1.5 – 18 GHz Surface Mount Pseudomorphic HEMT Technical Data ATF-36163 Features Surface Mount Package • Low Minimum Noise Figure: 1 dB Typical at 12 GHz 0.6 dB Typical at 4 GHz • Associated Gain: 9.4 dB Typical at 12 GHz 15.8 dB Typical at 4 GHz • Maximum Available Gain: 11 dB Typical at 12 GHz 17 dB Typical at 4 GHz • Low Cost Surface Mount Small Plastic Package • Tape-and-Reel Packaging Option Available SOT-363 (SC-70) Pin Connections and Package Marking • 12 GHz DBS Downconverters • 4 GHz TVRO Downconverters • S or L Band Low Noise Amplifiers 36 SOURCE Applications DRAIN SOURCE GATE SOURCE SOURCE Note: Package marking provides orientation and identification. Additionally, the ATF-36163 has low noise-resistance, which reduces the sensitivity of noise performance to variations in input impedance match. This feature makes the design of broad band low noise amplifiers much easier. The performance of the ATF-36163 makes this device the ideal choice for use in the 2nd or 3rd stage of low noise cascades. The repeatable performance and consistency make it appropriate for use in Ku-band Direct Broadcast Satellite (DBS) TV systems, C-band TV Receive Only (TVRO) LNAs, Multichannel Multipoint Distribution Systems (MMDS), X-band Radar detector and other low noise amplifiers operating in the 1.5 – 18 GHz frequency range. Description The Agilent ATF-36163 is a lownoise Pseudomorphic High Electron Mobility Transistor (PHEMT), in the SOT-363 (SC-70) package. When optimally matched for minimum noise figure, it will provide a noise figure of 1 dB at 12 GHz and 0.6 dB at 4 GHz. This GaAs PHEMT device has a nominal 0.2 micron gate length with a total gate periphery (width) of 200 microns. Proven gold-based metallization system and nitride passivation assure rugged, reliable devices. 2 ATF-36163 Absolute Maximum Ratings[1] Symbol VDS Parameter Drain - Source Voltage Units V Absolute Maximum +3 VGS VGD Gate - Source Voltage Gate Drain Voltage V V -3 -3.5 ID PT Drain Current Total Power Dissipation mA mW Idss 180 Pin max TCH RF Input Power Channel Temperature dBm °C +10 150 TSTG Storage Temperature °C -65 to 150 Thermal Resistance: θch-c = 160° C/W Note: 1. Operation of this device above any one of these parameters may cause permanent damage. ATF-36163 Electrical Specifications TC = 25°C, ZO = 50 Ω, Vds = 1.5 V, Ids = 10 mA, (unless otherwise noted). Symbol Parameters and Test Conditions NF G Noise Figure[1] Gain at NF[1] gm Idss Transconductance Saturated Drain Current Vp 10% BVGDO Pinchoff Voltage Gate Drain Breakdown