S UBMINIA TURE FUSES UBMINIATURE WICKMANN T2CP / No. 397 UL 248-14, 125V 125V,, T Specifications Time-Current Characteristic Packaging Transient Tolerant (T) 000: Tape/Ammopack (1400 pcs.) 044: Short Leads - Bulk (1400 pcs.) Standard Materials UL 248-14 CSA C22.2 No. 248.14 Base/Cap: Brown Thermoplastic Polyamide PA 6.6, UL 94V0 Round Pins: Copper alloy, tin plated Approvals UL Listed: File No. E 67006 cUL Listed: File No. E 67006 -40ºC to +85ºC (consider de-rating) Features max. 4 max. 8 8,5 Climatic Category Surge Proof for telecom applications Reduced PCB space requirements Direct solderable or plug-in versions Low internal resistance Shocksafe casing Vibration resistant Dimensions (mm) Operating TTemperature emperature -25ºC/+70ºC/21 days (EN 60068-1..3) Stock Conditions +10ºC to +60ºC relative humidity ≤ 75% yearly average, without dew, maximum value for 30 days-95% Vibration Resistance WebLinks 24 cycles at 15 min. each (EN 60068-6) 10 - 60Hz at 0.75mm amplitude 60 - 2000Hz at 10g acceleration Data Sheet 0,5 min www.wickmann.com/products/397.pdf 1,5 5,08 Lead Pull Strength Approval Certificates 10N (EN 60068-2-21) www.wickmann.com/approvals Solderability Time-Current Curve 1 +0,1 L ∅ 0,6 260ºC, ≤ 3 sec. (Wave) 350ºC, ≤ 1 sec. (Hand) Page 59 www.wickmann.com/itcurves Soldering Heat Resistance Packaging Holes in PCB Page 118 www.wickmann.com/pack Long Leads (L=18.8mm) Short Leads (L=4.3mm) 260ºC, 10 sec. (IEC 60068-2-20) Marking , T2CP, T, Current Rating FaxBack Document # 303 Unit Weight 0.60g (approx.) Limits for Pre-arcing Time < 60s 80ms ... 2s < 200ms Permissible continuous operating current is ≤ 70% at ambient temperature of 23ºC (73.4ºF). Rated Amp Voltage Breaking Voltage Drop Power Dissipation Melting Integral 1.0 x IRated 10 x IRated Current Code Rating Capacity 1.0 x IRated max. (mV) max. (mW) min. (A2s) 350mA 500mA 800mA 1.00A 1.25A 1.50A 1 FCC 47 Part 68: ITU-T K.20: Bellcore GR-1089: 0350 0500 0800 1100 1125 1150 50A / 125VAC 50-60Hz cos ϕ = 1.0 400 340 300 240 200 190 140 170 240 240 250 285 0.38 0.79 2.4 3.5 5 8.5 34 46 105 122 175 175 20 26 60 70 100 100 30 40 90 105 150 150 • • • • • • • • • • • • Minimum pulse load quantity is 2 pulses at a test generator output of 800V and 10x560µs waveform. Minimum pulse load quantity is 30 pulses at a test generator output of 1000V, 67A and 10x700µs waveform. Minimum pulse load quantity is 50 pulses at a test generator output of 1000V and 10x1000µs. Order Information 000801 125V 125V 125V 125V 125V 125V Surge Amplitude (A)1 Approvals cUL 350mA ... 1.50A UL 17 x IRated ITU 5.7 x IRated Bellcore 2.0 x IRated FCC Rated Current Qty. WebSite: www.wickmann.com FaxBack: +1 (404) 699-6176 OrderNumber Series 397 Amp Code Packaging • Europe Tel: +49 (2302) 662-107 • Americas Tel: +1 (404) 699-7820 • Asia Tel: +852 26 14-1108 E-mail: [email protected] E-mail: [email protected] E-mail: [email protected] S UBMINIA TURE FUSES UBMINIATURE WICKMANN 10 T2CP / No. 397 0 ,0 00 I-t C harac te ristic s (M in-M ax Lim it) 10 U L 24 8-1 4 T es t v alu e ,0 0 0 1 ,0 00 10 10 Time (sec.) 0 1 0 .1 0 .0 1 1 1 .5 2 3 4 5 6 7 8 9 10 15 I Fault / IRated Contact WICKMANN for individual I-t curves 000801 WebSite: www.wickmann.com FaxBack: +1 (404) 699-6176 • Europe Tel: +49 (2302) 662-107 • Americas Tel: +1 (404) 699-7820 • Asia Tel: +852 26 14-1108 E-mail: [email protected] E-mail: [email protected] E-mail: [email protected]