ETC RA104S

Ordering number:EN4762
PNP/NPN Epitaxial Planar Silicon Transistors
RA104S/RC104S
Switching Applications
(with Bias Resistances)
Applications
Package Dimensions
· Switching circuits, inverter circuits, interface circuits,
driver circuits.
unit:mm
2033A
[RA104S/RC104S]
Features
2.2
4.0
3.0
· On-chip bias resistances (R1=10kΩ, R2=47kΩ).
· Compact package (SPA).
15.0
0.6
1.8
0.4
0.5
0.4
0.4
0.7
( ) : RA104S
3
1 : Emitter
2 : Collector
3 : Base
SANYO : SPA
1.3
0.7
1 2
1.3
3.0
3.8
Specifications
Absolute Maximum Ratings at Ta = 25˚C
Parameter
Symbol
Conditions
Ratings
Unit
Collector-to-Base Voltage
VCBO
(–)50
V
Collector-to-Emitter Voltage
VCEO
VEBO
(–)50
V
(–)6
V
VIN
(–)30
V
IC
(–)100
mA
Collector Current (Pulse)
ICP
(–)200
mA
Collector Dissipation
300
mW
Junction Temperature
PC
Tj
150
˚C
Storage Temperature
Tstg
–55 to +150
˚C
Emitter-to-Base Voltage
Input Voltage
Collector Current
Electrical Characteristics at Ta = 25˚C
Parameter
Collector Cutoff Current
Symbol
Conditions
Ratings
min
typ
max
Unit
ICBO
VCB=(–)40V, IE=0
(–)0.1
µA
ICEO
VCE=(–)40V, IB=0
(–)0.5
µA
Emitter Cutoff Current
IEBO
VEB=(–)5V, IC=0
(–)125
µA
DC Current Gain
hFE
VCE=(–)5V, IC=(–)5mA
fT
VCE=(–)10V, IC=(–)5mA
Gain-Bandwidth Product
Output Capacitance
Marking : RA104S : A104, RC104S : C104
Cob
VCB=(–)10V, f=1MHz
(–)67
(–)88
70
250
MHz
(200)
MHz
3.5
pF
(5.3)
pF
Continued on next page.
Any and all SANYO products described or contained herein do not have specifications that can handle
applications that require extremely high levels of reliability, such as life-support systems, aircraft’s
control systems, or other applications whose failure can be reasonably expected to result in serious
physical and/or material damage. Consult with your SANYO representative nearest you before using
any SANYO products described or contained herein in such applications.
SANYO assumes no responsibility for equipment failures that result from using products at values that
exceed, even momentarily, rated values (such as maximum ratings, operating condition ranges,or other
parameters) listed in products specifications of any and all SANYO products described or contained
herein.
SANYO Electric Co.,Ltd. Semiconductor Bussiness Headquaters
TOKYO OFFICE Tokyo Bldg., 1-10, 1 Chome, Ueno, Taito-ku, TOKYO, 110-8534 JAPAN
31599TH (KT)/53094TH (KOTO) A8-9756 No.4762–1/4
RA104S/RC104S
Continued from preceding page.
Parameter
Collector-to-Emitter Saturation Voltage
Collector-to-Base Breakdown Voltage
Collector-to-Emitter Breakdown Voltage
Symbol
Conditions
VCE(sat) IC=(–)10mA, IB=(–)0.5mA
V(BR)CBO IC=(–)10µA, IE=0
V(BR)CEO IC=(–)100µA, RBE=∞
Input OFF-State Voltage
VIN(off)
Input ON-State Voltage
Input Resistance
VIN(on)
R1
Resistance Ratio
R1/R2
VCE=(–)5V, IC=(–)100µA
VCE=(–)0.2V, IC=(–)5mA
Ratings
min
typ
(–)0.1
max
(–)0.3
(–)50
Unit
V
V
(–)50
V
(–)0.6
(–)0.8
(–)1.0
(–)0.7
(–)1.0
(–)2.0
V
V
7
10
13
kΩ
0.213
Electrical Connection
No.4762–2/4
RA104S/RC104S
No.4762–3/4
RA104S/RC104S
Specifications of any and all SANYO products described or contained herein stipulate the performance,
characteristics, and functions of the described products in the independent state, and are not guarantees
of the performance, characteristics, and functions of the described products as mounted in the customer's
products or equipment. To verify symptoms and states that cannot be evaluated in an independent device,
the customer should always evaluate and test devices mounted in the customer's products or equipment.
SANYO Electric Co., Ltd. strives to supply high-quality high-reliability products. However, any and all
semiconductor products fail with some probability. It is possible that these probabilistic failures could
give rise to accidents or events that could endanger human lives, that could give rise to smoke or fire,
or that could cause damage to other property. When designing equipment, adopt safety measures so
that these kinds of accidents or events cannot occur. Such measures include but are not limited to protective
circuits and error prevention circuits for safe design, redundant design, and structural design.
In the event that any or all SANYO products(including technical data,services) described or
contained herein are controlled under any of applicable local export control laws and regulations,
such products must not be expor ted without obtaining the expor t license from the authorities
concerned in accordance with the above law.
No part of this publication may be reproduced or transmitted in any form or by any means, electronic or
mechanical, including photocopying and recording, or any information storage or retrieval system,
or otherwise, without the prior written permission of SANYO Electric Co., Ltd.
Any and all information described or contained herein are subject to change without notice due to
product/technology improvement, etc. When designing equipment, refer to the "Delivery Specification"
for the SANYO product that you intend to use.
Information (including circuit diagrams and circuit parameters) herein is for example only ; it is not
guaranteed for volume production. SANYO believes information herein is accurate and reliable, but
no guarantees are made or implied regarding its use or any infringements of intellectual property rights
or other rights of third parties.
This catalog provides information as of March, 1999. Specifications and information herein are subject to
change without notice.
PS No.4762–4/4