Voltage Min. Typ. Max. f =12.0 GHz f = 12.0 GHz Units dB dB 1.4[1] 9 1.2 10 VDS = 1.5 V, VGS = 0 V VDS = 1.5 V, VGS = 0 V mS mA 50 15 60 25 V V -1.0 -0.35 VDS = 1.5 V, IDS = 10% of Idss IG = 30 µA 40 -0.15 -3.5 Note: 1. Measured in a test circuit tuned for a typical device. ATF-36163 Typical Parameters TC = 25°C, ZO = 50 Ω, Vds = 2 V, Ids = 15 mA, (unless otherwise noted). Symbol Fmin Ga Parameters and Test Conditions Minimum Noise Figure (Γsource = Γopt) Associated Gain Units Typ. f = 4 GHz f = 12 GHz f = 4 GHz f = 12 GHz dB dB dB dB 0.6 1.0 15.8 9.4 dB dB dBm dBm 17.2 10.9 5 5 V -0.2 Gmax Maximum Available Gain[1] P1dB Output Power at 1 dB Gain Compression under the power matched condition f = 4 GHz f = 12 GHz f = 4 GHz f = 12 GHz VGS Gate to Source Voltage for IDS = 15 mA VDS = 2.0 V Note: 1. Gmax = MAG for K > 1 and Gmax = MSG for K ≤ 1, which is shown on the S-parameters tables. 3 ATF-36163 Typical Scattering Parameters, Common Source, ZO = 50 Ω, VDS = 1.5 V, ID = 10 mA S11 Mag. 0.99 0.98 0.96 0.93 0.87 0.81 0.75 0.67 0.61 0.57 0.57 0.59 0.63 0.67 0.72 0.78 0.82 0.87 0.90 Ang. -11 -22 -42 -61 -83 -106 -131 -158 176 143 108 76 50 26 6 -11 -24 -38 -52 dB 12.85 12.70 12.48 12.37 12.30 12.16 11.94 11.47 11.01 10.47 9.66 8.53 7.39 6.10 4.81 3.49 2.20 0.59 -1.63 S21 Mag. 4.39 4.31 4.21 4.15 4.12 4.06 3.95 3.75 3.55 3.34 3.04 2.67 2.34 2.02 1.74 1.50 1.29 1.07 0.83 Ang. 168 158 138 118 97 76 55 33 12 -10 -32 -54 -74 -93 -111 -128 -146 -164 178 dB -37.72 -31.70 -26.02 -22.73 -20.45 -18.71 -17.52 -16.77 -16.36 -15.97 -15.92 -16.48 -17.14 -18.27 -19.74 -21.41 -23.10 -25.04 -29.12 S12 Mag. 0.01 0.03 0.05 0.07 0.10 0.12 0.13 0.15 0.15 0.16 0.16 0.15 0.14 0.12 0.10 0.09 0.07 0.06 0.04 Note: 1. Gmax = MAG for K > 1 and Gmax = MSG for K ≤ 1. Rn/ZO 0.38 0.32 0.26 0.20 0.15 0.12 0.10 0.07 0.07 0.09 0.13 0.21 0.32 0.44 0.60 0.79 1.15 Gmax[1] dB 25.24 22.26 19.28 17.56 16.38 15.43 14.73 14.12 13.69 13.22 12.80 12.50 10.65 9.64 8.99 8.81 8.70 8.79 8.58 K — 0.11 0.17 0.24 0.33 0.43 0.51 0.58 0.69 0.79 0.85 0.91 0.99 1.07 1.18 1.30 1.38 1.44 1.46 1.80 2.4 24 2.0 20 1.6 16 1.2 12 0.8 8 0.4 4 0 0 2 4 6 0 10 12 14 16 18 8 FREQUENCY (GHz) Figure 1. ATF-36163 Minimum Noise Figure and Associated Gain vs. Frequency for VDS = 1.5 V, ID = 10 mA. 24 20 16 GAIN (dB) Common Source, ZO = 50 Ω, VDS = 1.5 V, ID = 10 mA Freq. Fmin Ga Γopt GHz dB dB Mag. Ang. 2 0.48 18.77 0.78 28 3 0.53 16.75 0.75 41 4 0.57 15.17 0.68 55 5 0.61 14.14 0.60 71 6 0.66 13.23 0.55 88 7 0.71 12.06 0.48 105 8 0.77 11.22 0.38 119 9 0.83 10.50 0.32 138 10 0.89 