PRICE INFORMATION AND ORDERING Horizontal 975H Series ● Block double decker sockets ● 5.0mm pitch ● In-line pins ● Closed ends Plug and Socket Connectors In-line 1550 Series Vertical 1700 Series ● Plug-in header ● 3.81mm pitch ● Rising clamp mechanism Part number Number of poles 20.975H/** 2-24 poles **Insert required No. of poles ● Plug-in header ● 3.81mm pitch ● Rising clamp mechanism Part number Number of poles 21.1550/** 2-20 poles **Insert required No. of poles Part number Number of poles 21.1700/** 2-20 poles **Insert required No. of poles Ratings UL 1059 CSA 22.2 No.158 DIN VDE 0627 UL 1059 CSA 22.2 No.158 DIN VDE 0627 UL 1059 CSA 22.2 No.158 DIN VDE 0627 Rated voltage 300 V 300 V 250 V Rated voltage 300 V 300 V 160 V Rated voltage 300 V 300 V 160 V Rated current 15 A 15 A 12 A (T60) Rated current 8A 8A 9 A (T60) Rated current 8A 8A 9 A (T60) Wire size AWG 28-16 AWG 28-16 1.5mm2 Wire size AWG 28-16 AWG 28-16 Rating impulse voltage/dirt level 4.0 kV/3 Rating impulse voltage/dirt level 4.0 kV/3 Rated torque/screw size 0.4 Nm/M2 1.5mm2 Rating impulse voltage/dirt level 4.0 kV/3 Rated torque/screw size 0.4 Nm/M2 Maximum rated cross section Single wire (solid) Stranded wire (flexible) Stranded wire with ferrules 1.5mm2 1.0mm2 1.0mm2 Single wire (solid) Stranded wire (flexible) Stranded wire with ferrules 1.5mm2 1.0mm2 1.0mm2 Materials Insulating material Flammability class Temperature range Contact PIN PA UL94 V-0 -30˚C/+105˚C Cu Colour Green RAL 6018 Insulating material Flammability class Temperature range Terminal block Contact Colour Green PA UL94 V-0 -30˚C/+105˚C CuZn CuSn RAL 6018 Insulating material Flammability class Temperature range Terminal block Contact Colour Green PA UL94 V-0 -30˚C/+105˚C CuZn CuSn RAL 6018 Dimensions Spacing PCB hole diameter 5.0mm 1.4mm Spacing Stripped length 3.81mm (3.5mm) 7.0mm Spacing Stripped length 10.4 Px3.81 22 Px5+1.4 3.81mm 7.0mm Px3.5 15.5 5 (P-1)x5 Options: ■1 2 3.5 (3.81) 10 6.6 3.5 3.2 6.6 1.75 (2.3) 19.1 38.5 11.1 (P-1)x3.81+4.6 (P-1)x3.5(3.81) P = No. of poles 1.9 P = No. of poles Options: ● 3.5mm pitch ● Printed terminals ● Coding IMO the EMECH specialist 3.81 Options: ● Printed terminals ● Coding P = No. of poles