIATION BETWEEN LEADS NOT TO BE GREATER THAN 0.2 mm. 2. MAXIMUM NON-CUMULATIVE VARIATION BETWEEN TAPE FEED HOLES SHALL NOT EXCEED 1 mm IN 20 PITCHES. 3. HOLDDOWN TAPE NOT TO EXCEED BEYOND THE EDGE(S) OF CARRIER TAPE AND THERE SHALL BE NO EXPOSURE OF ADHESIVE. 4. NO MORE THAN 3 CONSECUTIVE MISSING COMPONENTS ARE PERMITTED. 5. A TAPE TRAILER, HAVING AT LEAST THREE FEED HOLES ARE REQUIRED AFTER THE LAST COMPONENT. 6. SPLICES SHALL NOT INTERFERE WITH THE SPROCKET FEED HOLES. Packing Detail PACKAGE TO-92 Bulk TO-92 T&A STANDARD PACK Details Net Weight/Qty 1K/polybag 200 gm/1K pcs 2K/ammo box 645 gm/2K pcs Continental Device India Limited INNER CARTON BOX Size Qty 3" x 7.5" x 7.5" 5K 12.5" x 8" x 1.8" 2K Data Sheet OUTER CARTON BOX Size Qty Gr Wt 17" x 15" x 13.5" 80K 23 kgs 17" x 15" x 13.5" 32K 12.5 kgs Page 3 of 4 Notes BC212, BC212A, BC212B BC213, BC213A, BC213B, BC213C BC214, BC214B, BC214C TO-92 Plastic Package Disclaimer The product information and the selection guides facilitate selection of the CDIL's Discrete Semiconductor Device(s) best suited for application in your product(s) as per your requirement. It is recommended that you completely review our Data Sheet(s) so as to confirm that the Device(s) meet functionality parameters for your application. The information furnished in the Data Sheet and on the CDIL Web Site/CD is believed to be accurate and reliable. CDIL however, does not assume responsibility for inaccuracies or incomplete information. Furthermore, CDIL does not assume liability whatsoever, arising out of the application or use of any CDIL product; neither does it convey any license under its patent rights nor rights of others. These products are not designed for use in life saving/support appliances or systems. CDIL customers selling these products (either as individual Discrete Semiconductor Devices or incorporated in their end products), in any life saving/support appliances or systems or applications do so at their own risk and CDIL will not be responsible for any damages resulting from such sale(s). CDIL strives for continuous improvement and reserves the right to change the specifications of its products without prior notice. CDIL is a registered Trademark of Continental Device India Limited C-120 Naraina Industrial Area, New Delhi 110 028, India. Telephone + 91-11-579 6150 Fax + 91-11-579 9569, 579 5290 www.cdil.com e-mail [email protected] Continental Device India Limited Data Sheet Page 4 of 4