10.02 0.23 170 11 0.97 9.44 0.18 -141 12 1.05 8.92 0.20 -92 13 1.14 8.45 0.26 -46 14 1.24 8.12 0.36 -16 15 1.37 8.08 0.48 4 16 1.51 8.11 0.59 19 17 1.68 7.97 0.64 34 18 1.89 7.59 0.70 51 Fmin (dB) ATF-36163 Typical Noise Parameters S22 Mag. Ang. 0.51 -9 0.50 -18 0.48 -36 0.45 -53 0.40 -71 0.34 -92 0.27 -116 0.18 -144 0.10 174 0.12 93 0.22 53 0.33 28 0.41 9 0.49 -8 0.56 -22 0.63 -33 0.67 -43 0.73 -53 0.78 -65 Ang. 79 71 55 40 23 6 -12 -30 -45 -61 -77 -93 -106 -119 -129 -138 -144 -151 -159 Ga (dB) Freq. GHz 0.5 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 MSG MAG 12 |S21|2 8 4 0 0 2 4 6 8 10 12 14 16 18 FREQUENCY (GHz) Figure 2. Maximum Available Gain, Maximum Stable Gain & Insertion Power Gain vs. Frequency for VDS = 1.5 V, ID = 10 mA. 4 ATF-36163 Typical Scattering Parameters, Common Source, ZO = 50 Ω, VDS = 1.5 V, ID = 15 mA S11 Mag. 0.99 0.98 0.96 0.92 0.86 0.80 0.74 0.66 0.59 0.56 0.56 0.59 0.63 0.68 0.73 0.79 0.83 0.87 0.91 Ang. -12 -22 -43 -63 -85 -108 -133 -160 173 141 106 74 49 25 5 -12 -25 -38 -53 dB 13.56 13.40 13.16 13.00 12.87 12.68 12.38 11.85 11.33 10.74 9.89 8.74 7.59 6.29 5.01 3.70 2.43 0.84 -1.33 S21 Mag. 4.76 4.68 4.55 4.47 4.40 4.30 4.16 3.91 3.68 3.44 3.12 2.74 2.40 2.06 1.78 1.53 1.32 1.10 0.86 Ang. 168 157 137 116 96 75 53 31 11 -11 -33 -54 -74 -93 -110 -127 -144 -163 180 dB -38.42 -32.40 -26.56 -23.22 -21.01 -19.25 -18.13 -17.39 -16.95 -16.54 -16.42 -16.83 -17.39 -18.42 -19.74 -21.31 -22.85 -24.73 -28.87 S12 Mag. 0.01 0.02 0.05 0.07 0.09 0.11 0.12 0.14 0.14 0.15 0.15 0.14 0.14 0.12 0.10 0.09 0.07 0.06 0.04 Common Source, ZO = 50 Ω, VDS = 1.5 V, ID = 15 mA Freq. Fmin Ga Γopt GHz dB dB Mag. Ang. 2 0.49 18.87 0.84 28 3 0.54 17.20 0.74 42 4 0.58 15.75 0.66 57 5 0.63 14.49 0.59 72 6 0.68 13.61 0.54 90 7 0.73 12.36 0.46 106 8 0.79 11.54 0.37 121 9 0.85 10.82 0.30 140 10 0.91 10.32 0.21 174 11 0.99 9.73 0.17 -133 12 1.07 9.22 0.20 -83 13 1.17 8.68 0.26 -40 14 1.27 8.41 0.38 -12 15 1.40 8.36 0.49 7 16 1.54 8.37 0.60 21 17 1.72 8.10 0.62 35 18 1.93 8.00 0.71 52 Rn/ZO 0.38 0.31 0.25 0.19 0.15 0.11 0.09 0.08 0.08 0.10 0.14 0.22 0.34 0.46 0.64 0.85 1.18 Ang. 79 71 56 40 24 7 -11 -28 -42 -58 -73 -88 -102 -115 -124 -133 -139 -148 -155 Gmax[1] dB 25.82 22.86 19.87 18.13 16.94 15.98 15.25 14.62 14.14 13.63 13.16 11.78 10.62 9.72 9.15 8.99 8.93 9.06 8.92 K — 0.12 0.18 0.26 0.35 0.46 0.55 0.62 0.74 0.84 0.90 0.95 1.03 1.10 1.19 1.29 1.35 1.39 1.39 1.67 2.4 24 2.0 20 1.6 16 1.2 12 0.8 8 0.4 4 0 0 2 4 6 8 0 10 12 14 16 18 FREQUENCY (GHz) Figure 3. ATF-36163 Minimum Noise Figure and Associated