Module no:1726037 LabelId:1726037 Operator:Phoenix 16:18:03, Donnerstag, 28. Juni 2001 MKKDSNH 1,5 MKKDSN 1,5 Double level terminal block with offset levels Pitch 5.0 or 5.08 (IEC) 2 [mm ] rigid solid flexible stranded AWG I U [A] [V] Connection data 0.14-1.5 0.14-1.5 26-16 13.5 250 H CA Description Printed circuit screw termination blocks, 5.0 mm pitch, with housing interlocking, color: green Printed circuit screw termination blocks, 5.08 mm pitch, with housing interlocking, color: green Printed circuit screw termination blocks, 5.08 mm pitch, with housing interlocking, color: green No. of positions Dim. a [mm] 2 Type Order No. Pcs. Pkt. 5 MKKDSN 1,5/2 17 26 03 7 50 3 10 MKKDSN 1,5/3 17 26 05 3 4 15 MKKDSN 1,5/4 17 26 11 8 5 20 MKKDSN 1,5/5 17 26 12 1 6 25 MKKDSN 1,5/6 17 26 13 4 7 30 MKKDSN 1,5/7 17 26 14 7 8 35 MKKDSN 1,5/8 17 26 15 0 2 5.08 MKKDSN 1,5/2-5,08 17 26 04 0 3 10.16 MKKDSN 1,5/3-5,08 17 26 06 6 4 15.24 MKKDSN 1,5/4-5,08 17 26 16 3 5 20.32 MKKDSN 1,5/5-5,08 17 26 17 6 6 25.40 MKKDSN 1,5/6-5,08 17 26 18 9 7 30.48 MKKDSN 1,5/7-5,08 17 26 19 2 8 35.56 MKKDSN 1,5/8-5,08 17 26 20 2 2 10.16 MKKDSNH 1,5/2-5,08 17 31 82 8 3 15.24 MKKDSNH 1,5/3-5,08 17 31 83 1 4 20.32 MKKDSNH 1,5/4-5,08 17 31 85 7 50 50 Accessories (1) Marker card, with 12 pcs., 10-section marker strips, white, self-adhesive, for 120 terminal blocks Phoenix Contact Elektronischer Katalog SK 5/3,8... or SK 5,08/3,8... (see info) Page 1 / 3 Module no:1726037 LabelId:1726037 Operator:Phoenix 16:18:03, Donnerstag, 28. Juni 2001 Technical data see description Dimensions Pitch [mm] 5.0 / 5.08 Hole diameter [mm] 1.3 Pin dimensions [mm] 0.5 x 1 Technical data in accordance with IEC / DIN VDE – Insulation material group I Surge voltage category / contamination class –/– III / 3 III / 2 II / 2 Rated voltage [V] 250 320 630 [kV] 4 4 4 Rated surge voltage 2 13.5 / 1.5 2 13.5 / 1.5 Nominal current / cross section [A]/[mm ] Maximum load current / cross section [A]/[mm ] Connection capacity solid / stranded / conductor sizes 2 2 [mm ]/[mm ]/AWG stranded with ferrules without / with plastic collar 0.14 - 1.5 / 0.14 - 1.5 / 26 - 16 2 0.25 - 1.5 / 0.25 - 1.5 2 0.14 - 0.75 / 0.14 - 0.75 2 0.25 - 0.5 2 [mm ] Multiple connection (2 conductors with same cross section) solid / stranded [mm ] stranded with ferrules without plastic collar [mm ] stranded with TWIN ferrules with plastic collar [mm ] 0.5 - 1* / 0.5** [mm] 6 Stripping length Internal cylindrical gage (IEC 947-1:1988) – A1 Thread – M3 Torque [Nm] 0.5 - 0.6 PA Insulation material V0 (V2)*** Inflammability class acc. to UL 94 130 /120 (125 / 100)*** Temperature indices RTI/Ti Approval data (UL and CSA) Nominal voltage / current / conductor sizes UL: [V] / [A] / AWG 300 / 10 / 30-14 CSA: [V] / [A] / AWG 300 / 10 / 28-14 * level 1 / ** level 2 / *** MKKDSN 1,5/… Articles printed in bold can be delivered at short notice. Products with black or gray housing available on request. Note: In order to avoid tolerances between the terminal blocks and the printed circuit board, the terminal row should be interrupted when the number of positions exceeds 30. Dimensional drawing Phoenix Contact Elektronischer Katalog Page 2 / 3 Module no:1726037 LabelId:1726037 Operator:Phoenix 16:18:03, Donnerstag, 28. Juni 2001 MKKDSNH 1,5 Drilling diagram MKKDSN 1,5 Phoenix Contact Elektronischer Katalog Page 3 / 3