Bussmann® OPTIMA™ OPM-CC Overcurrent Protection Module Physical Characteristics: • Holds Buss® LP-CC or other Buss Class CC fuses. • Small size matches 45mm IEC starter width. • Rated for #18 - #10 gauge wire, both stranded and solid, and a variety of dual wire combinations. • 3 pole version. • Phil/slot screws. • Pressure plate terminations. Catalog Symbol: OPM-CC Ampere Rating: 30A or less Voltage Rating: 600 Volts AC (or less)* Interrupting Rating: 200,000A RMS Agency Approvals: UL Listed, UL512, Guide IZLT, File E14853 CSA Certified, C22.2 No. 39, Class 6225-01, File 47235 Housing and Module: UL Recognized high performance thermoplastic. Flammability: 94 VO *Contact Bussmann for DC ratings. Safety Features: • Rejection of non-Class CC fuses. • Blown fuse indicators. • Safety handle. • Finger safe terminals. • Removable module for convenient fuse loading. • 35mm Din-rail or screw mount. • Dead-front construction. No exposed contacts with module installed. • Padlockable. Millimeters (± 0.38) Inches (± 0.015) Dimensional Data 13.5 .5 14.5 .6 Current-Limitation: • The Class CC fuse affords a high degree of current-limitation. • Provides Type 2 protection for motor starters (when used with properly sized LOW-PEAK® Class CC fuses from Bussmann). 53.9 2.1 40.7 1.6 44.7 1.8 24.6 .97 36.5 1.4 93.9 3.7 97.8 3.9 59.9 2.4 44.7 1.8 25.9 1.0 38.8 1.5 114.0 4.5 88.1 3.5 88.1 3.5 44.7 1.8 111.3 4.4 12-28-98 SB98107 Rev. A 98.4 3.9 CE logo denotes compliance with European Union Low Voltage Directive (50-1000 VAC, 75-1500 VDC). Refer to BIF document #8002 or contact Bussmann Application Engineering at 314-527-1270 for more information. Form No. OPM-CC Page 1 of 2 BIF Doc #1100 Bussmann® OPTIMA™ OPM-CC Overcurrent Protection Module Spare Fuseholder for Class CC fuses. Part No. 5TPH 75.57 2.98" 26.16 1.03" SPARE FUSE HOLDER BODY DOUBLE SIDED ADHESIVE TAPE 15.88 .63" Available only in bulk quantities. The only controlled copy of this BIF document is the electronic read-only version located on the Bussmann Network Drive. All other copies of this document are by definition uncontrolled. This bulletin is intended to clearly present comprehensive product data and provide technical information that will help the end user with design applications. Bussmann reserves the right, without notice, to change design or construction of any products and to discontinue or limit distribution of any products. Bussmann also reserves the right to change or update, without notice, any technical information contained in this bulletin. Once a product has been selected, it should be tested by the user in all possible applications. 12-28-98 SB98107 Rev. A Form No. OPM-CC Page 2 of 2 BIF Doc #1100