Gain vs. Frequency for VDS = 1.5 V, ID = 15 mA. 24 20 16 GAIN (dB) ATF-36163 Typical Noise Parameters Fmin (dB) Note: 1. Gmax = MAG for K > 1 and Gmax = MSG for K ≤ 1. S22 Mag. Ang. 0.45 -9 0.45 -18 0.43 -36 0.40 -52 0.35 -70 0.28 -92 0.21 -116 0.13 -146 0.06 156 0.12 73 0.23 44 0.34 23 0.42 6 0.50 -10 0.57 -23 0.64 -34 0.68 -44 0.73 -54 0.78 -66 Ga (dB) Freq. GHz 0.5 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 MSG 12 MAG |S21|2 8 4 0 0 2 4 6 8 10 12 14 16 18 FREQUENCY (GHz) Figure 4. Maximum Available Gain, Maximum Stable Gain & Insertion Power Gain vs. Frequency for VDS = 1.5 V, ID = 15 mA. 5 ATF-36163 Typical Scattering Parameters, Common Source, ZO = 50 Ω, VDS = 2.0 V, ID = 10 mA S11 Mag. Ang. 0.99 -11 0.99 -22 0.96 -42 0.93 -62 0.87 -83 0.81 -106 0.75 -131 0.67 -157 0.60 176 0.57 144 0.56 109 0.58 77 0.62 50 0.67 26 0.72 6 0.78 -10 0.82 -24 0.87 -37 0.91 -52 dB 13.06 12.90 12.69 12.57 12.51 12.38 12.15 11.70 11.25 10.73 9.95 8.86 7.75 6.49 5.24 3.96 2.68 1.08 -1.16 S21 Mag. 4.50 4.42 4.31 4.25 4.22 4.16 4.05 3.84 3.65 3.44 3.14 2.77 2.44 2.11 1.83 1.58 1.36 1.13 0.88 Ang. 168 158 138 118 97 76 55 33 13 -10 -32 -53 -73 -93 -110 -128 -146 -165 177 dB -37.72 -32.04 -26.38 -22.97 -20.72 -18.94 -17.79 -17.08 -16.65 -16.25 -16.25 -16.77 -17.39 -18.56 -19.91 -21.51 -23.10 -24.88 -28.64 S12 Mag. 0.01 0.03 0.05 0.07 0.09 0.11 0.13 0.14 0.15 0.15 0.15 0.15 0.14 0.12 0.10 0.08 0.07 0.06 0.04 Ang. 79 71 56 40 23 6 -12 -30 -44 -60 -76 -91 -104 -117 -126 -134 -139 -147 -153 Note: 1. Gmax = MAG for K > 1 and Gmax = MSG for K ≤ 1. K – 0.11 0.16 0.24 0.32 0.42 0.51 0.58 0.69 0.79 0.85 0.91 1.00 1.08 1.19 1.31 1.38 1.42 1.38 1.63 Gmax[1] dB 25.46 22.46 19.50 17.77 16.61 15.67 14.98 14.38 13.96 13.50 13.10 12.52 10.82 9.85 9.24 9.07 9.03 9.28 9.06 2.4 24 2.0 20 1.6 16 1.2 12 0.8 8 0.4 4 0 0 2 4 6 8 0 10 12 14 16 18 FREQUENCY (GHz) Figure 5. ATF-36163 Minimum Noise Figure and Associated Gain vs. Frequency for VDS = 2.0 V, ID = 10 mA. 24 20 16 GAIN (dB) Rn/ZO 0.38 0.31 0.25 0.20 0.15 0.12 0.10 0.07 0.07 0.09 0.12 0.19 0.30 0.42 0.57 0.76 1.10 Fmin (dB) ATF-36163 Typical Noise Parameters Common Source, ZO = 50 Ω, VDS = 2.0 V, ID = 10 mA Freq. Fmin Ga Γopt GHz dB dB Mag. Ang. 2 0.46 18.60 0.84 28 3 0.50 16.75 0.76 41 4 0.54 15.55 0.67 56 5 0.59 14.20 0.61 70 6 0.63 13.37 0.55 88 7 0.68 12.12 0.49 103 8 0.74 11.35 0.39 118 9 0.80 10.59 0.33 135 10 0.86 10.11 0.23 165 11 0.94 9.57 0.17 -145 12 1.02 9.08 0.18 -93 13 1.11 8.59 0.24 -47 14 1.22 8.30 0.34 -16 15 1.35 8.29 0.47 5 16 1.51 8.32 0.58 19 17 1.69 8.07 