Transistor 2SA1533 Silicon PNP epitaxial planer type For low-frequency driver amplification Complementary to 2SC3939 Unit: mm 5.0±0.2 4.0±0.2 ● 0.7±0.2 ● 8.0±0.2 ■ Features High collector to emitter voltage VCEO. Optimum for the driver stage of a low-frequency and 25 to 30W output amplifier. (Ta=25˚C) Parameter Symbol Ratings Unit Collector to base voltage VCBO –80 V Collector to emitter voltage VCEO –80 V Emitter to base voltage VEBO –5 V Peak collector current ICP –1 A Collector current IC – 0.5 A Collector power dissipation PC 1 W Junction temperature Tj 150 ˚C Storage temperature Tstg –55 ~ +150 ˚C ■ Electrical Characteristics +0.15 0.45 –0.1 1.27 1.27 +0.15 0.45 –0.1 2.3±0.2 ■ Absolute Maximum Ratings 13.5±0.5 0.7±0.1 1:Emitter 2:Collector 3:Base TO–92NL Package 1 2 3 2.54±0.15 (Ta=25˚C) Parameter Symbol Conditions min typ max Unit µA ICBO Collector to base voltage VCBO IC = –10µA, IE = 0 –80 V Collector to emitter voltage VCEO IC = –100µA, IB = 0 –80 V Emitter to base voltage VEBO IE = –10µA, IC = 0 –5 hFE1* VCE = –10V, IC = –150mA 90 50 Forward current transfer ratio VCB = –20V, IE = 0 – 0.1 Collector cutoff current V 220 hFE2 VCE = –5V, IC = –500mA Collector to emitter saturation voltage VCE(sat) IC = –300mA, IB = –30mA – 0.2 – 0.4 Base to emitter saturation voltage VBE(sat) IC = –300mA, IB = –30mA – 0.85 –1.2 Transition frequency fT VCB = –10V, IE = 50mA, f = 200MHz 85 Collector output capacitance Cob VCB = –10V, IE = 0, f = 1MHz 11 *h FE1 100 V V MHz 20 pF Rank classification Rank Q R hFE1 90 ~ 155 130 ~ 220 1 Transistor 2SA1533 PC — Ta IC — VCE 1.2 IC — IB –1.2 –1.2 IB=–10mA –1.0 0.8 –8mA –7mA – 0.8 0.6 –6mA –5mA – 0.6 0.4 –4mA –3mA – 0.4 0.2 – 0.6 –1mA – 0.2 40 60 80 100 120 140 160 0 0 –2 –1 Ta=75˚C 25˚C –25˚C – 0.03 –10 –30 –10 –3 25˚C Ta=–25˚C –1 75˚C – 0.1 – 0.003 – 0.03 –3 –10 –30 –100 –300 –1000 – 0.01 –1 Collector current IC (mA) –3 –10 40 20 0 1 3 10 30 100 300 Emitter current IE (mA) 1000 –10 200 Ta=75˚C 25˚C 150 –25˚C 100 50 –3 –10 –30 –100 –300 –1000 Collector current IC (mA) ICBO — Ta 104 IE=0 f=1MHz Ta=25˚C 50 –8 250 0 –1 –100 –300 –1000 VCB=–20V 103 ICBO (Ta) ICBO (Ta=25˚C) 60 Collector output capacitance Cob (pF) 80 60 –6 VCE=–10V Cob — VCB VCB=–10V f=200MHz Ta=25˚C 100 –30 –4 300 Collector current IC (mA) fT — IE 120 –2 Base current IB (mA) IC/IB=10 – 0.3 – 0.01 – 0.001 –1 0 hFE — IC –100 Base to emitter saturation voltage VBE(sat) (V) –3 – 0.1 –8 VBE(sat) — IC IC/IB=10 – 0.3 –6 Collector to emitter voltage VCE (V) VCE(sat) — IC –10 –4 Forward current transfer ratio hFE 20 Ambient temperature Ta (˚C) Collector to emitter saturation voltage VCE(sat) (V) – 0.8 0 0 Transition frequency fT (MHz) –1.0 – 0.4 –2mA – 0.2 0 2 –9mA VCE=–10V Ta=25˚C Collector current IC (A) 1.0 Collector current IC (A) Collector power dissipation PC (W) Ta=25˚C 40 30 20 102 10 10 0 –1 1 –3 –10 –30 –100 Collector to base voltage VCB (V) 0 60 120 180 Ambient temperature Ta (˚C) Transistor 2SA1533 ICEO — Ta 105 Area of safe operation (ASO) –10 VCE=–10V Single pulse Ta=25˚C –3 Collector current IC (A) ICEO (Ta) ICEO (Ta=25˚C) 104 –1 ICP IC t=10ms – 0.3 103 t=1s – 0.1 102 – 0.03 – 0.01 10 – 0.003 1 0 20 40 60 80 100 120 140 Ambient temperature Ta (˚C) – 0.001 – 0.1 – 0.3 –1 –3 –10 –30 –100 Collector to emitter voltage VCE (V) 3 Request for your special attention and precautions in using the technical information and semiconductors described in this material (1) An export permit needs to be obtained from the competent authorities of the Japanese Government if any of the products or technologies described in this material and controlled under the "Foreign Exchange and Foreign Trade Law" is to be exported or taken out of Japan. (2) The technical information described in this material is limited to showing representative characteristics and applied circuit examples of the products. It does not constitute the warranting of industrial property, the granting of relative rights, or the granting of any license. (3) The products described in this material are intended to be used for standard applications or general electronic equipment (such as office equipment, communications equipment, measuring instruments and household appliances). Consult our sales staff in advance for information on the following applications: • Special applications (such as for airplanes, aerospace, automobiles, traffic control equipment, combustion equipment, life support systems and safety devices) in which exceptional quality and reliability are required, or if the failure or malfunction of the products may directly jeopardize life or harm the human body. • Any applications other than the standard applications intended. (4) The products and product specifications described in this material are subject to change without notice for reasons of modification and/or improvement. At the final stage of your design, purchasing, or use of the products, therefore, ask for the most up-to-date Product Standards in advance to make sure that the latest specifications satisfy your requirements. (5) When designing your equipment, comply with the guaranteed values, in particular those of maximum rating, the range of operating power supply voltage and heat radiation characteristics. Otherwise, we will not be liable for any defect which may arise later in your equipment. Even when the products are used within the guaranteed values, redundant design is recommended, so that such equipment may not violate relevant laws or regulations because of the function of our products. (6) When using products for which dry packing is required, observe the conditions (including shelf life and after-unpacking standby time) agreed upon when specification sheets are individually exchanged. (7) No part of this material may be reprinted or reproduced by any means without written permission from our company. Please read the following notes before using the datasheets A. These materials are intended as a reference to assist customers with the selection of Panasonic semiconductor products best suited to their applications. Due to modification or other reasons, any information contained in this material, such as available product types, technical data, and so on, is subject to change without notice. Customers are advised to contact our semiconductor sales office and obtain the latest information before starting precise technical research and/or purchasing activities. B. Panasonic is endeavoring to continually improve the quality and reliability of these materials but there is always the possibility that further rectifications will be required in the future. Therefore, Panasonic will not assume any liability for any damages arising from any errors etc. that may appear in this material. C. These materials are solely intended for a customer's individual use. Therefore, without the prior written approval of Panasonic, any other use such as reproducing, selling, or distributing this material to a third party, via the Internet or in any other way, is prohibited. 2001 MAR