0.60 34 18 1.92 7.68 0.66 50 S22 Mag. Ang. 0.55 -9 0.55 -18 0.53 -35 0.50 -52 0.44 -70 0.38 -90 0.31 -112 0.21 -137 0.13 -168 0.10 115 0.18 61 0.29 32 0.37 12 0.46 -5 0.53 -19 0.60 -30 0.65 -40 0.71 -50 0.78 -63 Ga (dB) Freq. GHz 0.5 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 MSG 12 MAG |S21|2 8 4 0 0 2 4 6 8 10 12 14 16 18 FREQUENCY (GHz) Figure 6. Maximum Available Gain, Maximum Stable Gain & Insertion Power Gain vs. Frequency for VDS = 2.0 V, ID = 10 mA. 6 ATF-36163 Typical Scattering Parameters, Common Source, ZO = 50 Ω, VDS = 2 V, ID = 15 mA S11 Mag. Ang. 0.99 -12 0.98 -22 0.96 -43 0.92 -63 0.86 -85 0.79 -108 0.73 -133 0.65 -160 0.59 173 0.55 141 0.56 107 0.58 75 0.63 49 0.68 26 0.73 6 0.78 -11 0.83 -24 0.88 -38 0.91 -52 dB 13.85 13.70 13.45 13.29 13.16 12.96 12.67 12.13 11.63 11.06 10.23 9.11 8.00 6.75 5.49 4.22 2.99 1.42 -0.79 S21 Mag. 4.93 4.84 4.70 4.62 4.55 4.45 4.30 4.04 3.81 3.57 3.25 2.86 2.51 2.17 1.88 1.63 1.41 1.18 0.91 Ang. 168 157 137 117 96 75 53 32 11 -11 -32 -53 -73 -92 -110 -127 -145 -164 178 dB -38.42 -32.40 -26.74 -23.48 -21.31 -19.58 -18.42 -17.72 -17.27 -16.83 -16.77 -17.14 -17.72 -18.71 -20.00 -21.41 -22.73 -24.44 -27.96 S12 Mag. 0.01 0.02 0.05 0.07 0.09 0.11 0.12 0.13 0.14 0.14 0.15 0.14 0.13 0.12 0.10 0.09 0.07 0.06 0.04 Ang. 79 71 56 40 24 7 -10 -28 -42 -57 -72 -87 -99 -112 -121 -129 -135 -143 -149 Note: 1. Gmax = MAG for K > 1 and Gmax = MSG for K ≤ 1. K – 0.12 0.17 0.26 0.35 0.46 0.55 0.62 0.75 0.84 0.90 0.96 1.04 1.11 1.20 1.30 1.35 1.36 1.31 1.50 Gmax[1] dB 26.10 23.11 20.13 18.40 17.22 16.26 15.54 14.93 14.46 13.95 13.50 11.93 10.85 10.00 9.45 9.30 9.31 9.56 9.44 2.4 24 2.0 20 1.6 16 1.2 12 0.8 8 0.4 4 0 0 2 4 6 8 0 10 12 14 16 18 FREQUENCY (GHz) Figure 7. ATF-36163 Minimum Noise Figure and Associated Gain vs. Frequency for VDS = 2 V, ID = 15 mA. 24 20 16 GAIN (dB) Rn/ZO 0.37 0.31 0.25 0.19 0.15 0.11 0.09 0.08 0.07 0.09 0.13 0.21 0.32 0.44 0.60 0.79 1.10 Fmin (dB) ATF-36163 Typical Noise Parameters Common Source, ZO = 50 Ω, VDS = 2.0 V, ID = 15 mA Freq. Fmin Ga Γopt GHz dB dB Mag. Ang. 2 0.48 18.97 0.83 28 3 0.52 17.27 0.74 41 4 0.56 15.75 0.67 56 5 0.61 14.54 0.60 71 6 0.65 13.68 0.55 89 7 0.70 12.47 0.46 104 8 0.76 11.66 0.37 118 9 0.82 10.94 0.31 136 10 0.88 10.44 0.21 168 11 0.95 9.88 0.15 -137 12 1.03 9.38 0.18 -85 13 1.12 8.90 0.25 -41 14 1.23 8.63 0.36 -13 15 1.35 8.59 0.48 7 16 1.49 8.63 0.58 20 17 1.65 8.68 0.65 34 18 1.86 8.32 0.70 51 S22 Mag. Ang. 0.51 -9 0.50 -18 0.48 -35 0.45 -52 0.40 -69 0.33 -90 0.26 -112 0.17 -136 0.09 -171 0.09 93 0.19 51 0.30 27 0.38 9 0.47 -7 0.54 -20 0.61 -31 0.66 -41 0.72 -51 0.78 -63 Ga (dB) Freq. GHz 0.5 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 MSG 12 MAG |S21|2 8 4 0 0 2 4 6 8 10 12 14 16 18 FREQUENCY (GHz) Figure 8. Maximum Available Gain, Maximum Stable Gain & Insertion Power Gain vs. Frequency for VDS = 2 V, ID = 15 mA. 7 ATF-36163 Typical “Off” Scattering Parameters, Common Source, ZO = 50 Ω,VDS = 0 V, VGS = 0 V Freq. GHz 0.5 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 Mag. 0.998 0.993 0.99 0.98 0.96 0.94 0.92 0.89 0.86 0.84 0.83 0.83 0.85 0.86 0.87 0.90 0.93 0.93 0.93 S11 Ang. -10 -20 -37 -55 -74 -95 -118 -142 -168 162 128 94 64 36 12 -8 -24 -39 -53 dB -46.02 -39.17 -32.77 -28.64 -25.35 -22.62 -20.45 -18.79 -17.02 -15.70 -14.85 -14.66 -14.85 -15.76 -17.14 -18.71 -20.45 -23.35 -27.96 S21 Mag. 0.01 0.01 0.02 0.04 0.05 0.07 0.10 0.12 0.14 0.16 0.18 0.19 0.18 0.16 0.14 0.12 0.10 0.07 0.04 Ang. 80 81 75 67 56 42 27 11 -6 -24 -44 -64 -83 -101 -116 -129 -140 -154 -161 dB -46.02 -39.17 -32.77 -28.64 -25.19 -22.50 -20.45 -18.71 -17.02 -15.70 -14.85 -14.66 -14.85 -15.76 -17.08 -18.71 -20.45 -23.10 -28.18 S12 Mag. 0.01 0.01 0.02 0.04 0.06 0.08 0.10 0.12 0.14 0.16 0.18 0.19 0.18 0.16 0.14 0.12 0.10 0.07 0.04 S22 Ang. 86 83 76 68 57 42 27 11 -5 -24 -44 -64 -83 -101 -115 -129 -140 -152 -161 Mag. 0.703 0.701 0.70 0.71 0.73 0.74 0.75 0.77 0.78 0.81 0.83 0.84 0.85 0.87 0.89 0.89 0.90 0.90 0.90 Ang. 170 160 139 119 99 81 63 46 30 16 3 -10 -22 -34 -44 -53 -62 -71 -81 ATF-36163 Typical “Off” Scattering Parameters, Common Source, ZO = 50 Ω, VDS = 2.0 V, VGS = -1.5 V Freq. GHz 0.5 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 S11 Mag. 0.97 0.98 0.99 0.98 0.97 0.96 0.94 0.92 0.89 0.85 0.79 0.74 0.72 0.71 0.75 0.82 0.89 0.91 0.92 Ang. -8 -16 -30 -43 -57 -72 -87 -103 -119 -136 -158 177 149 114 74 35 5 -21 -42 dB -34.89 -28.87 -22.85 -19.33 -16.71 -14.42 -12.62 -10.90 -9.60 -8.09 -6.73 -5.85 -5.71 -6.54 -8.95 -12.80 -18.49 -24.88 -27.54 S21 Mag. 0.02 0.04 0.07 0.11 0.15 0.19 0.23 0.29 0.33 0.39 0.46 0.51 0.52 0.47 0.36 0.23 0.12 0.06 0.04 Ang. 82 74 59 44 29 14 -2 -20 -37 -56 -79 -106 -136 -170 155 123 94 79 70 dB -34.89 -28.87 -22.97 -19.33 -16.71 -14.47 -12.65 -10.96 -9.63 -8.09 -6.73 -5.87 -5.71 -6.52 -8.92 -12.69 -18.20 -24.44 -27.96 S12 Mag. 0.02 0.04 0.07 0.11 0.15 0.19 0.23 0.28 0.33 0.39 0.46 0.51 0.52 0.47 0.36 0.23 0.12 0.06 0.04 S22 Ang. 81 73 59 44 30 14 -2 -20 -37 -56 -79 -106 -136 -170 156 123 95 84 69 Mag. 0.999 0.998 0.995 0.98 0.97 0.95 0.94 0.92 0.89 0.83 0.79 0.75 0.73 0.74 0.79 0.85 0.90 0.91 0.90 Ang. -7 -14 -29 -43 -57 -74 -91 -107 -125 -148 -174 156 123 86 50 18 -8 -30 -50 8 1.9 dB 1.4 dB 1.3 dB 1.2 dB 1.1 dB 9.5 dB 10.5 dB 11.5 dB Figure 9. Smith Chart with Noise Figure and Available Gain Circles at 12 GHz, VDS = 1.5 V, ID = 10 mA. Phase Reference Planes The positions of the reference planes used to measure SParameters and to specify Γopt for the Noise Parameters are shown in Figure 10. As seen in the illustration, the reference planes are located at the extremities of the package leads. REFERENCE PLANES SOT-363 PCB Layout A PCB pad layout for the miniature SOT-363 (SC-70) package used by the ATF-36163 is shown in Figure 11 (dimensions are in inches). This layout provides ample allowance for package placement by automated assembly equipment. The layout is shown with a nominal SOT-363 package footprint superimposed on the PCB pads. 0.026 TEST CIRCUIT 0.075 Figure 10. Reference Planes. 0.035 0.016 Figure 11. PCB Pad Layout (Dimensions in Inches). 9 Package Dimensions Outline 63 (SOT-363/SC-70) 1.30 (0.051) REF. 2.20 (0.087) 2.00 (0.079) 1.35 (0.053) 1.15 (0.045) 0.650 BSC (0.025) 0.425 (0.017) TYP. 2.20 (0.087) 1.80 (0.071) 0.10 (0.004) 0.00 (0.00) 0.30 REF. 1.00 (0.039) 0.80 (0.031) 0.25 (0.010) 0.15 (0.006) 10° 0.30 (0.012) 0.10 (0.004) DIMENSIONS ARE IN MILLIMETERS (INCHES) Part Number Ordering Information Part Number ATF-36163-TR1 ATF-36163-BLK No. of Devices Container 3000 100 7" Reel antistatic bag 0.20 (0.008) 0.10 (0.004) 10 Device Orientation TOP VIEW REEL END VIEW 4 mm 8 mm 36 CARRIER TAPE 36 36 36 USER FEED DIRECTION COVER TAPE Tape Dimensions and Product Orientation For Outline 63 P P2 D P0 E F W C D1 t1 (CARRIER TAPE THICKNESS) Tt (COVER TAPE THICKNESS) K0 8° MAX. A0 DESCRIPTION 5° MAX. B0 SYMBOL SIZE (mm) SIZE (INCHES) CAVITY LENGTH WIDTH DEPTH PITCH BOTTOM HOLE DIAMETER A0 B0 K0 P D1 2.24 ± 0.10 2.34 ± 0.10 1.22 ± 0.10 4.00 ± 0.10 1.00 + 0.25 0.088 ± 0.004 0.092 ± 0.004 0.048 ± 0.004 0.157 ± 0.004 0.039 + 0.010 PERFORATION DIAMETER PITCH POSITION D P0 E 1.55 ± 0.05 4.00 ± 0.10 1.75 ± 0.10 0.061 ± 0.002 0.157 ± 0.004 0.069 ± 0.004 CARRIER TAPE WIDTH THICKNESS W t1 8.00 ± 0.30 0.255 ± 0.013 0.315 ± 0.012 0.010 ± 0.0005 COVER TAPE WIDTH TAPE THICKNESS C Tt 5.4 ± 0.10 0.062 ± 0.001 0.205 ± 0.004 0.0025 ± 0.00004 DISTANCE CAVITY TO PERFORATION (WIDTH DIRECTION) F 3.50 ± 0.05 0.138 ± 0.002 CAVITY TO PERFORATION (LENGTH DIRECTION) P2 2.00 ± 0.05 0.079 ± 0.002 www.semiconductor.agilent.com Data subject to change. Copyright © 1999 Agilent Technologies 5965-4747E (11/99)